Statcon Powtech Pvt. Ltd. Sector 59, Noida, Uttar Pradesh

STATCON POWTECH offers Solar Hybrid type DC Power Supply for the critical application like Telecom, Railway Signaling & Telecom, Gas pipelines, installation of Remote Satellite/Broadcasting installation and much more. The Hybrid system takes in Solar Array as first priority and charge batteries and feeds load demand. If Battery is deep discharged and Solar is low, it can take balance current from mains based SMPS charger simultaneous till battery gets fully charged. In addition to it, if the battery gets discharged beyond a certain level, ‘DG START’ signal is generated which can start and stop DG set. The DG so started can be programmed to run for specified time duration 1,2,3,4 hours. ‘DG STOP’ command will stop it. The whole equipment can be supplied up to any power and any type of VRLA, flooded or Ni-Cd Battery Bank. SALIENT FEATURES  Perturb & observe MPPT charging algorithm, ideal to track maximum power point.  Universal input range of AC mains for SMPS charger.  Automatic current sharing between Solar & Mains with solar priority.  CV/CC Battery charging, current sharing & temp. comp for Solar charger/SMPS.  Intelligent DG controls features.  Provided with lighting & Surge protecting on both inputs.  Expandable for any power from 1.5KW up to 25KW DC.  Supports all types of battery.  Remote monitoring via standers RS485 bus.  Network connectivity via Ethernet /SNMP for central monitoring.  Active current sharing between solar charger & SMPS.  Wide input SMPS for developing countries.  Excellent performance up to 50 degrees of temperature. APPLICATIONS  Telecom/New BTS installations  Gas Pipeline/Cathodic protection  Railway signaling/Telecom  Satellite Earth Station/Remote monitoring Station of Defense

STATCON POWTECH offers a comprehensive range of Solar Water Pump Controller for AC water pumps. These Controllers are suitable for operation on 3000W to 39000W PV Array under various sun conditions. Statcon Powtech controllers are suitable for both surface mounted and deep well centrifugal submersible pumps. IP55 enclosures make them suitable for outdoor duty. They are suitable for 2.1 to 26KW, 3 Phase, 415V, 50-60Hz pumps. SALIENT FEATURES  Automatic Start and Stop (Shut-Off) according to Sun irradiations (intensity).  Soft start controlling to prevent inrush current.  Working temperature up to +55°C.  Individual operation switches for AC mains and PV arrays (Optional).  Isolation switches for PV array. APPLICATIONS  Bore well irrigation  Drip irrigation  Urban water transfer overhead tanks  Drinking water supply

STATCON POWTECH ‘Off Grid’ series of Single Phase PCU are designed to meet the growing electricity demand of developing countries. The state of art design and intelligent control optimizes the yield of all small and medium level PV plant. STATCON POWTECH ‘Off Grid PCU’ consist of ‘MPPT’ based charge controller and bi-directional inverter with a transformer on AC side. It provides uninterrupted power to the load using solar, battery and grid input in same order of priority. In-house developed latest DSP based pure sine wave technology ensures excellent performance, protection from any kind of malfunction and the high conversion efficiency is achieved. The high conversion efficiency helps in longer battery backup. Ease of operation and plug & play type of design make it an ideal product for all uses. These ‘Off Grid PCU’ are capable of being configured for priority of solar, battery or grid as described below: SALIENT FEATURES When solar energy is sufficient then the output of MPPT charges the batteries along with feeding inverter to produce AC to meet load demand. If solar is not sufficient to charge the battery then both MPPT charger and grid charger charges the battery, in this condition max. power yields from solar to charge the battery. BATTERY PRIORITY When MPPT is not sufficient to meet load demand then the combination of MPPT output and batteries are used to feed an inverter to produce AC to meet load demand. MAINS AT PRIORITY If the battery has low voltage condition then the load is shifted to grid and batteries are charged through MPPT. If MPPT is not available to charge batteries then grid charger becomes active to charge batteries and load is fed from a grid. Once the batteries are fully charged the load is automatically shifted on solar and batteries. Statcon Powtech PCU with higher rated MPPT is available on demand. Statcon Powtech also offers ‘Off Grid PCU’ for welding sets. Statcon Powtech Pump Combo Series is capable of working with DC Pump, utilizing same solar panels installed for DC pumps.

STATCON POWTECH offers state of Art MPPT Solar Charge controllers of various voltage rating. These are designed with technology from Statcon Power Controls Ltd., having 26 years of experience in designing and manufacturing of power electronic equipments for defense, railway, and power sector. The latest in-house developed DSP technology enables excellent performance and protection from any type of malfunction. These MPPTs are capable of being parallel to any number and thus generating sufficient output to produce high power for charging any capacity of batteries. STATCON OFFERS STATE-OF-ART SOLAR CHARGE CONTROLLER: SALIENT FEATURES  Perturb & observe MPPT charging algorithm, ideal to track maximum power point.  High-efficiency solar power conversion.  Can be paralleled up to any number.  Individual Battery path current limiting.  Option of current sharing with SMPS charger.  Temperature compensation for VRLA Battery charging.  Provided with lightning and Surge protection (for rating of 110V & above).  Remote monitoring via standard RS 485 bus (optional).  EMI/EMC compatible modules can be provided on request. APPLICATIONS  Telecom  Independent photo-voltaic system  Tele-metering/remote monitoring  Railway signal & Telecom  Oil/Gas pipeline  Satellite Earth Station/Broadcasting

STATCON POWTECH offers a wide range of String combiners with the IP66 degree of protection with and without monitoring. These are suitable for combing all type of SPV strings. The combiners box with monitoring can easily detect reduced yield or string failure. Protection at string level is available for both +ve and –ve side as per customer requirement. Both external auxiliary powered and self-powered solution is available. These are fitted with output isolator and surge protection and are capable of communicating on MOD BUS 485 communication. Plug and Play nature of these combiner boxes make them the ideal solution for all MW Solar forms. SALIENT FEATURES  Monitoring of up to 24 string available.  Monitoring of string current, bus voltage, cabinet temp., SPD status, S/W status.  Can be customized as per user requirements.  Open to manufacture under your brand name.  No need of special communication cable.  Excellent performance up to 55 degrees of temperature.  Configurable analog / digital inputs & outputs.  Monitoring of string current, bus voltage, cabinet temp., SPD status, S/W status.  MODBUS over Rs485 communication. STATCON POWTECH PRODUCT RANGE FOR SOLAR APPLICATIONS  Single Phase of Grid Solar Power Conditioning Unit.  3 Phase Solar Grid Interactive inverter  Single Phase Grid Interactive Solar Power Conditioning Unit  Solar Hybrid DC Power Supply Unit