Incubators Dealers in Noida

We are manufactures Peltier Cooled Incubator, Multi Chamber Incubator, Laboratory incubator, General incubator, Bod incubators, these are the testing equipment that is widely used in microbiological laboratories to maintain and cultivate the cell cultures and microbiological cultures. The instruments are used to sustain and control the humidity and temperature conditions inside the laboratories. Excellent controllability, very tiny management fluctuations, low-vibration operation and spectacular energy savings offer the accessorial price from this good adaptation of Peltier technology. With its intensive vary of appliances with Peltier parts for heating and cooling – like the Peltier-cooled setup, the constant climate chamber, the JLS cooled storage setup and also the Peltier-cooling unit for water baths – JLS is that the market leader during this technologically subtle section. Feature Ttemperature range 0°C up to +70 °C Peltier-cooled incubators operate within a temperature range preferable to the fruit fly Peltier-cooled incubators meet APHA specifications for Biochemical Oxygen Demand Thermoelectric cooling technology eliminate the need for a refrigerated compressor Programmable controller allows for 40–step ramp and soak profiles or four files with 10–steps per file No condensation in the interior chamber Noida Machine Tools Due to the closed Peltier cooling system, no outside air is changed. Physically derived, inevitable formation of condensation throughout the cooling method doesn't happen within the interior chamber however on the skin sink. additionally, the within the Peltier components integrated fans guarantee a speedy transport of energy still as associate degree optimum temperature distribution.

Serialization is done before the final packaging and storing of the products in our capacious warehouse. We keep the products separated to ensure rapid delivery in the committed time span. Rooted in Noida(India), the company is providing qualitative products and that too at the most reasonable prices.   SPECIAL FEATURES : Advance micro controller based system, integrated with Graphic LCD and dual Temp. digital display with complete operating feature , warning and alarms for LCD. High quality IR (ceramic) ) heating source with air circulating housing and inbuilt blower. Mains line LED indicator. Display system Indicate the actual baby temp, air temp. with in the chamber of canopy and a LED bar display the heating ON %. Humidity chamber is provided for producing the natural moisture in chamber of the canopy. An audio and visual alarm for errors for error and process of application are also integrates in the system. Low density mattress is fixed in the baby bed of the canopy hood.   Other Details Large Graphic LCD for easy setting of temperature and warnings. Renderd with LCD bar indicator systems to display the heater ON % Special sock observer based folding trolly fixed with heavy duty casters to carry the Incubator for sifling the patient to another place & hospital 1 hour inbuilt battery backup insures the operating & treatment and facility to attached with ambulance battery. An auto mode control systems insures not stop working and safe treatment. Two different calibrated sensor probes are provided with best quality hygienic silicon wire & sensor covers for long lasting durability and easy to clean. Audio, visual alarm system for power failure, sensor open, temperature High, low, Over Range An oxygen cylinder in fixed underneath the baby Incubator control unit with straps for binding. Large LCD integrated with display section combining the 3 segment dual temperature display and sensor's for baby and air. Translucent on canopy fitted with 6 operating window's four on front & rear walls and two side walls and front door with magnetic locks to easy operating the baby for treatment. I.V. Fluid Rod for giving drip to the baby and oxygen parts for providing humidity oxygen for the oxygen cylinder. Humidiy chamber is provided to be filled with water to namage proper humidity with in the chamber. Baby bed in chamber have facility to tilt the bed towards both side approx. 30°   TECHNICAL SPECIFICATION : Input Supply : 230V, Max. Supply Frequency : 50/60Hz. Heater Power : 650W. Temp. Range : Set Temperature from 20-40 Degree in step of 0.1 degree. Air circulation : Integrated Air blower Temp. Sensor : PT 100 Dimension (LXWXH) : 27"x17"x34" (EXCLUDING canopy handle and gas Cylinder bracket. Weight Approx. : 45 kg (without cylinder, but canopy). Castors : four out of two lockable Baby Bed : can be tilt towardss 30Deg. both sides

Description : • Designed for Multi function dry bath heating of test-tubes, micro centrifuge tubes and cuvettes • Ideal for enzyme reactions, Inactivation of Sera, Incubation and other lab procedures • Through choice of block, a wide variety of tubes and vessels can be accommodated in a standard unit • Precise temperature control from ambient +5 °C to 200 °C with ±1 °C accuracy • Supplied complete with block extraction tool • Recessed wellcavity accommodates two interchangeable aluminium insert blocks

• Inner Dim. (H x W x D) mm: 550 x 550 x 550
• Platform Size (inches): 18 x 18
• Can accommodate flask (At a time): 12 Nos. of 250 ml to 500ml
• Approx Volume (Liters): 165
• Temperature Range: +5°C to 60°C (Resolution 0.1°C)
• Temp. Controller: By Microprocessor Based PID Digital Temperature Indicator cum Controller
• Shaking type: Orbital
• RPM Display: Digital
• Shaking Speed: Variable speed from 20 RPM to 250 RPM
• Temp. Display: Digital LED Display for Set Value(SV) and Process Value (PV)
• Air Circulation: By forced convection System
• Insulation: By Glass Wool Insulation
• Electric Supply: 220/230V AC, 50/60Hz single phase

The three digital display indications provide the Set Temperature, Air Temperature and Skin Temperature. Two function control modes provide the clinician more flexibility while optimizing the thermal environment. The removable heater and control unit make it easy to clean and service. A full complement of alarm provides safety convenience, with both audible and visual indicators: Probe Failure, Power Failure, High Temperature.

Baby Incubator, Accounting Consultant, Patient Monitor

Hicare Neonatal Intensive Care Incubator, Dengue NS1, Mesh, Hinsurge Brace

Infant Incubator, Bed side Locker, Infant Radiant Warmers, TREAD MILL TEST