Heat Transfer Lab Equipment Dealers

• Features: High performance Superior design Low power consumption User-friendly functions Used high quality raw material Economic prices

Composite Walls Apparatus We are engaged in offering high quality Composite Walls Apparatus to the esteemed customers These apparatuses are manufactured using genuine raw material, under the able guidance of our team of experts. Moreover, we make sure to timely deliver the ordered products at the customers' end, via our wide distribution network.

A Test rig provided study of a Single Cylinder two stroke petrol engine testing. The rig comprises of Single Cylinder Two Stroke Petrol Engine coupled to a Dynamometer. Apply to various load through Dynamometer. With the help of various measurements provided the test rig. Can determine BHP, IHP, mechanical and thermal efficiencies, air fuel ratio, and specific fuel consumption. • Specifications: • Engine: Single Cylinder Two stroke Air Cooled Petrol Engine • Rope Brake Dynamometer: Belt around water cooled brake drum and spring balance. • Air intake measurement: Air intake reservoir with orifice plate and differential manometer. • Fuel measurement arrangement: Fuel tank mounted on a sturdy iron stand, burette tube, 3-way cock connecting tube. • Multi-channel Digital Temperature Indicator: to Measure the temperature.

The most commonly used law of Thermal Radiation is the Stefan-Boltzmann low which states that the thermal radiation heat flu emitted from a block surface (one which absorbs all the incident radiation falling on it) is proportional to the fourth power of the absolute temperature of the surface and is given by the following equation. (qA) Heat flux in WMsq. = σT = eb4 Where, T is the surface temp. which emits thermal radiation in K And Stefan – Boltzmann constant, σ=5.67 x 10-8 WM sq.—K4 eb = Emissivity power of black surface. The Stefan – Boltzmann low can be derived by integrating planks law,

• Size: all
• Type: ALL
• Brand Name: all
• Country of Origin: PUNE

We are offering In our product range, we offer Heat Transfer Lab Equipments from a pin fin, Thermal conductivity of insulation slab, Stefan Boltzmann Apparatus, Heat transfer through logged pipe, Heat transfer through composite walls, Thermal conductivity of liquids, Heat transfer in forced convection, Heat transfer in natural convection, Thermal conductivity of metal rod, Heat Pipe Demonstrator, Vertical & Horizontal Condenser (steam to water), Vertical & Horizontal Condenser (water to water), Calandria Evaporator, DropwiseFilmwise Condensation Apparatus, Thermal conductivity of insulation powder, Emissivity Measurement Apparatus, Open Pan Evaporator, Shell & Tube Heat Exchanger, Heat transfer in agitated vessel, Single Effect Evaporator, ParallelCounter Flow Heat Exchanger, Unsteady State Heat Transfer Unit, Multi Effect Evaporator, Finned Tube Heat Exchanger.

• Country of Origin: India
• Brand Name: TNEI
• Material: Metal
• Application: Laboratory

Helical coils are used for heating or cooling in process tanks. When a fluid flows through a curved tube, centrifugal force acting upon the various elements of fluid moving with different velocities causes secondary circulation. Secondary flow results in higher heat transfer characteristics. Further, secondary flow stabilizes the laminar flow leading to a higher critical Reynolds number for transition from laminar to turbulent flow.

• Application: Colleges
• Driven: Electric
• Color: White

1/4 HP open type belt driven compressor with motor, fan cooled condenser, fan-cooled evaporator, two check valves, two capillary tubes, reversing valve switch, filter-drier – dual flow, high pressure control, main circuit breaker, duplex receptacle, compressor switch, pilot light, evaporator fan speed control, hardware kit, cold box and courseware. The unit is supplied with a mobile storage cabinet of code-gauge furniture stock steel with 4-inch swivel rubber-tired casters. The unit is charged with R-134a HFC refrigerant.

Heat Transfer Lab Equipments Through Lagged Pipe a. Diameter : 50mm150mm InnerOuter (Approx.) b. Length : 450mm (Approx.) c. Material : G.I. d Quantity : 1 No. Each.. 02. Measuring Instruments a. Digital Voltmeter Range : 0 to 300 V b. Digital Ammeter & Range : 0 to 5 Amps c. Digital Temperature Indicator with Selector switch Range : Ambient to 199.9 Deg. C

High temperature chamber.Preheating temperature range ambient to + 200°C. About 25 minutes. Low temperature chamber.Pre cooling temperature range -40... To -70°C. About 120 minutes. Microprocessor based PLC controller with inbuilt memory, communication software with windows xp support, electric screw drive lifting arrangement.

