Marine Navaids and Solar Auto Pvt. Ltd. Ecotech I Extension, Noida, Uttar Pradesh

Type : Wireless, Wired

Country of Origin : Made in India

Weight : 9 kgs

Weight : 5 kgs

FEATURES: , The PLC-12 Programmable LED controller is a microcontroller based unit, incorporating all the control/ indication functions required to operate LED lanterns. The PLC-12 PCB is contained in our standard 110 mm dia. enclosure for maximum environmental protection. CURRENT REGULATION: High efficiency Pulse-Width Modulation for variable input voltage has been employed to stabilize the LED current which is set in the factory as per LED load requirement. CHARACTER PROGRAMMING:256 characters as per IALA have been programmed in the PLC-12 programmable LED controller. Two small selector switches each 16-way giving 16 x 16 = 256 character are programmed. Any of the characters can be selected at site with the selector switches provided. LED CONTROLLER:The light is automatically switched ON at dusk and OFF at dawn. SOLAR CHARGE CONTROLLER:The PLC-12 LED controller incorporates a temperature compensated solar charge regulator to optimize the charging of the battery and prevent its overcharging and disables load at low voltage. Solar voltage upper limit setting for charging Battery:- For 12V system : 13.5V to 14.5V in 0.1V increment. (Solar panel input disables above 14.5V) Load disabled setting from Battery. For 12V system : 10.5V to 11.5V in 0.1V increment. (reconnects at 12V) SYCHRONISATION FACILITY:The PLC-12 LED controller has provision for synchronising, multiple units to flash the lights in unison through GPS system. MONITORING FACILITY:The PLC-12 LED controller has provision for working with our marine Remote Monitoring unit. MRM-100 to monitor all the functions of the Buoy and navigational light and sending the information to one or many designated mobile Phones with GPS and GSM network.  

Body material: Rotationally moulded, UV Stabilised vergin polyethylene seamless body Colour: Premixed with body material before moulding, Colour as per IALA Foam: Body fitted with closed cell P.U. foam. Day Mark: P.E. Cylindrical. Mooring Eye: 1 No. Steel (Joined internally) Lifting : 2 Nos. Steel (Joined internally)

FOR BUOYS AND SHORE BEACONS: We have developed a versatile remote monitoring system for Buoys and beacons by using the GPS and GSM cellular telephone network. The system is suitable for monitoring off-shore and on-shore stations, 24 hours a day from the designated mobile telephones. The outstation is fitted with GPS receiver and 900/ 1800 MHZ band GSM cellular radio unit that interfaces with the microprocessor running software. Each station is associated with its own telephone number stored on a SIM card. At the receiver station one or more designated mobile telephones can be activated. The Location of the light must be within GSM coverage area and the SIM card for Each station to be provided by the purchaser. The system carries following function. Monitoring of LED Lights: , During night conditions the navigation Light is constantly monitored by measurement of the LED Current. If the LED Current is not detected or remains consistently below a set level, a “Light fail” message will be sent to all the designated mobile telephones. Monitoring of Battery Voltage: The system regularly measures the battery voltage and a Low Battery text message will be sent to the designated mobile telephones if the average voltage falls to below 11 volts. When the battery voltage rises to 12.5V, the alarm condition will be cleared. Monitoring of Buoy position:The position of the buoy is constantly monitored by a 12 channel GPS receiver. If the buoy moves beyond an allowed limit, an OFF STATION text message will be sent to the designated mobile telephones. The message will also keep giving the new Latitude and Longitude position of the drifted buoy. The Position Monitor includes a delay off approximately 15 Minutes. Monitoring of GPS:The output of the GPS receiver is constantly monitored. If the receiver fails, a GPS FAILED text message will be sent to the designated mobile telephones. It is possible to reset the GPS receiver by sending a GPS=Reset command text message. The buoy will respond with a GPS Reset text message. Synchronising of Buoys and Shore Lights: The navigation Light characters are synchronised by timing signals extracted from the output of the GPS receiver. If the GPS receiver signal fails, the light will continue to operate but will not be synchronised. Also GPS fail signal will be sent to the designated mobile telephones. Status Report via Command Message:The status of the buoy lights and shore lights can be verified by sending a REPORT text message any time. When the command message sent during daylight the light will be energized for a second. If the light did not switch on, the reply will show “Light fail”

Light Source : High intensity LEDs. (with secondary lenses)

Brand Name : Marine LED Beacon