Navank Consultants Sector 125, Noida, Uttar Pradesh

High expansivity high tensile strength heat resistance chemical stability and no corrosively Water blocking yarn has the characteristics of quick water absorption, high expansivity, high tensile strength, no acid-basis, no consistency influence with cables, heat resistance, chemical stability and no corrosively etc. In the production of cables by using water blocking yarn, the materials of water blocking tape, polyester yarn and ointment could be omitted. Besides that, water blocking yarn is convenient in using, simple in techniques, stable in structure, reliable in water blocking, clean in environment, and no greasy pollution, especially, used in waterproof communication cable, dry-type cable, and insulation electronic cable, especially benthic cables.

Water blocking tape typically used in power, fibre and copper telecom cable to prevent longitudinal water penetration. ... Semi-conductive water blocking tape typically used under the metallic shield of power cables, where extra bedding performance is required. Water blocking tapes are available in non-conductive, semi-conductive and PET laminated versions to suite diverse cable application.

Interconnect ribbon is a hot dip tinned copper conductor installed in photovoltaic/solar panels. The interconnect ribbon is soldered directly onto silicon crystal to interconnect solar cells in a solar panel. The interconnect ribboncarries the current generated in solar cells to the PV bus bar.

Its a most common encapsulation is with cross linkable EVA with the help of lamination machine. The cells are laminated between the films of EVA in a vacuum which is under compression. With the EVA the solar cells are floating between the glass & back sheet helping to softens shock & vibration therefore, protecting the solar cell & circuits.  

Thickness : 0.45 to 0.50mm

A solar cell, or photovoltaic cell (previously termed "solar battery"[1]), is an electrical device that converts the energy of light directly into electricity by the photovoltaic effect, which is a physical and chemical phenomenon.[2]It is a form of photoelectric cell, defined as a device whose electrical characteristics, such as current, voltage, or resistance, vary when exposed to light.

Bus bar is a strip of platted copper that conducts electricity within a module, Panel, String Cells. The size of the bus bar determines the maximum amount of current that can be safely carried.

Width : 5.0 ± 0.2mm

Thickness : 0.3 ± 0.03mm( Basic Copper Thickness)

A wafer, also called a slice or substrate, is a thin slice of semiconductor material, such as a crystalline silicon, used in electronics for the fabrication of integrated circuits and in photovoltaics for conventional, wafer-based solar cells. The wafer serves as the substrate for microelectronic devices built in and over the wafer and undergoes many microfabrication process steps such as doping or ion implantation, etching, deposition of various materials, and photolithographic patterning. Finally the individual microcircuits are separated (dicing) and packaged. We are selling high grade, factory sealed silicon wafers since the 2006’s. Wafers are available from our stock in every diameter and grade, with an emphasis on 100mm, 200mm and 300mm Prime and Test device quality wafers. MG maintains a large inventory of Cz, FZ, low defect, ultra flat, and tightly controlled metals specifications etc. Because wafer specifications are unique to every semiconductor design, we offer the possibility to custom build to your requirements.

Bonding and Sealing. PV cells made from laminated glass or high performance plastics have to be bonded into aluminium housings before mounting into position. High grade industrial silicone adhesive is normally used to make a strong yet flexible bond between the two surfaces.

A laminated almunium-polyster-almunium tapes are fully bonded to the foam dielectric to provide 100% covarage, longitudinally applied over the polyethylenecore and the tape minimizes signal leakage.

Semi conductive screen material is divided into two categories: cross-linking semi-conductive shielding compounds and thermoplastic semi-conductive shielding compound. Mainly applied to shielding of medium & low voltage power cables, and production of semi-conductive shielding for 10KV aerial cables( Used with silane aerial materials). Processing temperature of the cress-linking semi =-conductive shielding compounds: 70-110ºC; Processing temperature of the thermoplastic semi-conductive shielding compounds: 90-140ºC.

Polythelene terepthalate(PET) used extensively in the production of a high-strength moisture-resistant and insulate film for cable core wrap, thickness from 12 micron to 125 micron, features option of spool packing.   HANDLING The skilled operator should take or lay the materials gently, carefully to avoid scrap and crash problems. STORAGE Keep the clean standard stock, away from light direct irradiation pollutionand all kinds of mechanical outside force.  

Muscovite Mica Backed Tape are produced from high temperature raw mica available in Indian mines thatcontains thermal properties to reach flame temperature of up to 1100°Celsius. Our product provides extreme reliability and durability when insulated to produce cable and wires. Additionally, the tapes have high flexibility along with superior tensile strength, which is suitable for high speed taping. Our muscovite mica tapes are produced using natural mica and is non-toxic, chemically neutral and 100% halogen free.

Apply for overall or individual twisted pair shield for electronic cable and local network cables protect from external electromagnetic interface LUBRITAPER provide the lubricating features to decrease friction of almunium or PET surface, TW spool is avialable.

A PV junction box is attached to the back of the solar panel (TPT) with silicon adhesive. It wires the (usually) 4 connectors together and is the output interface of the solar panel.

Application : For connecting PV modules & power evacuation.

Certification : TUV/ UL Approved

Base on the polyester or polypropylene film with the coating of coloring resin for the purpose of printing outer jacket, features option of spool packing.

The copolymer coated (ECCS) steel tape is made from high – quality cold rolled steel tape, and the copolymer film is made from EMMA material with excellent heat seal. The surface of tape is smooth , no wrinkle and pucker and oxidation spots, the winding is neat. The film is blue or nature color. It is applicable for manufacturing the copolymer coated steel tape used for shielding damp- proof and armor layer of communication of optical cable.

Length : 1030-5000m or your request

t is a outermost layer of the p.v module. Solar back sheet is a design to protect the inner component of the module. PV back sheet is a photovoltaic laminate that protects the PV module from UV, moisture and weather while acting as an electrical insulator. ITEM  Laminated Composite Back Sheet for Photo Voltaic Module 3 Layered Structure with Outerlayer fluro-Polymer, Middle Layer Pet And inner Layer of FluroPolymer / UV Resistant Polymer)

Country of Origin : India

Application : As Back Cover For Lamination of PV module Along With Eva

Aluminium frames provide stability without the weight of a material like steel, making it possible to positionsolar panels for optimal energy efficiency. SCOPE This specification covers the requirement of electrolytic ally formed anodic coating on aluminum & al alloy parts which are exposed to direct action of climatic elements. GENERAL   Aluminum parts to be anodized are made of Al alloy (63400/6063) as per IS- 733 & supplied in W P / t6 condition. End use of components is for solar photovoltaic module framing. Anodizing process as per type- I:IS -7088 Type of sealing as per IS-7088   VISUAL REQUIREMENT The anodic coating, shall be continues, smooth, adherent, uniform in appearance and shall be free from powdery areas, loose films, and discontinuities such as break, scratches and damages. DIMENTIONAL REQUIREMENT After anodic coating the parts shall comply with dimensional requirements of the applicable drawings.