Dryers Dealers in Sector 60, Noida

We are offering heat of compression air dryer. with the assistance of our dexterous team, we are involved in offering an extensive range of heat of compression type air dryers. In these dryers the compressed air is directly taken to air dryer with the inlet using insulated pipelines. This is achieved at the 120o c, which is the minimum temperature. After, which the hot air is passed through one drying vessel where saturated desiccant is regenerated by this hot air. Further, after picking up moisture from desiccant bed, the air is cooled in an intermediate cooler, wherein the moisture is condensed and removed by auto drain valve. As these are cooled to 40oc, this air passes through the second drying vessel, where the balanced moisture gets adsorbed after, which the dry air comes out. The cycle time of this process includes 4 hours regeneration & 4 hours drying. Moreover, after this 4 hours cycle the changeover of vessels takes place automatically. Further, in this regeneration cycle heating of the bed requires only 2 hours, and thereafter the bed is cooled by dry air. Thus, after the bed cooling, the dry air is again cooled to 40oc in another cooler, which is delivered out of unit as dry air at 40o c temp. Salient features no power requirement for regeneration. No loss of compressed air. Maintenance is easy as there are no blower, no heaters, and no moving parts. Maintains desiccant adsorption capacity to give (-) 400c dew point for almost 5 years. Low-pressure drop across the dryer- less than 0. 3kg/cm2. Skid mounted construction on channel base frame. Fully automatic, continuous operation. Negligible operating cost. It neither requires electric power for regeneration, nor there is any loss of compressed air technical specifications: air capacity 500 to 6000 nm3/hr dew point up to (-)40oc

The heatless type dryer is designed to take advantage of the natural tendency to dessicant to established equilibrium with their surrounding and can deliver super dry compessed air. these type of dryers are the most economical and dew poins upto (-)40 °c are easily achieved. such dryers are mostly preffered for flow upto 500 cfm.Features: Excellent functionality High efficiency Superior performance Robust construction Specifications: Capacity: 20 CFM to 500 CFM Dew Point: -40 to -60 deg C ADP Purge Loss: 12-15 % Process: In this dryer two desiccant towers are used. While one tower is in drying, second tower undergoes regeneration simultaneously. Part of dry air coming out from tower in-line goes for regeneration of the second tower. Tower changeover takes place at every 5 minutes by a sequence controller mounted in control panel.

• Type: Hand Dryer, Automatic Hand Dryer
• Brand Name: PERK
• Material: Plastic, ABS Plastic
• Certification: PERK
• Weight: 400-500gm
• Color: White
• Feature: Attractive Designs, Energy Saving Certified, Hanging Loop, High Air Flow, Light Weight, Low Power Consumption, Quick Dry, Stable Performance
• Frequency: 50HZ
• Automatic Grade: Automatic
• Power: Electric
• Warranty: No Warranty
• Country of Origin: India
• Color: White
• Name: Perk Automatic ABS Hand Dryer
• FAST DRYING HAND DRYER : -: Impressive wind speed takes only seconds to dry your hands.
• STRONG AIR AND HEATS UP QUICK :: Impressive high speed 1800 Watts,Voltage : 220V (50Hz-60Hz), 15m/s wind speed hand dryer,dries your hand within 15 -20 seconds, 3 times faster than conventional ones, t

Hot air dryer at reduced temperature condense into water droplets and are removed in water separator. as it travels through the system does not fall below the dew point temperature produced in the dryer, no more water vapours will condense into troublesome liquid in downstream air lines.

• Waste Processing Capacity: upto 500 kg/day
• 3/day): upto 10 m
• Electricity Consumption: 1.5 kw/day
• Usage/Application: Industrial
• Application: Dryer
• Features: Easy to clean, Energy efficient

gas dryers, Air Dryers, low pressure dryers, psa nitrogen plants

• Material: Stainless steel
• Automation Grade: Automatic
• Voltage: 230 V
• Phase: Single
• Brand Name: PRECIMOULD
• Capacity: 25kg 50kg 75kg 100kg
• Design: Standard

M.S. Fabricated Dryers available upto 6 ft. Diameter and 3.5 m width Shell thickness varies from 25 to 36 mm Heavy duty framing both in M.S and C.I. available Pressure testing up to 10 Kg/cm2 Perfect round before machining so as to get even cut during machining results in uniform evaporation. Rope feeding arrangement is also provided as per client requirement Dynamic Balancing Gear both in M.S. and C.I. available

receiver drier Receiver Drier, Casting, Rubber Parts, etc. All related markets for these products are managed by AGS. We focus on offering complete guidance to foreign manufacturers under a relaxed setup. All plans are framed in accordance with the company’s wish and market desires.

Hand Dryers, single disk scrubber machines, room freshner, Toilet Rolls

Spray Dryers, Dairy Equipment, Dairy Evaporators, milk processing plants

Heatless Type Desiccant Dryers, oil free compressor, Screw Air Compressor