Process Control Trainer Dealers

• System Dimensions: 4.5 Ft. X 1.5 Ft. X 4.5 Ft. (H)
• Working Pressure: 7-8 Kg/cm3
• Air Compressor Motor: 1 H.P
• Electric Supply: 230 V AC

Backed by a well-organized and structured storage unit, we efficiently store the entire array of products in a secured manner. Furthermore, we ensure total security of the products. Raw material that is used for preparing the offered lot is sourced from the genuine vendors. Also, we procure it only after complete quality inspection.   Features : Feedback control P, P+I, P+I+D controller action Sturdy design SCADA software User friendly Leak proof safety measures Increased electrical safety Avail with training manuals and mimic charts Inbuilt safety measures M.S powder coated cubical plant System frame with caster wheel arrangement

Multi Process Control Trainer is the most flexible and modular system in its range. It is meant for studying various control loops used in industrial processes. Fabricated using high quality material, it can be used for elaborating the study of Controlling Different Process parameters like flow, level, pressure and temperature

• Warrantty: 2 Years

Features: Training bench with aluminium column frame structure Power supply built-in integrated installation Safe and Convenient to use Not easy to damage Liquid level system On-Off Level and temperature controller Ratio and feedback - Feed Forward Controller

Universal Process Control Trainer Code resembles a typical small industrial process plant with different processes and parameters. The plant is controlled using DCS control (Hybrid controller) with SCADA software for supervisory control systems. A jack plug and socket patch board provided at the interface of the process facilitates configuration of different experiments and allows user to develop and test own control strategies. The patch board also allows direct access to transmitters and control elements enabling user to connect external controllers, PLCs & DCSs. The product layout is designed to educate, train and develop the user to cover various aspects of process control. User can configure the product from study of basic components to advanced study of complex process control loops using advanced DCS control.

• Material: Mild Steel
• Voltage: 220 V
• Usage/Application: Industrial
• Tank Capacity: 10 L
• Automation Type: Semi-Automatic
• Manufactured by: Nityug Technologies LLP
• Rust Proof: Yes

  Type of control PID Control unit Digital indicating controller, Input Type 4-20mA Level transmitter Type Electronic, two wire, Range 0–500 mm, Output 4–20mA, I/P converter Input 4-20mA, Output 3-15 psig Control valve Type Pneumatic, Size 1/2", Input 3–15 psig, Air to close, Char. Linear, Rota-meter 10 - 200 LPH Pump Fractional horse power, type submersible with Sump Tank Process tank Transparent, Acrylic, with 0-300mm graduated scale Air filter regulator 0-2.5 kg/cm2 ,Pressure gauge 0-2.5 kg/cm2, 0-7 kg/cm2. 230 +/- 10 VAC, 50 Hz, 1 phase with On/Off Switch.

A low cost pilot plant, available in various models, the multi-process control trainer is designed to familiarise students with the control of various parameters like flow, level, temperature and pressure. Various control schemes such as feed back, feed forward cascade, ratio, and batch are demonstrated on a single system. This system is PC interfaced. Optionally, an additional discrete PID controller can also be supplied.

Process Control Trainer offered by us is known for high performance and is very easy to understand. The set up of our Process Control Trainer consists of a centrifugal pump coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop water circulation. Features: Water Circulation Closed loop. Compact & stand-alone set up Powder Coated Painted structure Simple to operate & maintain Specifications: Pump : ½ HP Centrifugal Pump. AC Motor : ½ HP 230V AC. Measuring tank : 40 Ltrs. Made of MS with FRP Lining and fitted with piezo meter tube & scale. Piping & Fittings : GI/PVC with necessary Valves. Control Unit : PID Controller. Fitted with DP Transmitter, Capacitive type Level Transmitter, Temperature Transmitter with PT100Sensor, Pressure Transmitter, Pneumatic Operated Control Valves, I/P Converter, P/I Converter,Thyrister Drive for Heater Control, Pressure Gauges. Control panel : 1HP DOL Starter. Digital Timer. MCB Load and Line Indicator.   Required Utilities : Electric supply Provide : 230 +/-10 VAC, 50 Hz, Single phase Electric supply with proper earthing. (Neutral . Earth voltage less than 5 VAC.) E5A,Three pin socket with switch for pump. Water supply Tap water connection ½. BSP

Air Pressure Control Trainer is set up to compile the fundamentals of closed loop air pressure control and other features related to it. This basically gives an idea regarding air pressure as it is equipped with first quality raw materials sourced from reliable vendors. This is an industrial grade instrument that exhibit realistic working environment. Features Feedback control P, P+I, P+I+D controller action Sturdy design SCADA software User friendly Leak proof safety measures Increased electrical safety Avail with training manuals and mimic charts Inbuilt safety measures M.S powder coated cubical plant System frame with caster wheel arrangement Specifications System Dimensions : 4.5 Ft. X 1.5 Ft. X 4.5 Ft. (H) Working Pressure : 7-8 Kg/cm3 Air Compressor Motor : 1 H.P Electric Supply : 230 V AC

Specifications Built in power supplies On board DPM Manual valves Rotameters 200LPH Flow meters/Transmitters Level Sensor/Transmitters Level Tank 20 Lt. Liquid storage Tank 70 Lt. Fractional horse power centrifugal pump - 500LPH Ratio Control Cascade Control Feedforward Control Panel (Optional). Computer interface card PC Based PID controller software with provision for Ratio & Cascade control.Operating modes : Simulator ModeProcess Monitoring ModePC based PID controller Mode External Accessories (Optional) Real time systems (optional)

Multi-Process Control Trainer Technical Description This control trainer is a comprehensive unit featuring only industrial components. It contains a transparent tank for liquid-level and pressure control, a corresponding pipe for flow control, and a two-circuit system with a plate heat exchanger for temperature control. Alternatively, a pneumatically operated control valve or a speed-controlled pump are used as actuator. The parameters of the digital controller can be adjusted over wide ranges so that a large number of different process conditions can be investigated. Electronic sensors measure the individual process values. A three-channel recorder with current inputs is included for recording the control behavior over time. Software for the process visualization and Profibus card are available as an accessory.

PCS-1 Process Control Trainer, RAB-250 UMI Hardness Testers

We are offering Cascade Control Trainer. The setup is designed to understand the advanced control methods used for complex processes in the industries. Different experiments like flow, level and cascade control can be configured and studied with the setup. It consists of water supply tank, pump, level transmitter, transparent level tank, orifice meters with differential pressure transmitters, rotameters, pneumatic control valve, i/p converter and serial based dual loop controller. These units along with necessary piping are mounted on support housing designed for tabletop mounting. The controllers can be connected to computer through usb port for monitoring the process in scada mode.

Ieicos temperature process control system is an advanced experimental bench designed for study and understanding of temperature control process, components involved in monitoring and control of temperature, stability and time constant of temperature control etc. In a table top size for easy handling and setup. Designed to take very little of valuable lab space, it is designed to provide utmost features with little components at low cost. The temperature process control trainer can be used to study onoff control, proportional (p), proportional-integral (pi), proportional-integral-derivative (pid) operation, tuning of controller in open loop and closed loop, auto-tuning and stability.

Multifunction Process Control Trainer

Anshuman Process Control Trainer, Logic Analyser, Analog-Digital Trainer

Cascade Control Trainer, Distributed Control System