Envirotech Systems Pvt. Ltd. Sector 51, Noida, Uttar Pradesh

Fabric acoustic panels have excellent acoustic performance in both mid and high frequency sound. They are decorative and easy to install. The fabrics on the surface are available in different types and a wide range of colors and patterns. Customers can also provide their own fabrics and designs, and the panels can be made into different shapes.

Country of Origin : India

Type : Wrapped Fabric Panels

Color : As per customer requirement

Brand Name : Envirotech

Application : Sound Absorbers, Sound Diffusers, Noise Barriers, Sound Reflectors

ENVIRO 16/16/6 panel is a simple union between perforations in a high recyled content.16/16/6 focuses the sound absorption spectrum in the mid range frequencies while maintaining some o f the higher frequencies.

Pattern : 32/32/8;32/32/6;16/16/6;16/16/6;16/16/3;8/8/3;8/8/1;10/10/1

Envirotech is a powerful union between architecture and acoustical performance. Utilizing 3mm grooves in high recycled content. Envirotech Wooden Acoustic Panels are high performance acoustical products with an exceptional visual appearance. Acoustical wood panels come in a variety of configurations to meet all interior and acoustical requirements, provide balanced sound reflection and absorption through groove and perforations. Acoustic insulation pads can be used to increase NRC values as per Acoustic Consultant’s design

Country of Origin : India

Type : Wooden Grooved Acoustic Panels

Application : School Etc

Color : As per customer requirement

Pattern : 13/3; 14/2; 28/4; 59/5; 6/2; 5/3; 4/3

Brand Name : Envirotech

Door Frame :- Supply of 140 minute fire rated of Hard wood / Red Mirantee door frame of section 120mmX65mm with heat activated incumescent fire seal strip of size 10mm X 4mm and one coat of anti-termite fire retardant primer.Door Shutter :- Supply of Envirotech make120 minute fire rated Wooden Door Shutters as per IS-3614 Part-2 and BS 476 PART-2 for single & double leaf doors duly tested from CBRI Roorkee or from laboratory approved by engineer in charge with 55mm thick asbestos free composite fire / smoke check wooden shutter of 120 minute fire rating comprising of two 10mm thick calcium silicate boards, 100% without asbestos , having density not more than 1150 kg/m3 and thermal conductivity 0.14 W/m*K sandwiching 25mm thick fire resistance insulation mineral wool filler coated with FR silicon sealant and faced with 3mm thick commercial ply facing on both side with heat activated intumescent fire seal strip of size 10mm X 4mm mounted in the grooves of hardwood lipping on all side except bottom.

Material : Wood

Color : As Per Client Requirement

Pattern : Plain

Position : Exterior, Interior

Open Style : Sliding, Folding

Surface Finishing : Polished

envirotech wood wool tiles made of wood fiber lmm width magnesium composites 15/25mm natural premium as per the choice of the colour of the architect/ person in charge of size 595x595 mm. As per iso: 354-1985 and astm 423-90 a, density 400 kg/ m3, meets stringent fire ratings astmd-876 and fire class -1 as per bs 476 part 5 and 6,class p-not easily ignitable as per 8s-476-part 5 (ignitability for material).this is applicable for core and class 1 as per bs 476-part 7 (method for classification of surface spread of flame) , weather resistance as per is 3308, thermal insulation as per is:3346 with relative humidity of 90% rh at 60o celsius(140o fahrenheit) for 15 days= no deterioration. Conforms to en 13168 and is rosh complaint. Can be installed on t24 grid system of 0.6mm thick main t length minimum 3000mm, web minimum 35mm to be placed at 600mm center to center and secondary cross t of length 600mm web minimum 35mm inter locked, wire support for main tto be taken at every 1200mm length wise and 600mm application : auditorium,conference rooms,office,gymnasiums,schools,lecture center, etc.

Country of Origin : India

Size : 200 X 200mm, 300 X 300mm, 400 X 400 Mm, 600 X 600mm, Multisizes

Type : Wood Tiles

Material : Wood & Wool

Shape : Square

Application : Exterior Tiles, HOTEL, Interior Tiles, RESTAURANT

Color : Available In Many Colors

Feature : Acid Resistant, Heat Resistant, Non Toxic

Surface Treatment : Polished

Brand Name : Envirotech

We design & manufacture the high quality Vent Silencers that attenuate the high noise produced by the expansion of Gas, Steam or Air at elevated temperatures to atmospheric pressure. All vent silencers are designed & manufactured as per clients' requirements and specifications. These are generally customized in nature. Venting of pressurized gases to the atmosphere can generate noise as high as 170 dB (A) and can be reduced to level as low as 75 dB (A) at 1 meter distance with the proper installation of vent silencer.

