Regent Hitech Private Limited Sector 59, Noida, Uttar Pradesh

The check valve is used when the flow is needed only in one direction. The quality of a check valve is that it gets closed automatically to stop back flow. These valves are used in wide variety of location. One of the important precaution at the time of installation is the check valve should be downstream the flow of water. To have a genuine check valve of different types like: Single plate check valves Double Plate Check Valves Swing Type Check Valves Non Slam Disk Check Valves Etc. trust our products.

The check valve is used when the flow is needed only in one direction. The quality of a check valve is that it gets closed automatically to stop back flow. These valves are used in wide variety of location. One of the important precaution at the time of installation is the check valve should be downstream the flow of water. To have a genuine check valve of different types like: Single plate check valves Double Plate Check Valves Swing Type Check Valves Non Slam Disk Check Valves Etc. trust our products.

Material : Forged Stainless Steel

Pressure : 700 Kg/Bar (1000 Psi)

Brand Name : Regent

End Connection : Screwed End Bsp

The check valve is used when the flow is needed only in one direction. The quality of a check valve is that it gets closed automatically to stop back flow. These valves are used in wide variety of location. One of the important precaution at the time of installation is the check valve should be downstream the flow of water. Regent Wafer Type Check Valves has distinct advantages over conventional Swing Check Valves.

Model : BVS Vavle Design : 3 Piece Ball Valve Size Range : 12" to 4" Body : CF 8 (S.S. 304), CF 8 M (S.S. 316), CAST STEEL ( WCB 216) Ball : CF 8 (S.S. 304), CF 8 M (S.S. 316), Stem : S.S. 316, S.S. 304 Seat And Seal : PTFE Pressure Rating : 150 # End Connection : Screwed End Operation : Leaver Gear Actuator

Regent soft seat Butterfly Valves have centric disc construction, single piece body, and resilient seated seat in various materials of constructions to give a 100% tight shut-off in both directions of flow against vacuum and design pressure ratings of PN 1.0 and PN 1.6. This series was designed to meet the stringent requirements for HVAC, Irrigation, OEM, Commercial and Institutional application and wherever positive shut-off is required for liquids, gases and slurries.

Pressure : 40 Kg/Cm2

The check valve is used when the flow is needed only in one direction. The quality of a check valve is that it gets closed automatically to stop back flow. These valves are used in wide variety of location. One of the important precaution at the time of installation is the check valve should be downstream the flow of water. To have a genuine check valve of different types like: Single plate check valves Double Plate Check Valves Swing Type Check Valves Non Slam Disk Check Valves Etc. trust our products.

End Connection : Screwed End Bsp

We are main supplier of this product.

Size : 40 Mm To 200 Mm

Material : Cast Iron, Stainless Steel

Brand Name : Regent

Model : BVF Vavle Design : 3 Piece Ball Valve Size Range : 12" to 12" Body : CF 8 (S.S. 304), CF 8 M (S.S. 316), CAST STEEL ( WCB 216) Ball : CF 8 (S.S. 304), CF 8 M (S.S. 316), Stem : S.S. 316, S.S. 304 Seat And Seal : PTFE Pressure Rating : 150 # End Connection : Flanged End Operation : Leaver Gear Actuator

Design Features Regent Wafer Type Check Valves has distinct advantages over conventional Swing Check Valves. Stronger, Lighter and Smaller size. It weights about 18yh weight of conventional valve. Structurally Sound Hydraulically Engineered. Flexible Installation Can be installed in horizontal or in vertical line without any special pipe support. The light weight and short face-to-face dimension of valve makes it easy to install between standard gaskets and line flanges.

Technical Data Manufacturing Std. : BS 1873 Face to Face, End to End : ASME B16.10 End Connection : Flanged Ends to ASME B16.5 RF : Butt Weld Ends to ASME B16.25 Inspection and Testing Std. : BS 6755 ( Part - 1 ) Test Pressure Testing Hydraulic Pneumatic 150 # 300 # Body 425 PSIG 1100 PSIG Back Seat 300 PSIG 800 PSIG Seat 300 PSIG 800 PSIG 80 PSIG

echnical Data : Manufacturing Std. : API 600 Face to Face, End to End : ASME B16.10 End Connection : Flanged Ends to ASME B16.5, RF : Butt Weld Ends to ASME B16.25 Inspection and Testing Std. : API 598 Test Pressure Testing Hydraulic Pneumatic 150 # 300 # Body 425 PSIG 1100 PSIG Back Seat 300 PSIG 800 PSIG Seat 300 PSIG 800 PSIG 80 PSIG

Key Features Heavy Duty, square grooved design seat with unique "Center Lock" feature prevents seat movement during the unseating and seating of the disc. All seats Peroxide Cured as standard to yield the best elastic properties and give enhanced seat life. Disc stem engagement is achieved by a precision machined "Double D" engagement. This method provides all the advantages of one-piece stemdisc connection. Also eliminates any disadvantages associated with other methods of stemdisc engagement such as taper pins, disc retaining screws etc. Superior Stem Retention System: stem is securely retained in the body with a stainless steel washer and a heavy-duty circlip, providing "Blow Out Proof" stem assembly. The design provides for easy on-site disassembly for quick seat replacement. Double "O" rings moulded in the seat at the seatdiscstem junction achieve reliable primary and secondary sealing at the stem. BodyFlange sealing achieved by built-in O ring serving as a flange gasket. All valves designed for installation between ANSI Class 125150 flanges, DIN 2501 PN10PN16 and BS10 Table D and E. Top flange as per ISO 5211 for direct mounting of gear operators and actuators.