Humidity Oven Dealers

We have developed humidity control oven in result of its own in-house r&d having backing of years of experience and exposure in pharmaceuticals testing to comply with gmp regulations and ich guideline, so as to match the international standards, the need of present globalization. These chambers are used in stability & self life studies. We are determined and committed to provide high quality products and services, to satisfy the customer before, during andafter the sales in total. construction * interior executed in ss-304 * exterior executed in ss -304 * puf insulation heating systems custom built stainless steel tubular heaters used as heating element. The stainless steel ensure better heat transfer. cooling systems: hermetically sealed compressor, with evaporation coil and condenser protected with time relay.* non-cfc refrigerant. humidification: humidity is controlled by steam injection method. The boiler tank is used for steam generation; electro-magnetic switch is used for sensing the water level. Float valve is used for controlling the inlet water flow in the reservoir tank. air circulation: suitable capacity blower, circulating air throughout the chamber maintains uniformity of temperature &humidity. chamber light fluorescent tube light fittings are provided for internal illumination inside the chamber. trays removable perforated trays are provided, made of 304 stainless steel. controller : microprocessor based programmable pid controller offers fine and accurate control of set parameter. The panel is consisting of data logger capable of storing 5000 records. recommended stability test parameter as per ich guidelines. As per ich guidelines, stability studies are carried out under the following conditions. * long term: at 25°c (± 2°c) and 60% rh(±5%rh) intermediated : at 30°c (±2°c) and 60% rh(±5%rh) accelerated : at 40°c (±2°c) and 75% rh(±5 % rh) documents – dq,iq,oq,&pq and calibration certifications: to comply with the documentation requirements under ich guidelines, we provide dq, iq, oq and pq protocols to be executed before taking the chamber in to for regular use, and support the supply with the following documents with the detail operational and service manual technical data: *temperature range : + 20 °c to + 60 °c *temperature accuracy : +- 0.5 *humidity range : 40% rh to 95% rh *humidity accuracy : 3% rh *alarm : visual alarms. * power supply : 230 v ac, +- 10 %,50hz data acquisition software window base for acquisition of performance data, and to store andmaintain the data folders for future record as well to view the periodical graphic chart,average and mean results, and many more facility as specified under software with 21cfr part 11 compliance.

hese units are fitted with highly accurate controller that allows gentle drying of heat sensitive materials & highly hygroscopic materials. The vacuum ovens can dry faster than the conventional ovens & avoid damage due to rapid temperature overshooting. They come with a separate vacuum release valve to release the vacuum by gentle turn of the knob. An air release inlet is located below the tray to avoid sample disturbance due to air blowing

• Humidity range: 80% to 98% RH
• Temperature Range: Ambient+10°C to 60°C
• Power Supply: 220 Volts 50Hz
• Humidity uniformity: ±3% RH
• Temperature uniformity: ±1°C
• Controller: Microprocessor based PID controller
• Humidification: SS water tank with immersion heater
• Heating: SS air heaters with fins
• Inner chamber: Stainless steel 304
• External cabinet: Powder coated GI sheet
• Safety features: High / low variation alarm,Low water level protection, Over temperature protection .
• Optional: All stainless steel construction,  PLC based color HMI controller,  RS232 computer interface

• Features: Accurate dimension , *Maintenance free

We are the growing company known for offering Humidity Oven to the clients. This product is designed by technically profound engineers; it is equipped with latest safety devices, temperature controller and an efficient cooling and heating system. Offered range is equipped with digital temperature indicating controllers with a suitable sensor for precise temperature control.

VS501 Series are humidity ovens with electronically controlled evaporative humidifier and temperature micro controller. With advanced RH sensors it gives precise humid conditions. Steam injection system is incorporated with stainless steel boiler and reservoir. It has a clear view glass inner door. Motorised blower recirculates air which ensures uniform temperature and humidity inside the chamber. Poly-Urethane is used for efficient insulation. Widely used to test performance of samples in humid atmosphere.

• Material: Metal
• Application: Temperture Humidity Testing
• Certification: Automatic
• Voltage: 380V, 440V
• Condition: New
• Power: 1-3kw, 9-12kw
• Driven Type: Electric
• Warranty: 5years

Conforming to international quality management systems, our product range is of unparalleled value. With the assistance of our hardworking team, we are able to offer a wide range of quality Humidity Control Ovens.

• Material: Metal & Plastic
• Certification: CE Certified
• Voltage: 220V/380V
• Condition: New
• Warranty: 1 Year
• Usage: In Laboratory
• After-sales Service Provided: Spare Parts

Place orders with us, timely deliveries of the same are our prime responsibility! We are backed by a quality control wing that strictly check the lot at all stages right from the production to the final dispatch.   Note : Equipment developed as a result of intensive R & D and confirming to International Standards, suitable for most of environmental conditions.

