Freeze Dryers Dealers in Noida

• Capacity: Above 40 Cfm
• Maximum Pressure: Greater Than 07bar
• Dryer Type: Refrigeration Dryer
• Inlet Air Temperature: 15 To 55 Degree C
• Voltage: 240 V
• Condition: New
• Material: Metal
• Automatic: Semi Automatic
• Power: 10 HP
• Country of Origin: India

Heatless Air Dryer, Membrane Air Dryer, Energy Saving Design, Reduced Power Consumption, Robust in high temperature environments.

We are offering refrigerated air dryer. The basic principle is the removal of moisture by cooling air to certain present temperature. The concept of efficient cooling is removal of heat only. The air first enters into the precooler where the incoming hot air is being cooled by outgoing cold air so as to reduce the heat load of evaporator . The air from precooler enter into the evaporator where further heat is removed by boiling refrigerant like freon. Now the air get condensed and this moist air is passed through a moisture separator where moisture is drained out by centrifugal action of air. The moist free air enters into precooler to cool the incoming air. Salient features: simple and compact design. Automatic cleaning of condenser. Efficient power saving. Least pressure drop. Easy maintenance. Specification: range : 5 to 1000 nm3/hr pressure : 0. 5 to 12. 5 barg. Electrical connection: 415v , 3phase , 50 hz refrigerant: r22 dew point : (-)23.

Compressed air with saturated water vapor enters the dryer’s pre-cooling device, in which, the entered hot air is cooled down by the outgoing cold air partly, thus reducing the load on the system (this process is pre-cooling). Pre-cooled air enters the evaporator. Here, heat released by the air is absorbed by media and the air reaches the pre-set temperature (2 ~ 4℃). After being cooled, the water vapor in the air condenses into droplets and is separated from the air by steam separator and then flows out of the dryer through automatic drainer. Leaving the separator, cold air enters into the pre-cooling device’s shell side for heat exchange with hot air in the inlet and leaves the dryer after being heated to a temperature about 10 ℃ lower than that of the inlet air. This reheating prevents the second moisture condensation in the outside exit air pipeline and downstream pipeline, increases the energy of the air and improves the effectiveness. In addition, after passing through the dryer, solid dust of over 3μ in the compressed air is all filtered, and the air source quality reaches the clean and dry requirements.    

We offers a wide range of refrigerated air dryer which is used to remove moisture from compressed air by reducing the temperature. In this dryer compressed air is passed through a heat interchanger where cold refrigerant at around 3°c is passed through the other side of the heat interchanger. At this temperature most of the moisture is condensed which is then separated and drained out in moisture separator.

Refrigerated air dryers as the temperature of compressed air, as it travels through the system does not fall below the dew point temperature produced in the dryer, no more water vapours will condense into troublesome liquid in downstream air lines.

Having the support of an expert team, we have successfully developed Refrigerated Air Dryers. These dryers worked on the principle of compressed air with saturated water vapor that enters the dryer's pre-cooling device. This air is cooled down with outgoing cold air, thus reducing the load of the system.

• USES: Telecom industry, Pneumatic control systems, Textile industries, Pneumatic tools, Paint industry.
• Features: Economical functioning, low power consumption, Innovative heat exchanger design .

Refrigerated Air Dryers, Industrial Gas Analysers, industrial air dryers

Refrigerator Air Dryer, oil free compressor, Screw Air Compressor

Refrigerated Air Dryer, water cooled scroll chiller