Nuberg Engineering Ltd. Sector 64, Noida, Uttar Pradesh

The organization is supported by systematized packaging system which assists us in meeting the specific packaging requirements of the clients with ease. Also, we ensure zero damage to the products. Made using superior grade materials, our products are quality assured and as per international industry standards. Plant Capacity : Hydrogen Generator - 05-600NM3/Hr. Hydrogen Purification - 05-300NM3/Hr. Applications : Steel And Metal Processing Float Glass Edible Oils and Oleo Chemicals Power Consumption Electronics and Semi Conductors Meteorology Applications New Energy Sources, Solar Application

At the initial stages of sourcing raw material and other inputs, we sternly check for the quality used for the same. With the best range of raw material comes the best product. Thus, equal attention is given while sourcing inputs. Our team professionals ensure that smooth transactions are done and for that reason, we accept payments through letter of credit & money transfer. This makes us most reliable amidst the clients.Applications : Chemicals Oleochemicals Steel and Metal processing Power Generation   Nuberg offers Hydrogen plants based on natural gas reforming. We provide high purity hydrogen gas-upto 99.999%, to meet a variety of our client's industries and advance technology application.Steam Methane Reforming is an established and matured technology involving high levels of safety and automation. It is a low cost operation and offers a short paybck period. The off-gas from PSA can be used for burning thereby reducing fuel cost while decreasing waste gas ventilation volumes.

We sternly keep a check on the designing and manufacturing of products and ensure that the material is strictly procured from the leading names only. The raw material is examined on the grounds of quality to deliver finest range of products. We make sure that the products we offer to our clients will remain free from any kind of damage. Thus, we store the entire lot under secured environment in our capacious warehouse.Application : Pharmaceutical Industry Glass Industry Ampules & Vials manufacturing Lamps Industry T.V. Picture Tube Manufacturing Industry Steel Industry Brazing industry Water Treatment Chemical & Petrochemical

This is the first and basic model for producing nitrogen gas plants which requires only compressed air in order to produce nitrogen Gas at a desired flow, Nitrogen Produced by PSA method in he TWIN TOWER CMS FILLED.   It simply works on the process called “PRESSURE SWING ADSORPTION”.   Nuberg is India's leading manufacturer of Nugen PSA Nitrogen Gas generator under technical collaboration with M/s. Rutgers CarboTech GmbH. We have in house facility and expertise for manufacturing of various Pressure Vessels, Reactors, Adsorbers, Columns, Heat Exchangers, Tanks etc.Nuberg takes pride in providing quality equipments for Gas Generation, Gas Drying and Gas Purification systems. These equipments can be skid mounted and may be operated through PLC. We have numerous satisfied customers across the globe spreading over vide range of industry.

Buyers are free to place orders, safe and timely deliveries are guaranteed with us. In order to deliver a high quality lot of products, we make use of the best available resources and raw material. Also, we make sure that the material is sourced from the genuine vendors only.Application : Chemicals Oleochemicals Steel and Metal processing Power Generation   Nuberg offers Hydrogen plants based on methanol cracking. We provide high purity hydrogen gas-better than 99.999%, to meet a variety of our client's industries and advance technology application.Methanol cracking is an extremely useful technology being used to generate Hydrogen at low cost. The plant offers a short Payback period and is built with high safety features and automation. Methanol is considered as a preferred raw material in view of its easy availability and storage features.

We are manufacturers, Exporter and suppliers of Hydrogen Gas Purifier. We have in house facility and expertise for manufacturing of various Pressure Vessels, Reactors, Adsorbers, Columns, Heat Exchangers, Tanks etc.Nuberg takes pride in providing quality equipments for Gas Generation, Gas Drying and Gas Purification systems. These equipments can be skid mounted and may be operated through PLC. We have numerous satisfied customers across the globe spreading over wide range of industry.Product Specifications Hydrogen : 99.5% Nitrogen : Upto 0.5% Oxygen : Nil Dew Point : (-) 70°C Pressure : 3.5 to 25 Bar Plant Capacity : 1- 500 Nm³/Hr. Applications Heat Treatment Edible Oil Industry Chemical & Petrochemical Industry Chemical Process Industry This is ammonia cracker based hydrogen gas generator. Cracked ammonia is passed through special grade of desiccant in twin tower system ( PSA Type ) having properties of adsorption of Nitrogen molecules at faster rate than hydrogen molecules.

The heatless type dryer is designed to take advantage of the natural tendency to dessicant to established equilibrium with their surrounding and can deliver super dry compessed air. these type of dryers are the most economical and dew poins upto (-)40 °c are easily achieved. such dryers are mostly preffered for flow upto 500 cfm.Features: Excellent functionality High efficiency Superior performance Robust construction Specifications: Capacity: 20 CFM to 500 CFM Dew Point: -40 to -60 deg C ADP Purge Loss: 12-15 % Process: In this dryer two desiccant towers are used. While one tower is in drying, second tower undergoes regeneration simultaneously. Part of dry air coming out from tower in-line goes for regeneration of the second tower. Tower changeover takes place at every 5 minutes by a sequence controller mounted in control panel.