Product Description We offer a wide range of Humidity Ovens that are manufactured as per the international quality standards and suitable for most of environmental conditions. These humidity ovens are doubled walled constructed and has proper locking arrangement for door. Further, our humidity ovens also have excellent temperature control system to ensure effective mechanism.   Construction: Double walled construction Inner wall: S.S.304/316 grade material Outer wall: S. Steel or GI dully Epoxy Powder coat/finish Gap filled with Glass wool insulation (PUF in situ foam*) Inner full length viewing glass/plexi door or viewing window on outer metallic door provided Leak proof positive locking arrangement for door Chamber illuminated with bulb Cooling -CFC free Refrigeration: By Hermetically sealed brand new ISI marked compressor coupled with air cooled condensing unit fitted with Motor, fan blade, Electrical Accessories etc. Mounted on bottom of unit on heavy base frame Humidity: Humidity Created with Steam & Injection into working chamber Heating: By long lasting S. Steel Tubular Heater with fins Temperature Control: Electronic Digital Temperature Controller-Cum Indicator with Dry Bulb & Wet Bulb Principle. (Direct %RH setting optional)

Introduction: "nova" humidity control oven is providing precise combinational control of all required parameters i.e. Heating, cooling and humidity. User can set it as per requirement any of combination as per the iso and other standards. All models can be run day and night and are capable to maintain set values throught the operation. It can generate & maintain above ambient temp.,below ambient temp. ,and humidity. It is specifically designed for application of various testing under low temp.& with control humidity. Features: - fully automatic, temperature control - easy to operate. - digi.temp.indicator & control - sensitive temperature & humidity sensor - castor wheel for easy moveability. - elegant outlook - glass door to see through. - forced air circulation. - humidity control by dry & wet principal. - digital humidity indication - stainless steel steam boiler. - panel meters- volt & ampere. - suitable for climatic & durable tests. - auto water level control.

• Brand Name: EIE

We are offering humidity oven. Construction : double wall construction interior fabricated of stainless steel(s.s.304). Exterior of corrosion resistant galvnised sheet, finished in powder coated epoxy paint. Full size glass inner door to inspect samples without affecting the chamber temp. Outer double walled metal door with magnetic gasket and lock. Unit mounted on castor wheels for easy movement. Insulation : 70mm polyurethene insulation (puf) fibebopard to ensure better insulation and less leakage of temperature or 10% rh from inner body to the surroundings. Air circulation : temperature is maintained by a quiet running blower circulation air through out the chamber. Forced air circulated vertically down and re circulated through out the chamber for uniform temperature and humidity. Humidity : humidity created by steam injection method. The boiler tank is fitted in the back side of the chamber for better servicing, electro magnetic switch for controlling the wet heater from burning off if water level is not adequate. Float valve provided to control water level in the boiler tank. Heating & cooling system : long lasting ss tubular heaters used as heating element. The stainless steel tins provided to ensure better heat transfer. Hermetically sealed compressor cfc free compressor (134 a gas) coupled with evaporation coil and condensor. Trays : removable perforated trays provided made of s.s. Control : microprocessor based temp and direct rh digital pid controller. Humidity directly measured in % rh by electronic sensor. Temp. Range : 10 to 70°c, accuracy +- 0.5°c humidity range : 40% rh to 90% rh accuracy +- 3% rh chamber size cu. Trays h w d ft. 45 x 45 x 45 3 2 70 x 50 x 50 6 3 90 x 60 x 60 12 3 other sizes available. Optional fittings a. Digital controller with standard pc software and connectivity. b. Datalogger : 4 point temp. + 4 point humidity datalogger with sensors placed at specific points in chamber with printer interface and memory of 1200 readings per channel. c. Additional high temperature safety system to cut-off all heaters with audio-visual alarm ensuring temp. within chamber doesn't exceed +70°c e. Voltage stabiliser

• Features: long duration test, Fast recovery of the set conditions after the door is opened, Humidity directly displayed in % RH, Printer interface facility to print Temperature, Humidity, Date and Time.
• Power: 230 V AC single phase.
• Temperature Range: 20℃ to 80℃ from ambient
• Humidity range: 40% RH to 98% RH
• Accuracy: +0.2℃ and +3% RH
• Size: 45cm x 45cm x 45cm, 57cm x 57cm x 85cm, 60cm x 60cm x 90cm.

