Rigil-Geny India Private Limited Sector 63, Noida, Uttar Pradesh

  This is wide current range Three Phase Reference Standard Meter, suit for Stationary Three Phase Energy Meter Test System.High accuracy up to 0.02%.Testing type:3 phase 4 wire,3 phase 3 wire.Testing mode: active power,reactive power,cross connection reactive power,apparent power Measuring voltage,current,phase,frequency power etc of each phase .Measuring phase angle of phase to phase,sum of active power,sum of reactive power etc .Test data can be managed by computer via Rs232 interface.

We deal in Three Phase Meter Test System with 6,12,24,48 position .Testing mode: Active Power, Reactive Power, Cross Connected Reactive Power .Installing the ICT in each meter position to Test Three-phase Meters with closed links between the current and voltage measuring circuits (I-P Links)

Type : Test Bench, Energy Meter Testing

Certification : CE Certified, ISO 9001:2008

Condition : New

Automatic Grade : Automatic, Fully Automatic, Manual, Semi Automatic

Output 3 ways of separate voltage and current signal, suit for testing three phase and single phase energy meter. High accuracy and high stability output With RS232 interface for automatic operation With keyboard for manual operation(optional) 2nd-41st harmonic,output amplitude and degree can be programmed Aluminum alloy material, light and strong,prevent corrosion With the protect function of overload, short voltage circuit and open current circuit Simple control software,easy for operation The power source is accredited to conforms to EU health and safety standards with CE certificates

This Meter test systems adopt the most advanced electronic measurement technique and modular concept combine the difference reference standards and power amplifier to satisfy customers & their  requirements in electric energy meter manufactures, electric power utilities, metrology laboratory, measuring and quality examining departments and factories or enterprises.

This Reference Standard Meter is of 0.05%accuracy .Its High performance-price ratio .Testing mode: active power, reactive power .Measuring voltage, current, phase angle, frequency, Power factor, active power, reactive power, apparent power .High stability .Wide testing range .Large size LCD display screen .With communication port to PC .The reference standard meter is accredited to conforms to EU health and safety standards with CE certificate.

The meter test systems can measure mechanical meters, electronic mechanical meters and electronic meters by the way of automatic, semi-automatic or manual operation .Testing mode active power, reactive power With MSVT, can test single phase meters with closed links between the current and voltage measuring circuits(I-P links) With current output switch, can calibrate 2-element meters (optional) . Installing Rs232 Ethernet communication ports in each meter position, to realize automatic calibration of electronic meters  (optional) 

Meters under testing: 1P2W .Testing mode: active power, reactive power, cross connected reactive power.With current output switch, can calibrate 2 element meter .With MSVT, can test single-phase meters with closed links between the current and voltage measuring circuits (I-P links) .Simultaneously measure meters with same specifications but different meter constants .Automatic positioning rotor mark of disc of mechanical meter, with more efficiency. The meter test system can measure mechanical meter, electronic mechanical meters and electronic meter by ways of automatic, semi-automatic or manual operation.With the protection function of overload, short voltage circuit and open current circuit.The swing together of the scanning heads simplifies the control.Starting test and creeping test .Aluminum alloy material, light and strong and corrosion resistant .The testing software with friendly Windows 2000 /XP /7 /8 /10 operation system, includes functional module of all kinds of modern energy meter needed, to reality error test, harmonic test, demand test, influence test etc

Type : Test Bench, Energy Meter Testing Equipment

Certification : CE Certified, ISO 9001:2008

Condition : New

Automatic Grade : Automatic, Fully Automatic, Manual, Semi Automatic

Meters under testing: 1P2W Testing mode: active power, reactive power, cross connected reactive power With current output switch, can calibrate 2 element meter With MSVT, can test single-phase meters with closed links between the current and voltage measuring circuits (I-P links) Simultaneously measure meters with same specification but different meter constants Automatic positioning rotor mark of disc of mechanical meter, with more efficiency.

 yc99t-3c is a portable three phase meter testing equipment(calibrator), suit for lab and local use. yc99t-3c calibrator utilizes the testing technology with the lasted development of the energy meter calibration. yc99t-3c/yc99t-5c has exactly software function as yc99t-3c calibration, but different voltage and current output.yc99t-3c calibrator supports dlt-645(2007) communication protocol , and can complete demand indication error, demand period error, time switching error, rate period energy indication error and other multi-function test projects . yc99t-3c calibrator has constant temperature crystal oscillator, which is able to verifies the daily time error of electric energy meter.yc99t-3c is designed with fantastic panels screen and wiring arrangement. the front and rear panel are designed to be easy-operating.yc99t-3c not only procides normal meter testing, it also can be used as harmonic power output equipment ,which is able to create stable harmonic output.meter under testing: 3p4w, 3p3w, 1p2w .testing mode: active power, reactive power.the calibrator is combined by a power source and calibration electronic instrument with wide current and voltage output range.starting test and creeping test are supported.test data can be managed by computer via rs232 interface.yc99t-3c not only can be operated by equipment but also can be controlled by pc .calibrate energy meters automatically, which including items, such as , preheating, starting .creeping, error, influence, quantity test etc.

