Dryers Dealers in Sector 64, Noida

This is a simple alternative for medium & bigger capacities where Heatless Dryer become uneconomical due to heavy purge losses. In this type of dryer the regeneration is accomplished with a very small portion of dried air/gas, which is circulated in the tower duly filled with desiccant and embedded with heating elements. The advantage to this type of dryer is that purge loss is reduced to almost 3-5% dew point upto (-80oC) can be achieved.   Details : This is improved version of heat less dryer where purge air loss is very very low due to regeneration is achieved by dry air at low pressure and at high temperature. To achieve this heaters are provided in each tower to heat the purge air to around 180 Deg C, which enhances its moisture carrying capacities. This hot purge air at low pressure is passed through the desiccant bed to regenerate the Activated Alumina.Features : Capacity -  200 CFM to 1000 CFM Dew Point -  -60 to -80 deg C ADP Purge Loss -  5-10

• Material: Stainless steel
• Automation Grade: Automatic
• Voltage: 230 V
• Phase: Single
• Brand Name: PRECIMOULD
• Capacity: 25kg 50kg 75kg 100kg
• Design: Standard

• Capacity: 5 Kg to 5000 Kg per Hour
• Automatic Grade: Automatic, Semi-Automatic
• Design: Customized
• Features: Used for concentrating substances, Operates under hygienic conditions, Easy to clean

• Type: Hand Dryer, Automatic Hand Dryer
• Brand Name: PERK
• Material: Plastic, ABS Plastic
• Certification: PERK
• Weight: 400-500gm
• Color: White
• Feature: Attractive Designs, Energy Saving Certified, Hanging Loop, High Air Flow, Light Weight, Low Power Consumption, Quick Dry, Stable Performance
• Frequency: 50HZ
• Automatic Grade: Automatic
• Power: Electric
• Warranty: No Warranty
• Country of Origin: India
• Color: White
• Name: Perk Automatic ABS Hand Dryer
• FAST DRYING HAND DRYER : -: Impressive wind speed takes only seconds to dry your hands.
• STRONG AIR AND HEATS UP QUICK :: Impressive high speed 1800 Watts,Voltage : 220V (50Hz-60Hz), 15m/s wind speed hand dryer,dries your hand within 15 -20 seconds, 3 times faster than conventional ones, t

Tray dryer .the offered dryer is commonly used for various industrial drying applications in different industries such as food processing. Manufactured in accordance with the industry set standards, the offered dryers are known for their rich attributes such as long term functional life, ease of installation and maintenance, user friendly operation, and minimal noise. Specifications: dimension(l*w*h): 20 fit x 4.5 fit x 8 fit dc motor : 4 hp weight : 2000 kg

We are offering continuous dryer. Leveraging on our sophisticated manufacturing facility, we are offering a wide array of continuous dryer. To manufacture our offered range of dryers, we make use of best quality raw material and advanced machinery. These dryers are commonly used to dry namkeens and other snack items. Offered machines are known for their sturdy construction and longer functional life. Features: easy to operate optimum performance highly durability dust collector is attached specifications: power(w): 5.5-75kw dimension(l*w*h): as per client weight: 3.6-104.6t capacity: 1-36 th motor power: 5.5-75 kw

receiver drier Receiver Drier, Casting, Rubber Parts, etc. All related markets for these products are managed by AGS. We focus on offering complete guidance to foreign manufacturers under a relaxed setup. All plans are framed in accordance with the company’s wish and market desires.

• FEATURES: Insulated container to prevent heat loss, Equipped with highly isolated blower for long life spam, Insulated chamber to prevent heat loss heater, Lightweight & robust construction of equipment suitable for both offline & online application.

REFRIGERATED TYPE COMPRESSED AIR DRYER As the temperature of air reduces, its water vapour holding capacity comes down drastically. This principle is employed in Refrigerated type dryers. Compressed air is cooled by refrigeration system thereby reducing its water vapour holding capacity. Water vapours above the holding capacity at reduced temperature condense into water droplets and are removed in water separator. The resultant compressed air becomes dry to pressure dew point equal to its reduced temperature (generally around+2°C to +8°C). As long as the temperature of compressed air, as it travels through the system does not fall below the dew point temperature produced in the dryer, no more water vapours will condense into troublesome liquid in downstream air lines.