Country of Origin : India

Type : Vent Silencers

Material : stainless steel(SA 516),mild steel

Size : 100NB - 1000NB inner pipe

Brand Name : Envirotech

use for : Reduce Noise in Safety Valves (PSV),Relief Valves (PRV),starter valves,blow valves Etc

The Turbine acoustic enclosure comprises of collapsible type Acoustic Wall and Roof Panels assembled on bolted structure. The enclosure will be provided with soundproof doors and glass windows in adequate numbers. To take away the heat built up inside the enclosure, forced ventilation package with ventilation exhaust blower, ventilation intake silencer and ventilation exhaust silencer will be provided. The openings that are required for piping, cables etc., will be acoustically sealed. Provisions for electrical and fire fighting system shall also be made.

Type : Enclosures

Material : Turbine Acoustic Enclosure

Shape : Rectangular

Color : As Per Customer Requirement

Brand Name : Envirotech

Envirotech turbine expertise includes the design and manufacturing of containment damper sets used in Turbine Enclosures. Our Turbine Enclosures have collapsible walls and roof panels. These panels are bolted together to form the acoustic structure. All the panels are acoustically treated and comply with the noise level regulations. The turbine enclosure has windows and doors which are soundproof.   Turbine Acoustic Enclosures are equipped with a fire detection system that releases a suppressant to put out a fire. The enclosure ventilation inlet is equipped with a single-stage, disposable, barrier-type filter unit equipped with a delta alarm switch. The ventilation exhaust opening is equipped with back-draft dampers to prevent ingress of dust when the unit is not running.

Country of Origin : India

Application : Industrial, Sound Absorbers

Color : As per customer requirement

Condition : New

we are counted amongst the dependable thermal insulated enclosures exporters from india. The insulated sound proof enclosures are made up of excellent quality materials and advanced technology that ensures efficient performance in biomedical and pharmaceutical applications that require operating temperatures of 4°c and 37°c. The robust structure and resistivity to adverse condition has also attracted various national as well as international clients. Moreover, the thermal acoustic insulated enclosures offered by us are available in cold room series models, different sizes to meet the requirements of mobile step-in units to large stability storage areas including multiple air handlers. Applications stability and shelf life studiescell and tissue cultureraw material, bulk product storage and conditioninggeneral laboratory incubation and pharma sterility studiesanimal holding chambersinsect rearing and controlled growththermal cyclingproduct stress testing and burn intappi / astm product test chambers

Country of Origin : India

Shape : Rectangular

Color : As per customer requirement

Thickness : 20-40mm

Usage : External Walls, Windows, Roofs, Foundation, etc

Brand Name : Envirotech

Supplying Envirotech Door make steel Fire shutter with Fire Rating of 120 minutes rating as per manufacturers specification and similar to the prototype tested in accordance with IS 3614 Part-2 BS 476 Part-22.Door Frame are made with 1.6mm thick galvanized steel sheet pressed to single rebate profile of size 125 x 60mm.Door Shutter are made with 1.25mm thick galvanized steel sheet pressed formed to provide a 46mm thick fully flush double skin panel shall with lock seam joint at style edges and filled with ceramic wool (96 kg/cum density) honey comb structure with reinforcement at top, bottom and stile surround. The items also include provision for required iron monger and finished with zinc phosphate storing primer & polyurethane paint.

Material : Steel

Shape : Rectangular

Thickness : 10-20 mm

Application : Hospital, Office

Color : Available in many colors

Pattern : Plain

Finishing : Polished

Open Style : Hinged, Sliding

Our organization is providing Soundproof Acoustic Enclosure (canopy) for all types of generator sets. These enclosures help in reducing the noise level to permitted limits, which do not, create noise pollution, and also protect the generators from atmospheric dirt and water. Our enclosures are weatherproof as well as corrosion resistant as these are manufactured using high-grade raw material to suit the requirements of offices and other places.  These are soundproof enclosures with low noise (70 to 75 DBA)at 1 meter. These are sufficient air for engine aspiration and proper heat dissipation as the fans maintain proper crossflow. Specially designed residential silencers maintain a low noise level. Proper cooling system. These are vibration-free because of providing anti-vibration mountings as well as flexible bellows.  

