Transformers Dealers in Sector 62, Noida

• Material: Metal
• Application: Cooling Purpose
• Warranty: 1year
• Element width: 310mm, 480mm, 520mm, 535mm etc.
• Element thickness: 1.0mm, 1.2mm etc.
• Central distance: 500-4000mm

finned radiators are the main cooling component of the power transformers and special transformers.   the high efficiency finned radiator’s cooling element is manufactured by automatic punching, combining, drop sew-welding and edge cutting with high quality cold rolled steel sheets. We use outside co2 protection welding to do the connection between elements and oil collection pipe.   this technique could avoid the welding residue or iron scrap produced by inner welding, which will affect the heat transfer performance and quality of the radiator. Also the finned radiator will be strictly checked with sealing test and hot oil flushing, its surface with hot-dip galvanizing and painting, to guarantee the product quality.   the finned radiator fully meets the transformer industry standard jb/t 5347 and bs-en 50216-6 when tested by third-party inspection institute.

• Type: High Current Bushing
• Material: Aluminum
• Shape: Round
• Thickness: 10-12mm
• Application: Actuator, Automobile Industry
• Pattern: Plain
• Packaging Type: Paper Box, Plastic Packet

Our company is recognized as one of the proficient Manufacturers, Exporters and Suppliers of High Tension Bushings. These bushings allow the conductor to go in center and be connected to both the ends of equipment. Our bushings are highly demanded in both national and international markets because of their high reliability, easy installation and less maintenance. Buyers are free to place bulk orders and we ensure their on-time delivery.

A switching-mode power supply is a power supply that provides the power supply function through low loss components such as capacitors, inductors, and transformers -- and the use of switches that are in one of two states, on or off. The advantage is that the switch dissipates very little power in either of these two states and power conversion can be accomplished with minimal power loss, which equates to high efficiency.

• Type: Test Bench, Energy Meter Testing Equipment
• Certification: CE Certified, ISO 9001:2008
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic

Meters under testing: 1P2W .Testing mode: active power, reactive power, cross connected reactive power.With current output switch, can calibrate 2 element meter .With MSVT, can test single-phase meters with closed links between the current and voltage measuring circuits (I-P links) .Simultaneously measure meters with same specifications but different meter constants .Automatic positioning rotor mark of disc of mechanical meter, with more efficiency. The meter test system can measure mechanical meter, electronic mechanical meters and electronic meter by ways of automatic, semi-automatic or manual operation.With the protection function of overload, short voltage circuit and open current circuit.The swing together of the scanning heads simplifies the control.Starting test and creeping test .Aluminum alloy material, light and strong and corrosion resistant .The testing software with friendly Windows 2000 /XP /7 /8 /10 operation system, includes functional module of all kinds of modern energy meter needed, to reality error test, harmonic test, demand test, influence test etc

• Country of Origin: India
• Type: Earthing Transformer
• Certification: 9001: 2015
• Application: Power
• Color: Grey
• Phase: Three
• Brand Name: True Power Limited
• Capacity(KVA): 25

True Power Limited manufactures transformers and supplies in India. We manufacture power, Isolation, Distribution transformers, and more at the best price.   

We are engaged in supplying hi-tech Kirloskar Transformers, which are manufactured in accordance with National and International standards like BS, IEC, ANSI, AS. We offer special transformers like HV Testing transformers and Short Circuit testing transformers required in testing laboratories. Also, High Current Furnace transformers, Earthing / Neutral Grounding transformers, Shunt and Series Reactors, Cast Resin Dry type transformers and many other special transformers as per customer requirement. Our Product Range : Distribution Transformers : 160 kVA to 2500 kVA, upto 33 kV classPower Transformers : 2500 kVA to 50000 kVA, upto 220 kV class Special Transformers : Furnace Transformers : Upto 25000 kVA, 66 kV classConverter Transformers : Upto 20000 kVA, 33 kV classHV Power Frequency : Upto 1200 kV, 1200 kVA Testing Transformers : Short Circuit Testing Transformers : Upto 100 kA for 1 second.Cast Resin Transformers : Upto 10000 kVA, 33 kV classEarthing Transformers : For system upto 33 kV class Neutral Grounding Transformers : Flameproof Dry Type Mining : 200 kVA to 500 kVA, upto 6.6 kV class Standards : Kirloskar Transformers are designed and tested to the following standards: Distribution and Power Transformers : IS : 2026, BS : 171 & IEC : 76Converter Transformers : IS : 4540, IEC : 146 & IEEE : 444Furnace Transformers : IS : 2026System Earthing Transformers : IS : 3150 & BS : 4944 The company is capable of manufacturing transformers to any other standards as per customers / consultants requirement