M.S. Fabricated Dryers available upto 6 ft. Diameter and 3.5 m width Shell thickness varies from 25 to 36 mm Heavy duty framing both in M.S and C.I. available Pressure testing up to 10 Kg/cm2 Perfect round before machining so as to get even cut during machining results in uniform evaporation. Rope feeding arrangement is also provided as per client requirement Dynamic Balancing Gear both in M.S. and C.I. available

Compressed air with saturated water vapor enters the dryer’s pre-cooling device, in which, the entered hot air is cooled down by the outgoing cold air partly, thus reducing the load on the system (this process is pre-cooling). Pre-cooled air enters the evaporator. Here, heat released by the air is absorbed by media and the air reaches the pre-set temperature (2 ~ 4oC). After being cooled, the water vapor in the air condenses into droplets and is separated from the air by steam separator and then flows out of the dryer through automatic drainer. Leaving the separator, cold air enters into the pre-cooling device’s shell side for heat exchange with hot air in the inlet and leaves the dryer after being heated to a temperature about 10oC lower than that of the inlet air. This reheating prevents the second moisture condensation in the outside exit air pipeline and downstream pipeline, increases the energy of the air and improves the effectiveness. In addition, after passing through the dryer, solid dust of over 3μ in the compressed air is all filtered, and the air source quality reaches the clean and dry requirements.   Salient Features Economical in power consumption in comparison with other type of dryers for equivalent dew point. Innovative Heat Exchanger ensure max. Heat transfer & low pressure drop. In built safety devices for compressor, condenser etc. Consistent Dew point over wide range of flows. Simple design, easy access to all parts requiring almost no maintenance. Modular skid mounted unit in robust industrial cabinet is prewired and piped. Inbuilt air, electrical & drain connection. The dryer is ready to start saving your money. High quality product due to stage wise inspection & testing before dispatch.

We are offering heat of compression air dryer. with the assistance of our dexterous team, we are involved in offering an extensive range of heat of compression type air dryers. In these dryers the compressed air is directly taken to air dryer with the inlet using insulated pipelines. This is achieved at the 120o c, which is the minimum temperature. After, which the hot air is passed through one drying vessel where saturated desiccant is regenerated by this hot air. Further, after picking up moisture from desiccant bed, the air is cooled in an intermediate cooler, wherein the moisture is condensed and removed by auto drain valve. As these are cooled to 40oc, this air passes through the second drying vessel, where the balanced moisture gets adsorbed after, which the dry air comes out. The cycle time of this process includes 4 hours regeneration & 4 hours drying. Moreover, after this 4 hours cycle the changeover of vessels takes place automatically. Further, in this regeneration cycle heating of the bed requires only 2 hours, and thereafter the bed is cooled by dry air. Thus, after the bed cooling, the dry air is again cooled to 40oc in another cooler, which is delivered out of unit as dry air at 40o c temp. Salient features no power requirement for regeneration. No loss of compressed air. Maintenance is easy as there are no blower, no heaters, and no moving parts. Maintains desiccant adsorption capacity to give (-) 400c dew point for almost 5 years. Low-pressure drop across the dryer- less than 0. 3kg/cm2. Skid mounted construction on channel base frame. Fully automatic, continuous operation. Negligible operating cost. It neither requires electric power for regeneration, nor there is any loss of compressed air technical specifications: air capacity 500 to 6000 nm3/hr dew point up to (-)40oc

Adsorption dryers (Heatless) are designed with the consistent efforts of our professional team and the vast knowledge that they owe. These dryers’ works on a twin-tower alternative operation mode when the compressed air enters the dryer’s tower A through valve 1A. The air is then dehydrated and dried under the adsorption action of the adsorption use.

Under the process division, we are supplying various types of industrial compressors such as reciprocating, centrifugal, sliding vane designs for air & gases application. Apart from being the sales representative for the principal companies that we represent, with network coverage in all metros, we have a well established team for service & spares that enable us give the client local support sought. We are also supplying industrial blowers & fans to meet all the requirements of various process industries. We are also able to take up jobs for Air separation plants, i.e. oxygen plants, Nitrogen plants etc. Working on cryogenic technology, PSA or VPSA methods. Our principal company is one of the major suppliers of Air separation plants in the world and have done a few jobs in India as well. We ensure desired purity at optimum project cost. Other products include AIR & GAS DRYRES & Accessories and AUTOMATIC SELF CLEANING FLUID STRAINERS, which are used for critical applications where the flow of the fluid cannot be stopped for cleaning of the filter element.

continuous electric dryer, Soya Nuggets Extruder, paddle mixer machine

Spray Dryers, Dairy Equipment, Dairy Evaporators, milk processing plants

Rider On Scrubber Driers, Vacuum Cleaner Tools, Steam hose pipe