Type : Soundproof Acoustic Enclosure

Application : Sound Absorber

Country of Origin : India

Material : MS

Envirotech is an Indian Acoustic Enclosure Manufacturer that provides solutions to noise problems. Acoustic enclosures are designed to suit both indoor and outdoor conditions and can be used for compressors, turbines, blowers, glass breakers, power plants, fin presses, punch presses, DG units, chillers, and more. It meets all noise reduction requirements for DG installations from 5kva to 2,000kva.    

Material : Soundproof Meterial

high density polymer-based, asphalt-free, synthetic soundproofing membrane of 4 mm thick, that offers good acoustic insulation in different building elements. advantages : high acoustic insulation, combined with soft, flexible elements. high sound damping capacity on metal surfaces. flexible. easy to handle and adaptable to uneven surfaces. easy to cut with a knife or scissors good bonding to most of the types of surfaces acts as a vapour control layer cold- and heat-resistance excellent ageing resistance

Country of Origin : India

Type : Sound Insulating Sheet

Application : Sound Reflectors

Density : 2000 Kg/M3

Tensile Strength : >30 N/50mm

Sliding Partition is a flush acoustic folding for space management, which enables utmost operational ease to customers. It’s hung from a ceiling track or propped up with the help of a low profile surface mounted floor track.Double PVC seals fit around these sliding folding partition walls to impart them highest level of acoustic integrity. More so, this fitting also achieves the desired acoustic integrity between flanking rooms.These folding partitions would be supplied in configuration of centre-fold or end-fold to meet various parking needs. All panels will remain constantly hinged whereas the lead panel would be supplied as a standard pass door.

Country of Origin : India

Type : Acoustic Partitions

Brand Name : Envirotech

Material : Aluminium, Glass, Wood

Shape : Rectangular

Color : As per customer requirement

Height : As Per Site

Finishing : Mica

Thickness : 80-100mm

A room which creates free field conditions but above a reflective plane.Above a certain frequency all sound waves that hit the walls or ceiling of the chamber will be absorbed.This type of chamber is normally used in vehicle testing with a rolling round so that the vehicle may be driven. The semi-anechoic chamber then forms a controlled environment with the surrounding acoustic conditions behaving as a sterile version of the real world. In this way accurate measurements of the sound inside and outside the vehicle can be made under operating conditions.

Type : Semi Automatic

Certification : ISO Certified

Voltage : 220V

Application : Industrial Use

Driven Type : Electric

Phase : Double Phase, Single Phase

Warranty : 1 Year

Room acoustics provide noise control with acoustic linings within the walls and ceiling. Accompaniments include acoustic door and soundproof glass. These materials weigh in around 48/64 96kg/m3 which confirms to IS 8183 and BS 476 Part II. The tissue fibers are laminated and covered with GI/AI with perforated sheets (45% perforation). The tiles are pre-coated with micro-perforated clip-in’s which also gives it an edge aesthetically. Air ventilation is also availed to provide maximum airflow to cool and prevent over-heating.Usage for : Engine testing room DG rooms Home theatre

These are absorbent noise reduction barriers or just reflective ones which are effective and durable. High way sounds can be lowered considerably with these. The materials used are usually light weight and are weight sensitive with the longevity to cause noise reduction. They are durable, rust proof, moisture resistant, non-corrosive with a modular design. They are very easy to install and assemble. Envirotech Systems is a renowned manufacturer & supplier of any Road Highway Noise Barrier.Usages For : Roads Highways

Country of Origin : India

Brand Name : Envirotech

We are listed at the apex in the list of the well-reputed rf shielded enclosures exporters from india. The rf shielded test enclosures offered by us are available in both standard modular type as well as customized modular type, made up of high grade rf shielding material to meet the specific requisites of the clients. The modular rf shielded enclosures are ideally designed for "over-the-air" testing by providing radio frequency shielding. The application encompasses receiver sensitivity, emi/emc testing and radiated power measurement. The system is manually operated, durable, high rf field attenuation with optional built-in test fixture. Moreover, this system is extensively used to test mobile phones, remote control, as well as wan, pcmcia, pci and bluetooth pcbs.