The high frequency noises can interfere with Digital-Electronic equipment causing data corruption, erratic behavior, loss of memory etc. Isolation Ultra Isolation Transformers eliminates such noises & attenuates the spikes to minimal values, providing complete protection against such electrical disturbances. It consists of a double wound transformer with extremely low coupling capacitance to isolate the voltage spikes and reduce noise from main with extremely high insulation resistance.

If you are looking for premium quality Amorphous Transformer, then you are at right place. We at Bamaa Group design and develop highly efficient Amorphous Electrical Transformers that meet expectations of customers both in terms of quality as well as performance. We use industrial grade raw materials and advanced electrical spares in the production process, which ensures that all the Amorphous Transformers offered by us are best available in the market. The unique design of our Amorphous Transformer ensures reduction in the electricity loss and accomplishment of electricity demand more efficiently. To ensure complete satisfaction of customers, we also subject our Amorphous Core Transformers to strict quality checks, and only after they meet internationally prescribed quality norms, they are sent to customers. FEATURES Long service life Highly power efficient Superior operational precision Short response time Easy to install, operate and maintain Strong and robust structure Intelligence protection system WIDELY USED IN Lighting purposes Medical equipment Communication equipment Audio amplifier equipment Electrical control equipment

Deal with various dry type transformers

Features : Reduced maintainence Elimination of fire hazard Reduced cost of distribution of power Reduced space requirements Applications : Generating stations Atomic power stations Traction substations High rise buildings Petrochemical refineries Offshore drilling rigs Underground mines Marine applications

• Material: Metal
• Phase: 3 phase
• Frequency: 50 Hz
• Usage/Application: Electrical Industry
• Finish: Coated
• Surface: Galvanized

We are the leading supplier of this products.

• Working Frequency: 50hz, 60hz
• Speciality: Easy To Install, Four Times Stronger, Proper Working, Superior Finish
• Output Type: AC Single Phase
• Automatic Grade: Automatic
• Tensile Strength: 0-25Mpa, 100-125Mpa
• Production Power: 100-250kw, 250-500kw

We are the main supplier of this product.

• Material: Copper
• Cooling Type: Dry Type/Air Cooled
• Brand Name: A.B.C Transformers
• Usage/Application: Industrial
• Phase: Three Phase
• Minimum Order Quantity: 1 Unit

• Phase: Single Phase
• Voltage: 200-500
• Cooling Type: oil,dry
• Brand Name: ELDEE
• Current: 250A

• Type: 1 Current Transformer Cabinets
• Finish: galvanized steel, grey polyester powder coating
• Available Sizes: 72” X 36” X 12” , 44” X 27” X 10” ,36” X 27” X 10”

Earthing Transformer, Three Phase transformer, multi tapping auto transformer

HT Current Transformer, dg speed sensor, Lt Distribution System, Mcc Panel

Power Transformer, Diesel Generator Set, Portable Generators

lamination core, electrical stamping

Transformer, transformer installation, Control Cabling Services

Transformer, Electrical Control Panel, Lighting Fixture

Industrial Transformer, Power Transformer, Furnace Transformer

Power Transformers, Distribution Transformers

Transformer, Electrical Contractor Services, Erection Services

Transformers, Ac Drives, Led Lightings, Power Transformers

Transformers, Material Handling, Sockets, Circuit Breakers, HVAC

Electrical Lamination, Sheet Metal Components, electrical stamping

Medium Quality Transformer Cable

Power Transformer, Dry Type Transformer, Furnace Transformer