This is a simple alternative for medium & bigger capacities where Heatless Dryer become uneconomical due to heavy purge losses. In this type of dryer the regeneration is accomplished with a very small portion of dried air/gas, which is circulated in the tower duly filled with desiccant and embedded with heating elements. The advantage to this type of dryer is that purge loss is reduced to almost 3-5% dew point upto (-80oC) can be achieved.   Details : This is improved version of heat less dryer where purge air loss is very very low due to regeneration is achieved by dry air at low pressure and at high temperature. To achieve this heaters are provided in each tower to heat the purge air to around 180 Deg C, which enhances its moisture carrying capacities. This hot purge air at low pressure is passed through the desiccant bed to regenerate the Activated Alumina.Features : Capacity -  200 CFM to 1000 CFM Dew Point -  -60 to -80 deg C ADP Purge Loss -  5-10

The Heat of Compression (HOC) dryers are No-Purge Loss type desiccant dryers based on adsorption principle. The hot air from the Compressor at min 120 deg C and higher temp, is used directly for regeneration of the desiccant. After regeneration, this air is cooled down to 40 deg C and then it is dried in second tower. Thus, the use of heaters is eliminated. For eg. in the 6+6 Hrs. Cycle the hot air is fed for regeneration for 4 Hrs. and for balance 2 Hr. a changeover takes place where the air is first cooled in cooler, then dried and before going to the outlet, cools the regenerated desiccant bed, thus bringing it down to ambient temperature. This cycle is reversed for the next 4Hrs. where the Adsorber drying the air in the previous cycle goes for regeneration and vice versa.It’s having least running cost with best quality of air.   Salient Features: Having least running cost Best quality of air Lesser payback period Continuous duty with long efficient service life Easy to install and user friendly Capacity: 750 CFM to 6000 CFM Dew Point: -40 to -60°C ADP Purge Loss: NIL

For Instance High Purity nitrogen DX model is introduced in the field of NITROGEN GENERATION PROCESS, As DX Process leads to reduce oxygen content as low as it can i.e. below 5 ppm.   A PSA system is followed by additional purification unit using palladium as catalyst for removal of oxygen & moisture contents upto 1 PPM, Level with mostly desirable reducing constituent hydrogen (adjustable).   The Palladium –Deoxo unit, used industrially ran with additional hydrogen feed, for exothermic reaction : O2 + 2H2 ----- 2H2O   is run with one reactor filled with Palladium Catalyst. The Nitrogen, coming directly from the PSA system with the remaining oxygen, is mixed over mixer with Hydrogen before entering the catalyst reactor. At the catalyst surface the oxygen reacts with hydrogen to produce water and heat. The heat and water have to be removed by a standard water after cooler and gas dryer to required level. The remaining hydrogen concentration in the Nitrogen is around 0.5 to 1% minimum.   The high purity DX-Model finds application in chemical/electronics/metallurgical industries.   Applications : Mettalurgical, Heat Treatment, Synthetic Fibre Units, Chemical Industries Etc,

This is second type of Deoxo unit is with additional after cleaning using copper for endothermic reaction for removal of extra oxygen, the moisture and hydrogen contents and maintained upto 1PPM level. This Ultra pure nitrogen gas finds application in electronic, synthetic fiber and optical fiber industries.   This De-Oxo unit needs two externally heated filled with copper as catalyst for the endothermic reaction : O2 + 2Cu----2CuO   The loaded copper bed can be regenerated by adding hydrogen during the regeneration step. For this two step process (Deoxidization and regeneration), two reactors are necessary to achieve a continuously operating De-Oxo system. The nitrogen form the PSA system with the remaining oxygen passes one of the reactors without adding hydrogen. ON passing through the reactor, the oxygen is removed by reacting with the copper surface, The advantage of the Deoxo unit based on the copper is that the high purity nitrogen leaves the unit absolutely dry & without any remaining hydrogen.

In this dryer, compressed air is passed though the regenerated desiccant bed for moisture removal and dry air comes out from the outlet. For regeneration of desiccant, atmospheric air is heated to a temp of 175Deg C & passed through the saturated desiccant bed in counter direction. All the adsorbed moisture vaporizes and is vented out. Cooling of the bed may be done with atmospheric air but without heater or some air may be re-circulated through heat exchanger, depending on the dryness of air required. This is a no purge loss type system which can dry air upto(-) 80 Deg.c. Generally such dryers are preferred for higher flow rates.   Salient Features : Low operating cost for high capacities. Dew point upto (-) 60 Deg C can be achieved. Most economical in the range from 1000 CFM onwards

We are the manufacturers, Exporter and suppliers of Ammonia Cracker Unit. We have in house facility and expertise for manufacturing of various Pressure Vessels, Reactors, Absorbers, Columns, Heat Exchangers, Tanks etc.   Product Specifications Hydrogen : 75% Nitrogen : 25% Dew Point : (-) 80°C Pressure : 0.1 to 7.0 Kg/cm²g Plant Capacity : 1 - 500 NM³/hr   Applications Heat Treatment Industry Gas Purification systems Chemical Process Industry SS Wire Industry T.V. Picture Tube manufacturing Industry Brazing Ammonia is dissociated to form H2 and N2 in presence of Nickel Catalyst at a temperature of around 900ºC. The Cracked Gas produced is further purified through Purification Unit. Main application of Cracked Gas is in heat treatment i.e. sintering, brazing, bright annealing of S.S. Wire Production, Blade Production, S.S. Strip and Components Annealing.

We maintain a steady supply of our products courtesy an ultramodern inventory management system and a high-tech storage facility. Our resources enable us to maintain year round products' availability. We maintain a high level of transparency when it comes to payment. Our methods are simple, as per your convenience, and practical. We ensure to agree upon a method during undertaking.

As, we have a well-organized resource chain system, our organization is capable of fulfilling wholesale consignments with ease and make on time deliveries. With our customized packaging solutions, buyers can get packages made according to their specific requirements. Furthermore, they can rest assured the packaging is industrial grade.

We have a dedicated quality control department to ensure the products provided to you are as per international quality management systems. We offer an invoice stating the payment terms as well as other details required for the final payment. In addition, our transaction modes are simple, safe and reliable.