HVAC System Dealers in Sector 63, Noida

• Type: Two Way
• Material: Metal
• Color: Grey
• Size: Standard
• Shape: Rectangle
• Surface: Polished

hepa filters integrate excellent filtering efficiency, good mechanical durability and are capable of removing particulate matter with minimum collection efficiency of 98% for 0.3 micrometer diameter of a thermally generated dioctylphthalate particle. features ultra fine glass fiber media 0.2 – 0.3 micron filter capacity 99.997% filtration efficiency max. Temp. 230 deg. C. dop tested all filters are validated and shipped prior to dispatch with dq,iq,pq,oq as per gmp std application laminar flow benches food processing & pharmaceuticals industries. hospitals, nuclear power plant, electronic industry and likewise biochemical plant, oil & gas industries, pathology laboratory, blood bank.

In this write up, an energy-saving device is introduced into the air-handling unit (AHU). Due to increases in energy costs, energy saving devices or systems have become the new preferred trend in tropical countries. A primary cooling coil system is incorporated into the AHU to recycle the condensate water in order to achieve energy savings. The warm outside fresh air is drawn through the primary cooling coil to recover the latent heat of condensate water. The large temperature gradient between the warm fresh air and condensate water enlarges the amount of energy recovered. This system is well applicable to primary AHU which serves primary air to the air-conditioning system. The cost of installing the device is negligible but in returning long term saving. Furthermore, the de-cooled condensate water can be drained off through non-insulated drain pipe. The idea generation is discussed in the introduction. Chapters 2 and 3 describe the preliminary calculation of the energy saving percentage. Chapter 4 shows the detailed theoretical study of the development of the energy saving system. This shows the viability of the idea. Chapter 5 will recommend the design of the primary cooling coil configuration to achieve the desired cooling effect and energy saving strategy. Lastly, the conclusion of the whole study is presented.

• Application: Industrial Use
• Type: Hvac Duct
• Brand Name: Freshair Engineers
• Color: White
• Material: Stainless Steel
• Size: Customized

In this write up, an energy-saving device is introduced into the air-handling unit (AHU). Due to increases in energy costs, energy saving devices or systems have become the new preferred trend in tropical countries. A primary cooling coil system is incorporated into the AHU to recycle the condensate water in order to achieve energy savings. The warm outside fresh air is drawn through the primary cooling coil to recover the latent heat of condensate water. The large temperature gradient between the warm fresh air and condensate water enlarges the amount of energy recovered. This system is well applicable to primary AHU which serves primary air to the airconditioning system. The cost of installing the device is negligible but in returning long term saving. Furthermore, the de-cooled condensate water can be drained off through non-insulated drain pipe. The idea generation is discussed in the introduction. Chapters 2 and 3 describe the preliminary calculation of the energy saving percentage. Chapter 4 shows the detailed theoretical study of the development of the energy saving system. This shows the viability of the idea. Chapter 5 will recommend the design of the primary cooling coil configuration to achieve the desired cooling effect and energy saving strategy. Lastly, the conclusion of the whole study is presented.In tropical countries such as the United Arabia Emirates (UAE) and Malaysia, the climate is always hot and highly humid throughout the year. Lots of energy is consumed for Air-Conditioning and Mechanical Ventilation (ACMV) systems. For buildings such as hotels and hospitals, energy is used to cool down the fresh air in the primary AHU and pumped into the building to achieve the internal air quality required. Due to the high humid climate, lots of condensed water is drained away as a by-product. However, the cooled condensate water actually consumes 2% of the total cooling load of the system on average. Here, we are studying the recovery of the condensed water in which the 2% energy can be saved. 2% of energy for a system running 24 hours a day can make a significant reduction for the operating cost. The condensed water is first collected by the condensate drain pan below the main secondary cooling coil. Then, the collected condensed water is pumped into the primary cooling coil for the de-cooling process.In order to maximize the energy recovery, a primary cooling coil is recommended to be installed at the fresh air intake opening of the AHU where the temperature gradient between the air outside and condensate water is greater, rather than at the side in which air returns or at the mixing plenum.

