Transformers Dealers in Sector 8, Noida

• Rated Voltage: 33KV or 11KV

Combined ct-vt metering units that are available up to 33kv class are manufactured specifically to meet the needs of electricity supply and captive generating units. These are precisely developed with the help of advanced technology machines to make accurate assessment of the energy transferred. These metering units are manufactured in accordance with the set standards of quality thus assuring optimum functionality.

• Type: LT. Current transformer
• Usage: Metering/ Protection
• Phase: Power Transmission Equipments
• Brand Name: KVA Power Equipments LLP
• Place of Origin: India

We offer low tension current transformer. It is not possible to use line current directly for measurement and relaying purpose due to its high value and insulation problem. Current transformer which is widely known as 'ct' is a piece of electrical equipment which converts line current values which are suitable for the devices to which is connected e.g. Measuring instruments, meters, protection relays. basic functions of cts are : to reduce line current to a value which is suitable for measuring instruments, relays etc. To isolate the measuring instruments, meters, relays etc. From line voltage of an installation. To protect measuring instruments against short circuit currents to sense abnormalities in current and give current signals to protective relays to isolate the defective system.

Variacs or variable auto transformer is a Continuously variable voltage transformer, having a single layer winding on a toroidal core of high grade Steel. In an autotransformer portions of the same winding act as both the primary and secondary winding. the winding has at least three taps where electrical connections are made. One end of the winding is usually connected in common to both the voltage source and the electrical load. The other end of the source and load are connected to taps along the winding. Different taps on the winding correspond to different voltages, measured from the common end.

• Brand Name: Piyano
• Model Number: LMT-30
• Application: For Horn Speakers
• Primary Taps: 30W (100v I/p)
• Second Taps: Com,8 Ohms,16 Ohms,4Ohms (SKP.IMP)

We are offering current transformer. Current transformers are used between ammeter and current carrying wire to measure high currents.

The company has cemented its presence among the reliable Manufacturers, Suppliers and Exporters of ATS Panel. The panels we make available are designed to change the supply power and generator supply. Being a high performance digital controller, our ATS Panels have huge demand in the market. One can obtain these at nominal rates. More about ATS Control Panel : ATS Control Panel, offered by us, is a high performance digital controller used to change the supply power and generator supply. In addition, our ATS Control Panel has an automatic transfer switch that is required in case of emergency power usage in buildings. ATS Control Panel, offered by us, can automatically transfer load from mains power supply to emergency power. In normal conditions when the main power supply fails or voltage drops below 80% of normal voltage, ATS Control Panel that we offer will auto start emergency generator set after a preset. Our ATS Control Panel is available in different colors and packaging. Details : For emergency power usage in building, auto transfer switch (ATS) is essential. ATS (System1) For emergency power usage in building, auto transfer switch (ATS) is essential. ATS can automatic transfer load from mains power supplying to emergency power In normal, when the main power supplying failure or voltage drop below 80% of normal voltage, ATS will auto start emergency generator set after a preset. Specification : 415 V 3phase supply Used At : Hotels High-rise Buildings Apartments Sugar mills Paper mills Size Available : 300 ×1200 ×1800 Material Used : L&T Schneider C&S ABB

