Industrial Furnace Dealers in Sector 63, Noida

The Model VAF Furnace System is designed by RCH Associates to perform annealing, alloying or sintering of substrate films that are sensitive to residual oxidation such as refractory and composite metals. The system includes a moving element that traveses the outside of the main vacuum process chamber. The components of the processing system generally include: Main quartz process tube with vacuum flange at the load port. The flange includes a line that is connected to a vacuum pump and a gas injection port. An inert, noble or forming gas delivery system. A fast response element that is mounted to a guide track, liner bearing system that is motor driven. An array of fans to cool the outer wall of the main chamber tube. A pumping system that includes 2 isolation valves. One valve is used to isolate the chamber from the vacuum pump to allow high flows of purge gas during cooling. The second valve allows the vacuum pump to evacuate the chamber.       The process steps for a typical vacuum annealing process are: With the element retracted from covering the main chamber, the substrates are then inserted. This allows the substrates to be loaded at room ambient temperature. The main chamber is sealed and vacuum is drawn to evacuate all residual oxygen from the process environment and to outgas any residuals. The element, which is preheated, then traveses to cover the main chamber and raise the temperature of the substrates to annealing targets. Substrates remain at-temperature for the designated time. After timed-annealing, the element traverses to uncover the main chamber. When the element is retracting, the fans are turned on to air-cool the outer wall of the chamber tube. Simultaneoulsy, a high volume of gas is delivered to the inside of the chamber to cool the substrates. The combination of these methods rapidly returns the substrates to room ambient temperature. The substrates are then retracted from the main chamber.

• Color: RED
• Fuel Type: LPG/PNG
• Size: 60-318 KW
• Volume: 0.15 m3
• Motor: 230/50-60/250 V/Hz/W
• Control unit: Siemens
• Max inlet pessure: 360 mbar
• Fittings: Dungs Gas MultiBloc
• Flame monitoring: Ionisation
• Gross weight: 29 kg
• Features: High performance, Reliability, Durability

Lead to be manufactured from Rotary Furnace can be obtained directly from scrapped batteries or as slag from Mini Blast Furnaces In case of former batteries are cut open or broken to segregate lead scrap, plastic and other materials from them;lead scrap in the form of lead powder/ plates etc. is charged in the furnace along with a proportionate charge of additives. InThe case of latter, slag produced from Mini Blast Furnaces is charged into the Rotary Furnace, again with proportionate additives.This process is a batch type process. After filling the required quantity of raw material (either manually or mechanically), thelid of the furnace at the front is closed. The burner attached to the moving door is then fired. The Rotary Melting Furnace is very flexible and universal equipment used for recycling many non-ferrous metals. It is themajor lead production technology used in India and many other countries for Secondary Lead Production. A lead production system based on this technology has certain distinct characteristics such as: Equipment scalable for installing higher capacities Recovers all lead in one production cycle Plates & powder from scrap battery as well as slag from Mini Blast Furnace can be used as raw material Requires addition of certain consumables Can be fired with various fuels Generates high Pollution both as Flue Gases & Fugitive Emissions Apart from plates and paste of lead oxide from scrap batteries, slag from Mini Blast Furnace is charged in the Rotary Furnace.In addition to these, certain compounds of sulphur are also present in the batteries. When this material is heated in thePresence of carbon, lead oxide is converted to lead. This conversion along with burning of fuel generates flue gases and fumescontaining dust, dirt, oxides of lead, lead particles and such other impurities etc.Hence, to meet various goals of maintaining employees' health and factory environments as well as regulatory requirements,it becomes imperative to get high end Air Pollution Control Systems to be installed with the Rotary Furnaces.

Designed with perfection, the new series of our high temperature ovens is named ‘Ghibli’.   To take care of your distinctive needs, the series offers: Models ranging from 58 litres to 3000 litres Option to go for any of the two control systems viz. manual and programmable