• Diameter: 0.3 m
• Thickness: 0.012 m
• Dimmerstate: 1000 watt

Total heater assembly comprises of a heater bound between two aluminium plates, on both sides of this heater identical structures of composite wall are placed. Thermocouples are provided at proper position in the composite wall to record desired inside temperature of composite wall. Multichannel temperature indicator is used to measure this temperature. Small hand press provided to press the wall on each other & to ensure that no air gap remaining between two plates. Heat input to heater is given through a variance & measured by voltammeter & ammeter. By varying heat input & combinations of the composite structure wide range of experiment can be performed.

Heat Transfer Through Composite Wall, Heat Transfer Through Lagged Pipe, Heat Pipe Demonstrator, Thermal Conductivity of Insulating Powder, Thermal Conductivity of Metal Rod, Thermal Conductivity of Insulating Slab, Thermal Conductivity of Liquids, Heat Transfer From a Pin-Fin.

Being one of the eminent names in the industry, we are engaged in offering Thermal Lab Equipment to our clients. Our business is located in Delhi, India. At our state of the art unit, we are well-equipped with the modern machines and tools required for manufacturing a high-quality product. We meticulously examine it on various quality norms before forwarding it to the clients. Our offered equipment is easy to install and demands the least of maintenance. It can be availed at a cost-effective rate.

The apparatus consists of main central heater and ring guard heater, sandwiched between the specimens. Cooling plates are provided on the either side clamped between heater and cooling plates. Ring guard heater ensured unidirectional heat from the flow through specimen.

We have numerous dealers and distributors associated with us to make our products available to buyers with ease and make timely delivery. Following the strict packaging guidelines, we make sure that the range of products we offer are packed sternly to evade lossdamage. By this, we ensure that the products are in safe condition during handling, warehousing and transportation.

We are recognized as the premier manufacturers, traders and exporters of Heat Transfer Lab Equipments in India. With a vast experience and in-depth research we have been able to develop and design such Heat Transfer Lab Instruments that are easy to use and easy to understand. All the equipments are manufactured using utmost quality raw material using state-of-the-art technology. Our professionals yearn to develop such products that are durable, user friendly, low in maintenance and cost efficient. Working round the clock to provide client with the best of their requirements we promise to provide 100% customized products as per the needs of the

Determination of Emissivity of non black surface. • Study of variation of Emissivity of test plate with respect to absolute temperature. • Measurement and variation of electrical input with complete panelised instruments. • Elimination of instrumental error by using same measuring instruments for both the plates. • Digital Voltmeter, Ammeter & Temperature Indicator. Space Required : 1m. x 1m.

The setup consists of a brass tube fitted in a rectangular duct in a vertical fashion. The duct is open at the top and bottom, and forms an enclosure and serves the purpose of undisturbed surrounding. One side of the duct is fitted with a transparent good quality Acrylic window for visualization. An electric heating element is kept in the vertical tube that in turns heats the tube surface. The heat is lost from the tube to the surrounding air by natural convection. The temperature of the vertical tube is measure by Temperature Sensors and displayed by a Digital Temperature Indicator with multi-channel switch. The heat input to the heater is measured by a Digital Ammeter and a Digital Voltmeter and is varied by a Variac. The tube surface is polished to minimize the radiation losses.

Heat transfer lab equipment These products are appreciated by the clients in domestic as well international market due to their durability, easy operations, compact designs and robust construction.

• size: 200 mm x 75 mm
• Temperature: 0-199.9°C

Heat transfer lab equipment, Stand Alone Metallic powder coated panel. An industrial Plate Heat exchanger made of SS of size 200 mm x 75 mm, Number of plates are 14. Both Parallel and Counter Flow. Over All Heat transfer Co-Efficient, Effectiveness. Self explanatory Instruction manual with sample calculation.

• Features: Sturdy construction, Excellent finish , Accurate measurement