Vaishno Switchgear (p) Ltd Sector 1, Noida, Uttar Pradesh

VAISHO CFG" Make Push Button Stations are IP-55 & IP-65 Degree of Protection and they broadly classified into Pendent push button station and Local push button stations. Pendent Push Button Station are available from One way to Twenty way in die cast aluminum & thermoplastic housing. Local Push Button Station is customized product on special demand of our client with canopy. The LPBS consist of a set of terminal block, Set of push button and Actuators to start and stop.

"VAISHNO CFG" Make Limit Switch is an electromechanical device that consists of an actuator mechanically linked to sets of contacts. They are used to control a machine, as safety interlocks, to count object passing a point. Our Limit Switches with Oil tight & non- Oil tight in cast aluminum housing with contact element. Push Rod Normal Lever, angular lever are used to operate. Open execution contact element with normal, snap action & protective cover in Bakelite housing and nylon GR housing.

Vaishno cfg" industrial hooters are designed to control rooms, power stations, continuous process industries. The unit is housed in a dust and vermin proof die cast aluminum enclosure, surface coated with hard baked paint with an attractive finish. The audio output level ranges from 100db to 120db with effective range under normal condition of noise as 50 meters. Terminal block suitable from 25mm cable is provided to connect the supply. Each unit is thoroughly tested for high voltage, insulation resistance and absolute quality. The range is broadly divided into seven groups:

Feature : Die Cast aluminum body. ,Highly insulated. ,Terminal provided for power supply.

"VAISHNO CFG" Heavy Duty Foot Switches are designed with one aim only to help you produce better, faster with less production down time. Industrial rated and ideally suitable for treadle operated machines systems and built to stand the toughest working conditions. They are Oil tight, dust proof and designed to open and close in either A.C or D.C pilot circuits available in 2 position spring return, front treadle operated with or without guard and now with shield for total protection against inadvertent use.

VAISHNO CFG" Make low voltage current transformers as per IS standard of IEC 60044-1(BSEN 60044-1). CT's convert an alternating current usually high into a proportional lower one, depending on their use. The design of the Current transformer requires the inclusion of a core and winding which will when connected to its rated burden ."VAISHNO CFG" Make CT's are broadly classified into the three groups as per their requirement as under: Current Transformer: An instrument transformer in which the secondary current, in normal condition is use, subsequently proportional to the primary current and differs in phase it by an angle which is approximately zero for an appropriate directions of correction. Measuring Transformer: A current transformer intended to supply indicating instruments integrated meter, relay and similar apparatus. Protective current transformer: A current transformer intended to supply protective supply.

"VAISHNO CFG" Make analog ammeter and voltmeter having a standard of IEC-60414 and of IP-52 degree of protection. This is our most common panel accessories having a dimension of 96X96 mm measuring devices that are designed for flush-mounted installation on doors, wicket doors and front plates of enclosures and cubicles. Analog Ammeter: The ammeters measure in amps the current flowing through an electrical circuit. Analog voltmeter: The voltmeter measures in volts the potential difference of an electrical circuit.