Country of Origin : India

Type : Rf Shielded Enclosure

Material : IP

Shape : Rectangular

Color : As per customer requirement

Brand Name : Envirotech

Application : Industrial, Commercial,

Railway noise barriers consist of sound-insulating and sound absorbing elements and are designed to mitigate the noise produced by railway rolling stock. Acoustic Barrier are particularly suitable for installing on railway tracks located near proximity to stations or city centres. These noise barrier wall panels are held together firmly by galvanized metal "H" beam post and hot dip galvanized for corrosion protection.Usages For : Used in nearby Railway tracks Construction noise Industrial noise

Country of Origin : India

Brand Name : Envirotech

Envirotech Portable Anechoic Chamber are preferred by a communications manufacturer to perform acoustic tests on digital assemblies being developed by their acoustics laboratory. This all steel panel construction using the unique cam locking hardware allows this unit to be manufactured and shipped in 3 sections and quickly assemble on the lab floor. The outside dimensions assembled are mm 2337 W x 2337 D x 2413 H ( 92" W x 92" D x 95" H) and the free field area is mm 1499 W x 1499 D x 1499 H (59" W x 59" D x 59" H). Provision was made to place a removable table in the interior to set up and perform experiments. The wedge units are Standard EW wedges, 250 Hz. Cut off frequency. Lighting, cable access ports, vibration isolation and an interior door safety release are included with the unit.

Country of Origin : India

Type : Anechoic Chambers

Application : Industrial

Color : As Per Customer Requirement

Condition : New

Finishing : Powder Coated

Polycarbonate is the most effective material for noise absorption and helps to ensure a quiet atmosphere. Polycarbonate as a material has superior properties which makes it a preferred material as a noise control barrier. Acrylic also has similar properties to polycarbonate and the two are equated at many junctions.Usage For : Highway noise Airport noise Railway Metro lines noise Industrial noise Construction noise

Country of Origin : India

Brand Name : Envirotech

Brand Name : Envirotech

We focused on applications for acoustics, NVH, and vibration analysis. Our engineers working in these fields measure sound and vibration levels to determine whether the engineering redesign or optimization is necessary to meet customer expectations and requirements. The evaluation of sound and vibration, in terms of their impact on the consumer and the surroundings includes not only the objective measurement of noise and vibration, but also the subjective impact. For example, in the automotive industry, this concept may be applied to interior or exterior noise of a car; in the aerospace industry, engineers may perform in-cabin testing or commercial airline flyovers to test ground level noise rating. Engineering specialties in these fields include: Automotive NVH (noise, vibration, and harshness) - the study of unwanted noise and vibration levels including engine, road, wind, electronic seats, brakes, etc.

Country of Origin : India

Application : Industrial Use

Color : As per customer requirement

Brand Name : Envirotech

Material : NVH Chamber / Metal Chambers

We are counted amongst the well-reckoned NVH Test Booth Manufacturers and Exporters from India. The Noise Testing Booth offered by us is ideally designed to meet applications like sound power testing and sound intensity. The use of optimum quality materials and advanced technology also makes the Noise Testing Booths effective for controlling the ambient noise and increasing the accuracy of intensity measurement by reducing sound reflections. Additionally, customers are eased with the availability of the Online Noise Testing Booth that is used in application areas like automotive sector, air-conditioner manufacturing units, refrigeration units, fan, motors & compressors manufacturing units, speaker testing etc.

Country of Origin : India

Type : Noise Testing Booth

Material : Wooden

Shape : Ractangular

Application : Industrial

Color : As Per Customer Requirement

Thickness : 0.5 mm

The noise test chamber is used for check the noise level. It is a quiet room and is used for a number of different purposes as well. The main functionality of a noise control booth is to eliminate the shop floor noise. The isolation of the noise test booth with acoustic material all around prevents the floor noise from penetrating the enclosure.We, have a wide range of designs that are used for R&D labs that develop intricate products. These booths primarily function to provide an ambient zone that helps in the assessment of vibration and noise. This also helps in equipping the chamber for improved performances, serving to a high level of accuracies. They are quite useful in automotive, refrigeration and AC industry et al. The booth can also be custom designed to achieve ambient resolution up to 15dB (A). It provides proper fabrication with supply. Site installation can be availed with the quality test as per the requisite. Other industries where this can be used are electric motors, transformers, speaker testing, and compressor manufacturing units.

Country of Origin : India

Certification : CE Certified

Brand Name : Envirotech