YC99T-5C is a portable three phase meter testing equipment(calibrator), suit for lab and local use. YC99T-5C calibrator utilizes the testing technology with the lasted development of the energy meter calibration . YC99T-5C has exactly software function as YC99T-5C calibration, but different voltage and current output  YC99T-5C  calibrator supports DLT-645(2007) communication protocol , and can complete demand indication error, demand period error, time switching error, rate period energy indication error and other multi-function test projects . YC99T-5C Calibrator has constant temperature crystal oscillator, which is able to verifies the daily time error of electric energy meter.YC99T-5C is designed with fantastic panels screen and wiring arrangement. The front and rear panel are designed to be easy-operating.YC99T-5C not only procides normal meter testing, it also can be used as harmonic power output equipment ,which is able to create stable harmonic output .YC99T-5C and YC99T -3C has similar function, but different in Voltage and current output ,YC99T-3C has more channel of current and voltage.Testing mode: active power, reactive power.Meter under testing: 3P4W, 3P3W, 1P2W.The calibrator is combined by a power source and calibration electronic instrument with wide current and voltage output range.Starting test and creeping test are supported .Test data can be managed by computer via Rs232 interface.YC99T-5C not only can be operated by equipment but also can be controlled by PC.Calibrate energy meters automatically, which including items, such as , preheating, starting, creeping, error, influence, quantity test etc.

Reference standard and power source intergrated, can be used as portable test system. High performance-price ratio. Wide output range(voltage OV-480V,current 1mA-120A) Input two pulse signal for two meters synchronously calibration or one meter's active power and reactive calibration With manual keyboard,or auto-operated by PC Internet and RS 232 and port for communication with PC

Test various single and three phase electronic and mechanical meters Automatically or manually test single or three-phase energy meter including basic accuracy test, creeping test, starting test, standard deviation etc., the test plan can be fixed by customer Execute the influence test includes voltage influence, frequency influence, harmonic influence, reverse phase sequence influence, unbalance voltage influence test Support DLT-645 communication protocol or customized, and execute some tests for multi-functions energy meters More output terminals for more operations: RS232, RS485, extend I/O, Ethernet, USB, Wi-Fi and etc., Output 2...63 harmonics 8 inches TFT color screen and friendly operation system and Can test 3 PCS meter in max

This is portable single phase calibrator is used to calibrate single-phase energy meter, and also it can be used as power source. Feature custom voltage, current range , set the output frequency verfication process can be adopted by  the keyboard or computer operations An external standard PC keyboard can be operated Storage 1000 group test results and can be retrieved and display in the local RS232 interface, can be used with computer system voltage short/ current open/ overload protection Main Technical Data   Meter position: 1...3 Accuracy:  0.1 Voltage output:  0V ... 300V AC Current output:  0 ... 120A  Phase angle output: 0o ... 360o Frequency output: 40Hz ... 70Hz

We  offer complete solutions for Gas Meters Testing Equipments , Testing Bench , Portable Gas Meter Test Equipment.

supports dlt-645(2007) communication protocol, and can complete demand indication error, demand period error, time switching error, rate period energy indication error and other multi-function test projects.constant temperature crystal oscillator, which is able to verifies the daily time error of electric energy meter.fantastic panels screen and wiring arrangement. the front and rear panel are designed to be easy-operating .it can be used as harmonic power output equipment, which is able to equipment, which is able to create stable harmonic output. testing mode: active power, reactive power .meter under testing: 3p4w, 3p3w, 1p2w .the calibrator is combined by a power source and calibration electronic instrument with wide current and voltage output range .starting test and creeping test are supported test data can be managed by computer via lan interface .yc99t not only can be operated by equipment but also can be controlled by pc .calibrate energy meters automatically, which including items, such as, preheating, starting, creeping, error, influence, quantity test etc.   primary competitive advantages:   ·          easy operation            strong and stable harmonic power source output   ·          multiple-type of active and reactive energy meter test

the meter test system can measure mechanical meter, electronic mechanical meters and electronic meter by ways of automatic, semi-automatic or manual operation.meters under testing: 1p2w .testing mode: active power, reactive power, cross connected reactive power .with msvt, can test single-phase meters with closed links between the current and voltage measuring circuits (i-p links).with current output switch, can calibrate 2 element meter(optional).simultaneously measure meters with same specifications but different meter constants .automatic positioning rotor mark of disc of mechanical meter, with more efficiency.starting test and creeping test .with the protection function of overload, short voltage circuit and open current circuit.the swing together of the scanning heads simplifies the control.aluminum alloy material, light and strong and corrosion resistant.the testing software with friendly windows 2000 /xp /7 /8 /10 operation system, includes functional module of all kinds of modern energy meter needed, to reality error test, harmonic test, demand test, influence test etc,.

Condition : New

Phase : Single Phase

Certifications : CE Certified, ISO 9001:2008

extremely high power stability (10 ppm) high accuracy class: 0.1, 0.05 over 18 months long warranty test of 2 elements energy meter 3~60 single phase electric energy meter test bench neutral current test(optional) timing error test influence test of voltage, frequency, and harmonic generating installing rs232, ethernet communication port in each meter position. tilt impact test (optional)