Multiple Effect Evaporator Dealers

• Material: Stainless Steel
• Country of Origin: India

Product Description: Owing to our expertise in this domain, we are offering superior quality Multiple Effect Evaporators. The offered protein recovery evaporator is widely used for fish meal industry for high salt water, high organic load waste water evaporation purpose. Designed with waste heat source, such as drier hot air, process waste steam, etc. In Multiple effect evaporator the set industrial norms, our offered range comes in various meet with lpg firing system, steam, hot air, etc. which clients can choose from as per their requirement. We can also customize this range as per the details provided by the clients.   How it Works : Water is boiled in a sequence of vessels, each held at a lower pressure than the last due to which the boiling point of water decreases as pressure decreases. The vapor boiled off in one vessel can be used to heat the next, and only the first vessel (at the highest pressure) requires an external source of heat. MEE available in 30 kld to 200 kld used for various industries

• Phase: Three Phase
• Material: Stainless Steel
• Frequency: 50 Hz
• Capacity: 5-500klpd
• Treatment Stages: 1-5 Stage
• Automation Grade: Automatic
• Driven Type: Axial Flow Pumps
• Usage/Application: Effluent Treatment

A Multi Effect Evaporator, as defined in chemical engineering, is an apparatus for efficiently using the heat from steam to evaporate water. In a multiple-effect evaporator, water is boiled in a sequence of vessels, each held at a lower pressure than the last. Because the boiling temperature of water decreases as pressure decreases, the vapor boiled off in one vessel can be used to heat the next, and only the first vessel (at the highest pressure) requires an external source of heat. While in theory, evaporators may be built with an arbitrarily large number of stages, evaporators with more than four stages are rarely practical except in systems where the liquor is the desired product such as in chemical recovery systems where up to seven effects are used.

• Material: MS Sheet
• Voltage: 220 V also in 380 V
• Automatic Grade: Automatic
• Power Source: Electric
• Usage/Application: Industrial
• Phase Type: Single

• Automatic Grade: Automatic
• Capacity: Custom
• Design: Standard, Customized

We offer a system comprising of Thermovapour re-compressor (TVR), Feed pre-heaters, Condensate flashing to reduce the steam consumption & thus achieving higher steam economy.Properly selected & designed scheme,adequate heat transfer area at best operating temperatures ensures the plant performance for longer time and reduces CIP frequency & plant stoppages.Easy & quick CIP facility for the plant, Fully automated and manual operation mode as per requirement, MOC as required. Complete turnkey plant package comprising of, Calendrias, Pre-heaters, Vapor-liquid, TVR, separators , Pumps, Hardware, Piping, Vacuum system Cabling , Instrumentation & Control Installation, Commissioning and Good after sales services.                                                                We offer all sizes and all type of evaporators namely, Falling film  Forced circulation,Scrapped surface Crystallize Evaporator in effective combination with Multiple effect evaporation system. Optimum number of effects in combination with falling film and forced circulation offered by us ensures least operating cost at the balance of capital cost. Salient feature of the System Offered by “CENTPRO” Offers various thermal methods for complete Zero Liquid Discharge Solution Selection of correct process scheme based on the type of effluent Every ZLD system is a unique designed and custom made to suit the effluent type Lower capital and operating costs Highly energy efficient Useable evaporative condensate generation from effluent Effective use of combination of Falling film & Forced circulation in multiple effect evaporator with Thermovapour recompressor (TVR), Feed preheating and Condensate flashing system to achieve highest steam economy. Removal of solvents from high COD stream using stripper column Dry powder / baggable solids are produced in uniquely designed dryer / ATFD plant Proper implementation of ML recycle system + Centrifuge for salt recovery Proper designed thus less cleaning frequency & Plant Stoppages Easy accessibility and less space requirement Minimum manpower required and user friendly plants Available in both fully automated and manual operation mode In house state of art manufacturing facility and quality control. All equipments are manufactured as per international codes and quality standards to meet specific needs