HEPA Fan Filters :Designed to maximize contaminant reduction and operating efficiency, and minimize sound output, HEPA filters are a critical feature in larger cleanrooms with semi to full ceiling fan coverage. The type of HEPA filter to use is determined by the design approach of the cleanroom. Motorized HEPA filters are typically utilized in negative pressure plenum designs for dual-ducted designs. Non-motorized, ducted HEPA filters are utilized with a central air handler providing temperature and humidity control.HEPA Fan Filter : Air velocity of 90 fpm Air flow of 650 cfm 99.99% operating efficiency Removes micron particles 0.3 and larger RSR HEPA Fan Filter : Room Side Replaceable HEPA FilterULPA Fan Filter : Air velocity of 90 fpm Air flow of 650 cfm 99.999% operating efficiency Removes micron particles 0.12 and larger

SDTORK Flame Proof electric actuators are design to provide reliable and efficient operation of 90 degree quarter turn valves, dampers, etc.Actuator torques ranges from 80Nm to 3,000Nm, currently ten models are available: Compact type actuator, SD-HQ006, is also available separately.

The Double Skin Modular Air Handling Unit is designed based on modular paneling concept to fulfill the indoor air quality requirement. The air flow of DM AHU is within range of 330 to 20,000 lps (700 to 42379CFM) and up to a total static pressure of 1991 pa (8” W.G). For special design, the air flow can be reached25,000 lps (52974 CFM).The AHU is constructed of high strength extruded Aluminium to form rigid frame. Besides, it is with thermal barrier feature which using three leg-fiber plastic corner pieces, 25 or 50 mm Polyurethane (PU)insulation panel and all frames are insulated with 3.0 mm PE foam to minimize energy heat loss and prevent condensation occurring. The external clip method to hold the double skin PU insulation panel is easily accessible for maintenance while being air tight. The new thermal- break profile can perform better than the original profile in terms of providing better insulation and energy saving.There is selection software programme available: DM AHU, to optimize the best arrangement and performance for either chilled water system or DX system. Standard components can be selected and be placed according to customer requirement. Once the unit is defined, optional item and accessories are identified. The programme gives immediate feedback if there is no suitable choice for the units. The programme provides us with fan curves data, coil performance data, dimension, and shipment weight. McQuay can produce high quality, flexibility air handling unit which can provide excellent thermal efficiencies and to be airtight. Besides, air handling unit produced is with flexibility features to meet the indoor air quality, operating efficiency, sound level and installation requirement for today’s extensive   SALIENT FEATURES Application :Cooling, Heating, Dehumidification, Humidification in shopping malls, offices, restaurants, health care, multiplex, clean rooms and all type of industrial application Wide capacity range :2040 CMH to 59500 CMH Comfort to Industrial :pressure range from 250 Pa to 1500 Pa Product Range for all Application :   1. Horizontal Floor Mounted These units are suitable for large air quantity. The modular design allow flexible combination of component to suit specific application. hese AHU’s are ideal for large commercial / office / industrial / hospitality / healthcare application. 2. Unitary Vertical Floor Mounted These units are preferred when floor space is at a premium. Vertical units are units designed with filter coil & fan all arranged in a vertical frame. The advantage of these units are they occupy less floor space. Floor Plates where low ceiling height is a constraint multiple vertical units can be used to advantage. Where no AHU rooms are provided exposed units with supply air plenum can be used. 3. Ceiling Suspended Hide These units are suspended from ceiling slab above false ceiling and thus require no floor space & AHU rooms. These units are

Collar Damper

Terminal Filter Box, Micron filter bag, Filter Bags, well screens

aluminum extruded diffusers, grills, Industrial Dampers, Air Filters

Gi Ducting, Industrial Trolleys, PVC Coated Fabrics, painting boot

Spot Diffusers, Air Washers, industrial air washers, Cellulose Pad

Air Handling Units, AXIAL FAN, Cabinet Fans, inline fan, jet fan, Scrubbers