• Features: High accuracy, Compact design, Long service life
• Temperature Range: 50-250 Degree Celsius
• Humidity range: From atmospheric humidity to 95 %
• Temp range from ambient: 5C to 60C
• Accuracy: - 0.5 Degree

• Temperature range :: 5* to 60*C

Double walled construction inner chamber made of st. steel and exterior g.i. sheet powder coated. The gap between the two walls filled with glasswool insulation. Cooling is byhermetically sealed compressors with cfc free refrigerant Temperature controlled by microprocessor based auto tune PID digital controller.

• Temperature Range: 15 DEG. C. TO 50 DEG. C – OPERATING 20 DEG.C TO 40 DEG.C.
• Humidity range: 30/35% TO 90/95% RH
• TEMPERATURE RESOLUTION: 0.1 DEG. C.
• TEMPERATURE CONTROL ACCURACY: +/- 1 DEG. C. OR BETTER.
• TEMPERATURE UNIFORMITY: +/- 2 DEG. C. OR BETTER
• RESOLUTION: 1/0.1% RH
• HUMIDITY CONTROL ACCURACY       : +/- 2% OR BETTER
• HUMIDITY UNIFORMITY                   : +/- 5% OR BETTER

introduction: “nova” specially designed microprocessor based pid environmental test chamber can generate & maintain above ambient temperature, below ambient temp. ,and humidity. It is specifically designed for application of various testing under low temp.& with control humidity.   application: these environmental test chambers are used for pharmaceuticals, zoological testing, material & component testing, conditioning of samples, prior to test ,climatic & durable test of electrical & electronic apparatus, control penal, electronic components, chemical testing, as well as tqa requirement test etc. Etc. It can be used as a simulated tropical & extreme tropical conditions. salient features: fully automatic, temperature control - microprocessor pid based. easy to operate. top control penal. obstruction free working space. digital temp. Indicator & control (pid control) sensitive temperature sensor pt-100 type. floor model. castor wheel for easy moveability. elegant outlook, enamel painted/powder coated. glass door/window to see through. forced air circulation. humidity control by humidity sensor. digital humidity indication – direct in % rh. stainless steel steam boiler with solenoid valve. panel meters- volt & ampere. suitable for climatic & durable tests. auto water level control.                                                         environmental test chambers without cooling system can also be supplied. construction: the unit is of double walled construction. The exterior chamber is made of mild steel and finished in non corrosive paint or powder coated and interior chamber is made of heavy gauge polished stainless steel. Between two chamber glass-wool insulation is provided. Glass window is provided to see the operation without disturbing the control condition inside the chamber. An outside metal door with lock is provided. The unit rest on castor wheel.   heating: [a] chamber is heated by long lasting air heater.[b] boiler heater is of immersion type heater.   cooling: using hermatically sealed compressor condensing unit coupled with evaporation coil & fan cooled condensor.   humidity: humidity generated by steam injection near the duck from a boiler connected to water tank fitted with water level controller. Humidity set directly by digital pid controller.   indication & control: digital display indication for temperature & % rh humidity, fully automatic solid state electronic controllers with pt-100 sensors & solid state humidity sensor.   control panel: control panel is provided on the top of the unit consisting of mains switch, mains indicator, ampere meter, pid controller, pilot lamps (for cooling cycle-heating cycles), low water level controller fitted & connected through circuit to boiler heater low level pilot lamp (will not glow if water level is below requirements),   operating voltage: 230 volts single phase, 50hz, ac.

We offer humidity oven specification double walled construction with backside triple. 3 thick puf insulation ensures stable temperature with humidity & reduced energy consumption. motorized blower at back side of the chamber develops unique air flow system which ensures maximum uniform temperature & humidity condition inside the chamber.unique air flow assures quick recovery after door openings. 112 hp, tefc , f-class insulation, single phase, 1440 rpm, 230 volts high quality u shape s.s. Tubular heaters are used for better heating. steam injection system (non condensing type) & reservoir tank with water level arrangement with indicator.

We offer a quality-approved range of Humidity Ovens that comply to the set industry standards. These double walled ovens have proper locking arrangement for door. Moreover, these ovens are outfitted with a temperature control system to ensure effective mechanism. Besides, we offer these to the clients at market leading rates.

• CHAMBER SIZE: 18” x 18” x 28”
• CAPACITY: 150 Ltrs

Designed for testing product shelf – life, packing and electronic test.Specially designed to meet ICH, WHO & USFDA requirements.Double walled having Inner 304 SS chamber and Exterior finished in Powder Coated Shade in REGULAR MODEL.The Temp. & Humidity controlled by Microprocessor based PID Temp. & RH% Controller with Dual Digital Indicator & PT – 100 sensor for Temp. & capitence type sensor for RH%.Cooling Kit is CFC Free. The Cooling Kit includes hermetically sealed compressor, condenser, Fan Motor, etc. and are safety placed belowabove the chamber.