Fatigue Testing Machine Dealers

• Maximum Bending Moment: 200 (kg. cm)
• Bending Moment Adjustable: 100, 150 & 200 (kg. cm)
• Gripping Specimen Diameter: 12 mm
• Test Specimen Diameter: 8mm
• Rotating Speed: 4200 RPM
• Accuracy & Applied Bending Moment: + 1%
• Revolution Counter: 8 digit (Digital)
• Power Required: 0.5 HP
• Motor Specification: 3ph,0.5HP,440V,50Hz
• Machine Dimension (L W H): 1000x560x900 MM
• Test Specimen Mounting Height: 850 mm
• Weight Approx.: 150 kg

• Voltage: 220V
• Driven Type: Digital
• Warranty: 2years
• Automation Grade: Automatic
• Application: Fatigue Testing
• Power: 3-6kw

• Max. bending moment (Kg. cm): 200
• Bending moment adjustable (Kg.cm): 25 – 200
• Ranges: 1st – Kg.cm || 2nd – Kg.cm: 25- 125 || 125-200
• Gripping dia of the specimen (mm): 12
• Testing dia of the specimen (mm): 8
• Rotating speed in RPM: 4200
• Accuracy of Applied Bending Moment: ±1%
• Mechanical Counter: No. of digits Multiplying factor: 6 3
• Power required in HP: 0.5
• Main Supply: 3ph 440v 50hz
• Overall size (mm): 1000LX500WX600 H
• Weight (Kg): 120

• Driven Type: Electric
• Capacity: 300 inch lbs
• Speed: 2850 rpm
• Power source: Electric
• Maximum bending movement: 400 kg/cm
• Phase: 3 Phase
• Motor: 0.5 H.P

• Driven Type: Electric
• Automation Grade: Automatic
• Voltage: 220V / 440V
• Weight: 100-300kg
• Warranty: 1year
• Application: Metal Testing
• Power: 1-3kw

This machine is used to test the fatigue strength of materials and to draw S-N diagram by research institute, laboratories, material manufacturers and various industries. This is rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and located such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution. The bending moment is applied with the lever system and can be easily changed by moving a weight over the lever. Total number of revolution at which the specimen fails are recorded by a mechanical counter. An interlocking system puts off the motor at specimen failure. Machine meets requirement of IS 5075-1969.Features Table model, no need of foundation. Simple lever system for changing load. Calibration in Nm available on request. Light weight, Simple design, Compact Size.   NOTE : DUE TO CONSTANT R&D SPECIFICATION AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

• Material: Stainless Steel
• Driven Type: Hydraulic
• Automation Grade: Fully Automatic
• Color: White, Light White, Grey, Brown
• Voltage: 440V
• Warranty: 3years
• Country of Origin: India

Jain Engineers offers an extensive range of axial fatigue testing systems upto 250kN capacity. Incorporating servohydraulic, servo-electric and linear motor technologies, these test instruments cover a broad range of fatigue, dynamic, and static testing applications. These applications include high-cycle fatigue, low-cycle fatigue, thermo-mechanical fatigue, fracture mechanics, crack propagation and growth studies, fracture toughness, bi-axial, axial-torsional, multi-axial, high strain rate, quasi-static, creep, stress-relaxation, and other types of dynamic and static tests. The tests can be performed as per ISO and ASTM standards.

• Power: 380V
• Condition: New
• Type: Testing Machine
• Features: PLC Smart Controlled.
• Frequency: 40 to 300 Hz
• Overall size (mm): 1000L X 500W X 600H

• Load Capacity Options: 5 KN/10 KN/25KN/50 KN/100 KN
• Dynamic rating: 210 Bar supply allowing Dp 70 Bar across the servo valve
• Actuator Stroke options: 50mm/100 mm/250mm
• Load Cell: Suitable range Fatigue type
• Load Resolution: At least 1 in 10000 parts
• Load Accuracy: +/- 0.5% of Reading.
• Length measurement: Linear sensor for actuator travel.
• Length Resolution: 0.01 mm
• Length Accuracy: +/- 0.05 mm
• Servo Valve: As per requirement
• Actuator: Hydraulic with Servo valve and Servo Cylinder Double Acting Type
• Actuator Speed: Programmable from 1 to 500 mm/sec .
• Controller: Kalpak make proprietary
• Column Spacing: Max. up to 500 mm
• Column length: 1000 mm (Different column lengths available on request.)
• Operating/Test Modes.: Tensile/ Compression static as well as fatigue

• Weight: 150-200kg
• Color: Available in Many Colors
• Driven Type: Electric
• Warranty: 1year
• Type: Testing Machine
• Application: Fatigue Testing
• Power: 6-9kw, 9-12kw

Fatigue Testing Machine we offer is extensively used in research institute, laboratories, and also supplied to material manufacturers and diverse industries. We make available the Fatigue Testing Machine which is Table model that does not require a foundation. The Fatigue Testing Machine we offer is light weight, simple in design and high performing. Components & Working Of Impact Testing Machine The rotating beam type machine in which load is applied in reversed bending fashion The standard 8 mm diameter specimen is held in special holders at its ends and located such that it experiences a uniform bending moment The specimen is rotated at 4200 rpm by a motor A complete cycle of reversed stresses in all fibers of the specimen is generated during each revolution The bending moment is applied with the lever system and can be easily changed by moving a weight over the lever Total number of revolution at which the specimen fails is recorded by a mechanical counter An interlocking system puts off the motor at specimen failure Machine meets requirement of IS 5075-1969 Standards 6 digit electronic counters instead of mechanical counter is offered Machine with maximum bending moment upto 400 Kg. cm is also available Fixed with simple lever system for changing load Calibration in Nm also offered Used To Test the fatigue strength of materials Draw S-N diagram

• Brand: Ratnakar
• Weight: 300 Kgs Approx
• Usage/Application: Industrial
• Packaging Type: Box
• Load Capacity: 200KG-CM
• Type Of Testing Machines: ROTARY
• Feature: Damage resistant
• Dia: 8 mm

We have trusted names in the industry in offering a wide range of Fatigue Testing Machine. These products are used to test the fatigue strength of materials and to draw S-N diagram by laboratories, research institutes, material manufacturers and various industries. Additional Information:   Item Code: RFTG8D Production Capacity: 200KG-CM/ 400KG-CM Delivery Time: 5 Packaging Details: WOODEN