Ice Plant Trainer Dealers

We have vast experience of 15 years to Design & Manufacture all the Educational Products in Mechanical Refrigeration. Over this period, our products have received wide spread acceptance in the market, owing to their high reliability, ruggedness, performance & quality. We assure consistent results throughout it’s lifecycle. We uniquely use environment friendly non ODS refrigerants approved under MONTREAL PROTOCOL.

he unit enables the students to study the Basic Principals of ice plant cycle within a short period

Product Code: EKE 2402The Plant uses ice can system. The cans filled with fresh wafer are kept in a tank in which brine is circulated. The brine is cooled by the refrigerant, which in turn cools the water in can and ice formation takes place.Specifications: Compressor : Kirioskar make hermetically sealed compressor using R 12 Refrigerant. Condenser : 4 row type air cooled. Expansion Valve : 0.5 TR capacity. Evaporator : 1/2" O.D. copper tube - 75 feet long. Filter – Drier : Silica gel filled - 3/8" flare connections. Main Tank : 600 mm X 375 mm Total Ice Cane Capacity : 7 Kg Ice Making Capacity : 7 Kg / 4 Hours. Thermocol insulation : 6.5" Brine Stirrer : Motor driven fan, 1 phase, 1/10 HP, 1440. Instrumentation: Temperature Indicator : Digital Type O300°c, with 1 °c least count, using Cr/Al thermocouples. Accuracy 1 % of full reading. Compressor Energy Meter : Single Phase, 10 - 20 Amp. Capacity. Pressure Gauge: 0-21 Kg/cm2 -1 to 10.6 Kg/cm2 Both of 65 mm dial. Digital Thermometer Controls : HP/LP Cutout : Auto reset type. Thermostat : Auto reset type. A technical manual accompanies the unit.Services Required: Floor Area - 2m. X 1.5m. X 1.5m. Height. 220 V., 15 Amp.Single Phase Stabilized power supply  

The Plant uses ice can system. The cans filled with fresh wafer are kept in a tank in which brine is circulated. The brine is cooled by the refrigerant, which in turn cools the water in can and ice formation takes place. SPECIFICATIONS: 1.Compressor : Kirioskar make hermetically sealed compressor using R 12 Refrigerant. 2.Condenser : 4 row type air cooled. 3.Expansion Valve : 0.5 TR capacity. 4.Evaporator : 1/2" O.D. copper tube - 75 feet long. 5.Filter – Drier : Silica gel filled - 3/8" flare connections. 6.Main Tank : 600 mm X 375 mm 7.Total Ice Cane Capacity : 7 Kg 8.Ice Making Capacity : 7 Kg / 4 Hours. 9.Thermocol insulation : 6.5" 10.Brine Stirrer : Motor driven fan, 1 phase, 1/10 HP, 1440.   INSTRUMENTATION: 1.Temperature Indicator : Digital Type O300°c, with 1 °c least count, using Cr/Al thermocouples.                                                                                                                                  Accuracy 1 % of full reading.                                                                                                                                2.Compressor Energy Meter : Single Phase, 10 - 20 Amp. Capacity.  3.Pressure Gauge:  a) 0-21 Kg/cm2   b) -1 to 10.6 Kg/cm2   c) Both of 65 mm dial. 4.Digital Thermometer CONTROLS: 1.HP/LP Cutout : Auto reset type.    2.Thermostat : Auto reset type. A technical manual accompanies the unit. SERVICES REQUIRED: 1.Floor Area - 2m. X 1.5m. X 1.5m. Height. 2.220 V., 15 Amp.Single Phase Stabilized power supply

• capacity: 6 Kg in 4 hours

The ‘Swarg Systems & Instruments’ unit enables the students to study the ice plant cycle within a short period. The trainer consists of a hermetically sealed compressor & the cooling circuit. Ice cans are kept in brine, which is cooled by the refrigerant evaporator. A brine agitator circulates brine over the evaporator and ice cans. The unit is provided with finned tube air cooled condenser. As conventional ice plants take 12-24 hours to complete the cycle, this ice plant is specially designed to demonstrate all the processes of ice formation like bubbles, flakes formation to be complete within one experimental period of 4 hours and hence it is most suitable for laboratory use. It also demonstrates the effect of size of ice can over the time for ice formation.

The unit enables the students to study the Basic Principals of ice plant cycle within a short period. The test rig is designed for the study of thermodynamics of vapour Compression refrigeration cycle by way of demonstration and experimentation. It has a facility to measure various parameters for experimentation. Ice cans are kept in liquid tank, which is cooled by the refrigerant evaporator. As conventional ice plants take 12-24 hours to complete the cycle, this ice plant is specially designed to demonstrate process of ice formation to be complete within period of 4 hours and hence it is most suitable for laboratory us

• Condenser:: Air cooled
• Brine Tank:: Made of S. S.
• Ice Cans:: Made of G. I. Sheet

Kotech Export offers Ice Plant Trainer which runs on ice can system. It is manufactured by using finest quality raw materials and cutting-edge technology in which the cans are filled with water and are immersed in tank in which brine solution is circulated. The brine is cooled by the refrigerant, which in turn cools the water in can and turns it into ice. These ice plant test rigs are provided with features like sturdy construction, hassle-free operation and cost-effectiveness. In domestic market, we are the leading Ice Plant Trainer Suppliers in Odisha, Jharkhand, Kerela, Karnataka & North-East India.

