Xenon Weather Meter GX75
High performance - 7.5kW Water-Cooled, Xenon. Irradiance and temperature direct control on specimen. This conforms to ISO, IEC, SAE, ASTM, AATCC, JIS and JASO standards etc. This is capable of super-accelerated tests with irradiance three times higher than that of solar ultraviolet (180Wm2), and meeting the expectation of today's high-speed product development. This conforms to ISO, IEC, SAE, ASTM, AATCC, JIS and JASO standards etc.
...moreX-600 fluxers
The Katanax® X-600 fluxer is the next generation in electric fusion, offering new enhanced features for unparalleled results. Our fluxers combine exceptional fusion accuracy with all the advantages of electric power combined with speed, simplicity and a robust design for the experienced or novice user..
...moreX-300 fluxer
The Katanax® X-300 fluxer is a key part of our new offering in next-generation electric fusion, providing exceptional flexibility for outstanding ease of use and unparalled results. This multi-sample fluxer is available in 1, 2 or 3 positions, and can later be expanded, thus adapting to the needs of today's modern laboratories. Here is what customer Owens Corning had to say about its pre-release trial:. "The X-300's robust design will be better suited for use in a plant environment. Since the X-300 is able to operate even if an element fails, this will limit down-time which is critical for meeting the needs of manufacturing. Since the crucible and mold holders are made of a high temperature alloy, any spills can be dissolved from components and should not need to be replaced. The software now includes up to 6 fusion steps and operates in a similar manner to the K1 and K2 Prime, so transitioning would be seamless."
...moreWeather Meter
Xenon Weather Meter GX75 (7.5kW) High performance - 7.5kW Water-Cooled, Xenon. Irradiance and temperature direct control on specimen. This conforms to ISO, IEC, SAE, ASTM, AATCC, JIS and JASO standards etc.
...moreW130i Dynamic Light Scattering System
Avid Nano’s W130i is a high sensitivity dynamic light scattering system for size and molecular weight measurement of proteins, bio-molecules and sub-micron particles. The W130i combines unbeatable measurement performance with an economical benchtop footprint, rugged durability and supreme user convenience. It’s extraordinarily compact dimensions are the result of miniaturized ‘diamond geometry’ S.A.B.Re fibre optic technology.
...moreupright metallurgical microscopes
Olympus BX Series Upright Metallurgical Microscopes meet wide-variety of analysis applications, from a routine inspection to sophisticated analysis study, by the wide range of microscope models strengthened by superb optical performance and variety of accessories.
...moreUltrascan VIS
UltraScan VIS is a visible-range high-performance color measurement spectrophotometer that measures the full range of human color perception. It can be used in production and in the laboratory for inspecting raw materials, evaluating finished product or developing methods for color analysis.
...moreUltraScan PRO
The UltraScan PRO is designed to be your reference instrument for measuring both reflected and transmitted color. It meets CIE, ASTM and USP guidelines for accurate color measurement. The instrument's 5 nm optical resolution enables it to precisely measure colors using colorants with sharp cutoff characteristics.The D65 illumination source is calibrated in the ultraviolet region for the accurate measurement of whitening agents. UltraScan PRO has an extended wavelength range into the near infrared and near ultraviolet that permits the measurement of camouflage materials and UV blockers. The system uses diffuse8° geometry with automated specular component inclusionexclusion. It also features three sizes of sample measurement areas with automated lens change. The UltraScan PRO includes EasyMatch QC software and an electronic record keeping version that is 21 CFR 11 compliant is available.
...moreUltima IV X-ray diffraction systems
The Ultima IV represents the state-of-the-art in multipurpose X-ray diffraction (XRD) systems. Incorporating Rigaku's patented cross beam optics (CBO) technology for permanently mounted, permanently aligned and user-selectable parallel and focusing geometries, the Ultima IV X-ray diffractometer can perform many different measurements...fast.
...moreTTRAX III diffractometer
The TTRAX III is the world’s most powerful diffractometer. Utilizing an 18 kW rotating anode X-ray source in a θθ geometry provides the perfect system for demanding applications. Both thin film diffraction and the determination of trace phases in powdered samples benefit greatly from the TTRAX’s high powered source.
...moreTOC Analysers
Total Organic Carbon Analyzers OI Analytical has been a leader in designing and manufacturing TOC Analyzers since 1970.
...moreTMA humidity generator
The compact humidity generator is connected to the TMA for measurements under water vapor atmosphere with a constant relative humidity. This system is for water vapor generation at ambient or above ambient temperatures. It adopts the polymer type humidity sensor and high precision temperature sensor, its response to various water vapor concentrations is quick and stability for longer measurement is realized. The setting of the relative humidity is achieved by the PC station and synchronizes with the temperature program. For standard furnace, it can measure from dry to 90%RH at ambient temperature; and from dry to 90%RH using the specialized furnace at ambient to 60°C through the circulator temperature control.
...moreTG-DTA humidity generator
The compact humidity generator is connected to the TG-DTA for measurements under water vapor atmosphere with a constant relative humidity. Equipped with a polymer type humidity sensor and high precision temperature sensor, its response to various water vapor concentrations is quick and stability for longer measurement is realized. It enables the user to perform heating under a constant relative humidity. For standard furnace, it can measure from dry to 90%RH at ambient temperature; and from dry to 90%RH using the specialized furnace at ambient to 60°C through the circulator temperature control.