In order to recover the clean condensed water and enable its reuse from the RO rejects and ETP solution we offer Multi effect evaporators. The system is used to reduce the water loss through double or triple Effect Combination Evaporator with one falling film type and one forced circulation type evaporators. The material of construction for all liquid contact parts in SS304 and Calandria tubes of SS304. All vapor and condensate contact parts will be in M.S.Complete system will be under pressure at 3 kg/cm2( g).and consists of following components : Feed Pump : A centrifugal direct driven pump is used for transferring the feed solution from the balance tank to the Calandria. The pump is provided with a single mechanical seal and electrical motor. All contact parts with liquid will be in S.S.304. Calandria  : This Calandria is essentially a vertical shell and tube type vertical heat exchanger and is designed as per the Falling film /forced circulation principle. Steam is provided on the shell side and feed solutions is passed through tubes. The tubes of Calandria are of 25.4/ 31.75 mm OD. Adequate no. of tubes 4/6 M length are provided for the heat transfer duty.  The tubes are welded on the tube sheet.  The shell has nozzles for steam/vapor inlet and outlet, and temperature gauge. All Contact parts with liquid will be in S.S.304. Tubes will be of S.S.304. Thermic fluid/Steam and other non-contact parts will be in M.S. Vapor Separator : In vapor separator, the heated liquid coming from the Calandria is flashed. Saturated vapors coming out from top are sent to the next Calandria/condenser. Liquid concentrate coming out from bottom is withdrawn as feed to next Calandria/ as product. The separator shell has sight and light glass for viewing the concentrate level. Material of construction for all contact parts with liquid and vapor will be S.S.304 and non-contact parts will be in M.S. Re-circulation Pump : This pump is provided for re-circulation of slurry inside the heat exchanger, so as to increase the velocity of liquid inside the tubes and to get the required heat transfer. This is a Centrifugal Pump with double mechanical seal and motor. Contact parts will be in S.S.304. Concentrate outlet will be taken out from recirculation pump so the discharge head will be at around 5-6 meter only. Condenser is used to condense the evaporation rate at the outlet of system. It also consist of condensate pot, condensate pump and vacuum pump.

Fenix designs and manufactures efficient and elegant multiple effect evaporator (mee) at a low cost. Mee is an equipment system for efficiently using the heat from steam to evaporate water. In mee, liquor is boiled in a sequence of vessels, each held at a lower pressure than the previous vessel. Because the boiling point of water decreases with decreasing pressure, the vapour boiled off in one vessel can be used to heat the liquor in the next vessel and so on. Therefore only the first vessel at the highest pressure requires an external source of heat. In theory, evaporators may be built with very large number of stages. Evaporators with more than four stages are rarely practical except in systems where the liquor is the desired product. application: sodium hydroxide concentration of sugar solutions to very high solids content removal of water from soaps finishing concentration of some purees (apple, banana) removal of solvents from vegetable oils lignin solutions high concentration gelatin etc. warranty : process performance is guaranteed by us for 6 months post-commissioning.

In multiple-effect evaporators the heating medium in any subsequent effect is the vapor generated in the previous effect and thereby achieves a great steam economy. The purpose of TVR in a multiple effect evaporator is to compress the product vapor from an effect, to a higher temperature level by means of a steam ejector (TVR) to use it as the heating medium in that effect itself thereby reducing the prime steam consumption.

• Type: Forced circulation
• Material: SS 316, TI, SS 316L
• Brand: VG Engineers Pvt Ltd.

Multiple effect evaporator for effluent and RO reject. Zero discharge and ZLD plant.  

• Material: SS 304,316, Ti, MS
• Automatic Grade: Automatic, Semi-Automatic
• Features: Flexible operation, Less energy consumption, Simple operation,
• I deal in: New Only
• Separator: Yes
• Pressure: full vacuum

• Brand Name: Hitek
• Application: Concentration of sugar solution to extremley high solids content,sugar beet factories,pharmaceutical
• Condition: Good
• After-Sales Service Provided: Available
• Feature: Economized consumption of energy,Excellent evaporation from one effect to another,Suitable for viscous solutions Excellent heat transfer coefficient.
• Country of Origin: Mumbai

Multiple Effect Evaporator Multi-Effect Evaporation is an important procedure adopted to economize the consumption of energy. The Multi Effect Evaporators are designed to economize the consumption of energy. These are designed in such a way that the steam from an outside source is condensed in the heating element of first effect. Further for second effect the boiling temperature of first effect is just too high that evaporated water can serve as the heating medium. The formed vapors than send to condenser, if it is the double effect evaporator. But in the multi effect evaporators, the feed is generally transferred from the one effect to another, which leads to ultimate product concentration which further reaches to one effect of evaporator. Operation can be carried out backward feed or operation forward feed operation.Features : Economized consumption of energy Excellent evaporation from one effect to another  Suitable for viscous solutions Excellent heat transfer coefficient Applications : Concentration of sugar solutions to extremely high solids content  Removal of water from soaps Finishing concentrator on certain fruit purees Removal of solvents from vegetable oils Sugar beet factories Pharmaceutical industries 

We sternly keep a check on the designing and manufacturing of products and ensure that the material is strictly procured from the leading names only. The raw material is examined on the grounds of quality to deliver finest range of products. Owing to our timeliness and hassle free deliveries, we have become the primary choice of the buyers.