• Model: SML0013

The ice plant trainer runs on ice can system. In this system, the cans are filled with water and are immersed in tank in which brine solution is circulated. The brine is cooled by the refrigerant, which in turn cools the water in can and turns it into ice.

• used : To calculate the co-efficient of performance of unit,To determine the refrigerating capacity and tonnage of unit,ICE making capacity of unit

• Refrigeration and air conditioning lab: Lab Water To Water Heat Pump
• Refrigeration and air conditioning lab: Ice Plant Test Rig

Product description:owing to our rich industry experience and the assistance of our vendors, we have been able to manufacture best quality ice plant trainer and offer it at an affordable market price. Manufactured using finest quality raw materials and cutting-edge technology, this equipment undergoes several quality checks before its final dispatch. Due to its sturdy construction, hassle-free operation and cost-effectiveness, this equipment is widely demanded around the globe.

• Voltmeter: 0 - 250 V
• Ammeter: 0 - 15 A
• DIMENSIONS (Nominal): 2 m. (L) x 1.5 m. (W). x 1.0 m (D)

Used study the basics of ice plant and components used in ice plant refrigeration system. Understand the principles of refrigeration cycle and vapour compression refrigeration cycle.IEICOS ICE PLANT TRAINER TEST RIG is designed with standard industry state-of-the-art components to help the students knowledge about currently available products and components. The system is self contained with a full fledged easy access control panel with various meters, displays, switches and indicators. The system consists of:

So far the conventional procedure to have ice plant trial was to use a conventional ice plant, which took 12 to 24 hours completion of trial, which was very inconvenient as far as a students practical period was considered. Considering this difficulty we have developed a unit which can demonstrate all the possesses of ice formation within 4 hours. It demonstrate all the process of ice formation including flakes formation, dependence of can width upon time of ice formation all within 4 hours. Also, it is a small unit, occupying small space & being trolley mounted, can be located anywhere. Both inner & outer tanks are stainless steel, give very longlife. Thus it gives a compact, long life unit with a practical completion period of only 4 hours, and presents a good quality low cost unit.

• Condenser: 4 row type air cooled
• Expansion Valve: 0.5 TR capacity.

The Plant uses ice can system. The cans filled with fresh wafer are kept in a tank in which brine is circulated. The brine is cooled by the refrigerant, which in turn cools the water in can and ice formation takes place.

We are offering ice plant trainer ice plant trainer : the plant uses ice can system. The cans filled with fresh wafer are kept in a tank in which brine is circulated. The brine is cooled by the refrigerant, which in turn cools the water in can and ice formation takes place. specifications: compressor : kirioskar make hermetically sealed compressor using r 12 refrigerant. Condenser : 4 row type air cooled. Expansion valve : 0.5 tr capacity. Evaporator : 12" o.d. Copper tube - 75 feet long. Filter – drier : silica gel filled - 38" flare connections. Main tank : 600 mm x 375 mm total ice cane capacity : 7 kg ice making capacity : 7 kg 4 hours. Thermocol insulation : 6.5" brine stirrer : motor driven fan, 1 phase, 110 hp, 1440. instrumentation: temperature indicator : digital type o300°c, with 1 °c least count, using cral thermocouples. Accuracy 1 % of full reading. Compressor energy meter : single phase, 10 - 20 amp. Capacity. Pressure gauge: v 0-21 kgcm2 v -1 to 10.6 kgcm2 v both of 65 mm dial. Digital thermometer controls : hplp cutout : auto reset type. Thermostat : auto reset type. a technical manual accompanies the unit. services required: floor area - 2m. X 1.5m. X 1.5m. Height. 220 v., 15 amp.single phase stabilized power supply

Ice plant trainer , We also manufacture the equipments and control systems for sugar industries mainly mill automation, boiler instrumentation, prd stations and embibition water control system.

Code: EEZ0012 Ice Plant Trainer. Ice Plant Trainer ManufacturerCoach is designed with easy and practical ideas to visualise the principle components of ICE PLANT. The overall set-up is housed in smartly-designed inflexible construction.Experiments:    To calculate ICE PLANT capability    To calculate COPUtilities Required    Stabilized energy provide 15 Amp 220 V AC Water Provide & Drain

Ice Plant Trainer, Abney Level, Brass Bullion Weight

Ice Plant Trainer, Sampling Tray, digital measuring instrument

Ice Plant Trainer, Epicyclic Gear Train Apparatus, Journal Bearing Apparatus

Ice Plant Trainer, GE -86 Deluxe Film Slide Projector

Ice Plant Trainer, Reynolds Apparatus, Pipe Friction Apparatus

Ice Plant Trainer, Beam Apparatus, UNSTEADY STATE HEAT TRANSFER UNIT

Ice Plant Trainer, Notch Apparatus, subsonic wind tunnel

Ice Plant Trainer, Absorption Analyzers, Model Sedimentation Tank

Ice Plant Trainer, video production equipment

Ice Plant Trainer, Sodium Vapor Lamp Transformer, POWER ELECTRONICS TRAINER

Ice Plant Trainer, Bearing Analyzer Machine

Ice Plant Trainer, Vibration Monitoring, Micro Mill

Ice Plant Trainer, Hand Held Crop Sensor, Digital Wind Speed Sensor