...moreTG-DTA Thermal Analysis
Simultaneous Thermal Analysis (STA) generally refers to the simultaneous application of thermogravimetry (TG) and differential thermal analysis (DTA) to one and the same sample in a single instrument. The measurement conditions are perfectly identical for the TG and DTA signals (same atmosphere, gas flow rate, vapor pressure of the sample, heating rate, thermal contact to the sample crucible and sensor, radiation effect, etc.). Rigaku adopts the horizontal differential triple-coil balance system which is the mainstream mechanism because the thermal drift which apparent mass change with increasing temperature becomes negligibly small.
...moreThermodilatometry
Thermodilatometry (TDL) is a thermal analysis technique in which a constant load is applied to a sample, and the amount of expansion andor shrinkage of the sample is measured during heating.TDL8411 adopts Rigaku's established reputation on differential expansion principle where the thermal expansion or shrinkage generated from the detection mechanism itself can be cancelled. It offers high accuracy and excellent reproducibility in expansion and shrinkage measurements, even with low expansion materials and samples with low-thickness.
...moreSZX16 microscope
The versatile SZX16 microscope is designed for very demanding applications with the ability to resolve 900 line pairmm. Utilization of the full zoom range (0.7x - 11.5x) can be accomplished with our dual turret.
...moreSTM7 microscopes
The STM7 microscopes offer excellent versatility and high performance three axis measurements of parts and electrical components, with sub-micron precision. Whether samples are small or large, simple or complex, or measurements are being taken by a novice or an expert, the Olympus STM7 range features measuring microscopes tailored to fit your needs.
...moreSpectraTrend HT spectrophotometer
HunterLab's next generation SpectraTrend HT spectrophotometer takes color quality control to its highest level with 030 design for the ultimate in color measurement precision. Combining versatility, simplicity and performance, the SpectraTrend HT reflects almost 60 years of color measurement innovation in one easy-to-use, compact continuous online non-contact color and height measurement.
...moreSmartSite RS portable stress analyzer
The SmartSite RS is the world’s smallest portable stress analyzer that is especially designed for field analysis. It enables to characterize residual stress of metal parts ranging from large construction projects to individual products, e.g. bridges, maritime vessels, aircraft, aerospace equipment, pipelines, heavy machinery and automobiles.
...moreSmartLab 3 multipurpose X-ray diffractometer
The SmartLab 3 is a highly versatile multipurpose X-ray diffractometer with built-in intelligent guidance. It offers continued refinement of the original ease of use features that enabled the original SmartLab to receive the R&D 100 Award in 2006: automatic alignment, component recognition, cross beam optics and a five axis goniometer.
...moreSmartLab diffractometer
The SmartLab is the most novel high-resolution diffractometer available today. Perhaps its most novel feature is the SmartLab Guidance software, which provides the user with an intelligent interface that guides you through the intricacies of each experiment. It is like having an expert standing by your side.The system incorporates a high resolution θθ closed loop goniometer drive system, cross beam optics (CBO), an in-plane scattering arm, and an optional 9.0 kW rotating anode generator.
...moreSatmagan 135
For over 40 years mining industry around the world has used Satmagan for analyzing mixtures of magnetic and non-magnetic components. Accurate analysis of ferro-magnetic compounds of iron such as magnetite is extremely difficult and time consuming by conventional chemical methods. Satmagan, on the contrary, is an easy and fast method of measuring the magnetic material content of the sample. The measuring time of the Satmagan 135 is only one minute with an accuracy of within 0.4%. Satmagan 135 is an ideal tool for optimizing the return of investment in your mining and other industrial operations.
...moreS-MAX3000 pinhole SAXS camera
The S-MAX3000 pinhole SAXS camera design is available with a choice of conventional or high brilliance X-ray sources. A 3-meter, fully evacuated camera length provides both high intensity and high resolution. Coupled with a fully integrated 2-dimensional multi-wire proportional counter, the system is capable of making highly sensitive measurements from both isotropic and anisotropic materials. A wide range of sample stage attachments provide maximum flexibility in controlling environmental sample conditions during measurement.
...moreRAPID II micro-diffraction XRD system
DMAX RAPID II is arguably the most versatile micro-diffraction XRD system in the history of materials analysis. In production for well over a decade and continuously improved during that time period, the success of the DMAX RAPID II is a testament to the suitability of imaging plate technology for measuring diffraction patterns and diffuse scattering from a wide range of materials.
...moreSTM7-BSW measurement support software
STM7-BSW is a measurement support software for measuring microscopes.Not only is a live image acquired by digital camera and displayed on a monitor, but also observation, measurements and report creation are possible on the same screen.Therefore, the STM7-BSW improves your work efficiency.
...moreHKL-3000R data collection software
HKL-3000R represents a new approach in crystallographic data collection software that integrates data collection, data reduction, phasing and model building into a single package. This approach significantly accelerates the process of structure determination and on average minimizes the number of crystals, data sets and time required for structure solution.
...moreBe first to Rate
Rate This