Servo Stabilizer Dealers in Sector 6, Noida

• Application: INDUSTRIAL RESIDENTIAL
• Input Voltage: 140 TO 180 V SINGLE PHASE OR 240 TO 380 V THREE PASE
• Frequency: 50Hz
• Phase: SINGLE AND THREE
• Place of Origin: INDIA

Air Cooled servo voltage stabilizers us natural ambient air for cooling. They occupy less floor space as compared to Oil cooled stabilizers.Rating are 2 to 20 Kva Single Phase and 6 Kva to 150 Kva Three Phase

• Brand Name: Unicom
• Siemense Gray: Dark Gray

We are offering servo stabilizer are used for balancing voltage it controles flectuions of voltage by using this product we can save our electric products from burning.

• Brand Name: 7hills
• Application: Precious electrical equipments
• Phase: single/three

With our excellence in this field, we share forefront for supplying world-class array of products from Noida(India). We have hired expert warehousing personnel who keep a stringent check on the entire range of stored lot ensuring zero damage to the products till the final dispatch to the clients.   Technical Description : Servo voltage stabilizer Digital display high low voltage cut off Efficiency (Approx.)  -  99.5% Capacity  -  75 KVA, 100 KVA, 125 KVA, 150 KVA Input Voltage  -  140 – 490v, 175 – 490v, 210 – 490v, 240-490v, 280- 485v Output Voltage  -  400 V+/- 1%, 3 Phase, 50Hz. Cooling  -  Oil Cooled Type  -  Indoor Duty Cycle  -  100% Continuous Regulation  -  +/- 1% or Better Ambient Temperature  -  -10 degree C to +45 degree C Temperature Rise  -  30 degree C Above Ambient Mounting  -  On Uni-Directional Wheels Earthing  -  Two Numbers of Earthing Terminals Cable Termination Box  -  Input / Output Connections Wave Form Distortion  -  Virtually Nil Features : Very high efficiency, > 98% on load Introduces no waveform distortion. Unaffected by power frequency variation between 47 to 53 Hz. Unaffected by load power factor condition. Large short time overload handling capacity. This is very necessary for taking care of the starting surge of induction Motors. Step less continuous voltage correction. Fully solid state Electronic IC Control. AC mains operated, very reliable, low speed high torque, instant start stop, reversible, permanent Magnet Synchronous motor with special damping circuits to ensure superior dynamic response. Its starting, running and stalling currents are the same thereby making the motor burn proof when stalled forcibly for long periods. Very close tolerance of the Output voltage i.e. within +/- 1% of the set voltage. The output voltage can be set between 180-260 volts approx. for single phase units or 300-450 volts approx for three phase units by means of the Digital meters provided on the front panel. However it should be noted that the input range over which the unit will operate normally will change with the adjustment Auto and manual switches provided for testing the unit and also for setting output voltage in case of Auto/Control Card failed. Digital Voltage meters with selector switches for input, output and phase monitoring Optional Features (At extra cost) : In addition to the standard design features listed in the previous section we also offer a range of additional itemsPower-On-Delay : After switching ON the MCB on the front panel, power is supplied to the connected load after a delay of approximately 5 sec, during this time delay the output voltage is stabilized, thus ensuring that initial abnormal voltage is not supplied to the connected load.Output Trip : If the output voltage goes beyond +/- 5V of the set output voltage for approximate 5 sec then the output trips, disconnecting the supply to the connected load, thus ensuring that connected load is not supplied with abnormal voltage. Ampere meter for reading load. Audible Alarm to indicate Input high/low & Output high/low.. Surge & spike suppressor for filtering input noise and spikes. Over current, MCB, protection and Residual current, RCD, protection

• Specifications: Up to 2000 KVA

We are one of the leading manufacturers and suppliers of high quality Servo Voltage Stabilizers such as micro processor controller based servo voltage stabilizers, automatic voltage stabilizers and manual voltage stabilizers. These stabilizers are manufactured using premium quality material and latest technology. Designed at par with international quality standards, these stabilizers are precisely tested on various quality parameters to ensure their effective performance, functionality and durability.We deal all over India but looking queries from Delhi & NCR

We bring forth an immaculate variety of industrial Servo Voltage Stabilizer that are engineered by adept technocrats to attain perfection. The product is known to protect electrical equipment from power fluctuations. These Stabilizers involve in comparing the output voltage with built-in voltage source. Owing to their optimal functionality, these are highly acclaimed in the market. We offer them at highly affordable rates in the industry. Auto, Manual Operation With O/P Voltage Raise and Low push buttons Miniature pot to set O/P voltage Separate Load on, off push button switch Auto load on with customized timer delay optional Fully solid state and single PCB design incorporating protections and control User friendly front panel with separate I/P and O/P voltage metering with phase selector switch and phase wise high voltage, Low voltage & Output on indications A/C Synchronous motor coupled with Variant to facilitate high rate of voltage correction Silent operation, construction convenient for easy serviceability Proper ventilation and cooling method is used as per models

• Country of Origin: Made in India
• Phase: Single Phase
• Operating Temperature: 0-45 Degree C
• Input Frequency Range: 130-300 Hz
• Operating Frequency: 50Hz
• Servo Motor Drive: Cooper Winding
• Brand Name: JDM

• Capacity: 160 KVA
• Type: Suitable For :  100% BALANCE/UNBALANCED LOAD 100% BALANCE/UNBALANCED SUPPLY
• Application: Indore Type
• Phase: 3-Phase, 4 Wires
• Frequency: 50 Hz
• MAKE: SUCON
• Input Voltage: 300-480 Volts ( Phase to Phase )  170-280 Volts ( Phase to Neutral )
• Output Voltage: 400 Volts +/- 1% ( Phase to Phase ) 230 Volts +/- 1% ( Phase to Neutral )
• Response Time: Instantaneous ( mili sec. )
• Speed of Correction: 20 to 60 V/sec ( as required )
• Mode of Operation: Automatic/Manual
• Suitability: Suitable for all Power Factore.
• Duty Cucle: Continuous 24 Hrs.
• Efficiency: more than 98%
• Losses at No Load: 0.4% of the total capacity
• Losses at Full Load: 1.9% at full load.
• Transformer Oil: "A Grade" tested & certified as per IS335.
• Temp. Rise: 45 C Deg. Cent. Above Ambient.
• Laminations Used: Imported Low Losses Laminations - M4 Grade
• Copper Used: 99.9% Pure Electrolytic Grade.

Servo Voltage Stabilizer, Electrical Installation, Transformer Wire

transformer coil, Transformer

Servo Voltage Stabilizer, Electrical Panel

Servo Voltage Stabilizer, dc servo motor inverter, Variable Auto Transformer

Servo Stabilizers, Batteries, Diesel Generators, Inverters

Servo Voltage Stabilizer, Auto Transformers, Ups Inverter

Servo Control Voltage Stabilizer, Torodial Core, Torodal Transformer