VAISHNO CFG" Make low voltage current transformers as per IS standard of IEC 60044-1(BSEN 60044-1). CT's convert an alternating current usually high into a proportional lower one, depending on their use. The design of the Current transformer requires the inclusion of a core and winding which will when connected to its rated burden."VAISHNO CFG" Make CT's are broadly classified into the three groups as per their requirement as under:   Current Transformer: An instrument transformer in which the secondary current, in normal condition is use, subsequently proportional to the primary current and differs in phase it by an angle which is approximately zero for an appropriate directions of correction. Measuring Transformer: A current transformer intended to supply indicating instruments integrated meter, relay and similar apparatus. Protective current transformer: A current transformer intended to supply protective supply. Technical Specification Connection: Two connections on each side. M4 screws with self lifting clamp strap assembly. Insulation Class: E (120*C Max.). Operating frequency: 50Hz. Rated Burden: 1, 1.25, 1.5, 2.5, 3.75, 5, 7.5, 10, 12.5, 15, 20, 30, 45, 60, 100VA. Ambient Temperature: -20*C to +45*C. Thermal short circuit current: 40XIn for wound type CT and 60XIn for bus bar type CT. Instrument security factor: 2.5, 5, 10. Accuracy Class: 0.1, 0.2, 0.5 and 1.0.   DC SHUNTS   "VAISHNO CFG" Make DC Shunts are available for current ratings from 5A to 15000A with mV drops of 50-150mV. DC shunts are manufactured with Stringent Quality Control confirming to IS: 1248. Shunts consist of manganin rods/wire/strips soldered or silver brazed to Brass/Copper Blocks. The Shunts are artificially aged after manufacturing, and then tested on full load.    Technical Specification   Accuracy Class: 1 or 0.5. Over Load: Shunts are capable of withstanding temperatures up to 120*C without any permanent alteration in physical or electrical properties. Over loads and faults which results in temperature of this magnitude can be safety handled. Temperature Coefficient: 0.002% per degree centigrade, above ambient temperature in still air, with free ventilation, temperature not exceeding 120*C at the centre and 90*C at the ends. Insulation: Shunts are supplied un-insulated and protection against contact should be installed where applicable. Over Loads (Brass Ended): Continuous 1.2X Rated Current, 5seconds 4X Rated Current up to 30Seconds.5Seconds: 10X Rated Current up to 5Seconds Ambient Temperatures- Calibration- 20*C Working Range-20*C+60*C.   Application   Shunts are used for measuring current in DC Applications by connecting them to moving coil panel meters, Digital meters or other measuring device. Shunts can also be used in control devices such as power supplies and battery chargers or for load protection.

Riding on unfathomable volumes of industrial expertise, we are engaged in manufacturing an excellent assortment of Dimmer Transformer Coil. Features Heat-resistance High tensile strength Resistant against corrosion

Low Voltage Transformer, Pressure Transducers, AIMI Signal Converter

• Operating Temperature: -10 to 50 Degree C
• Cooling Type: Dry Type
•  :  

• Phase: Three Phase
• Features: Supreme quality, Very reliable,Corrosion resistant
• Cooling Type: Dry Type/Air Cooled
• Input Voltage: 110-485V
• Output Voltage: 220+/-10%
• Material: MS

• Features: Minimum maintenance, Superior functionality, Robust design

• Phase: Three Phase
• Brand Name: Hayliman Electriconics
• Cooling Type: Dry Type/Air Cooled, Oil Cooled
• Power (VA): 1 kva-2000 kva

We offer a broad exhibit of Industrial Oil Filled Transformer that are durable in nature and have high quality. Our whole product offering is execution based and guarantees wide applications. Mechanical Oil Filled Transformer is practically exceptional and is conveyed in very much characterized time period. Features: Highly efficient High functionality Dimensional accuracy

TRANSFORMERS CHOKE COILS, power cords cables

plastic transformer bobbin, plastic moulded screw, Box Handle

Choke Coil

CT PT Combined Metering Unit, Current Transformers, Voltage Transformers

choke coils

domestic ozonators, pizzo buzzers

EE 25 / 9 / 6 Transformers, ferrite transformer, laminated transformers

Current Transformer, Digital Panel Meter, Digital Energy Meter

Choke Coil, ferrite coil inductor, Toroidal Coil, choke

Rod Choke Coil

PCB Mounted Current Transformer, High Power SMPS Transformer

Transformer, d class power amplifier, portable usb amplifier, Microphone

cnc winding machine, copper link current transformers, Current Transformers

Transformer Parts, core bolts, Electrical Components, Studs, Tie Rods