Butterfly Valves Dealers in Noida

• Size: 2" TO 36"

Operation:Actuated Electrical actuated Gas Over Oil Actuated. Moc:CI WCB CF 8 CF 8M CF3 CF 3M CN 7M , Lever Gear Operated Double ActingSpring Return. Standard: AWWA C 504. End:WAFER TYPE FLANGED. Class:PN 10 PN 16 150#.

At the initial stages of sourcing raw material and other inputs, we sternly check for the quality used for the same. With the best range of raw material comes the best product. Thus, equal attention is given while sourcing inputs. We have voluminous warehouse that has loading docks to load and unload goods, well-maintained by the professionals. Our completely automated warehouse is sternly supervised to check that products are kept carefully. Features : Small number of components Lightweight and easy to handle Highly abrasion-resistant Technical Specifications : Diameter( in mm)- 100 to 400 Weight (in kg) - 4 to 20.5 Pressure-proof up to 0.2 bar Application areas - For closing bins, hoppers and silos containing powders or granular materials, Butterfly Valves are among the most widely used equipment worldwide. Butterfly Valves are used in all types of powder and granular material processing They are fitted beneath hoppers, bins, silos, screw or other type conveyors, or to intercept pneumatic conveying ducts Advantages : Small number of components Lightweight and easy to handle Highly abrasion-resistant Easy to fit Quick maintenance Cost effective.

Regent soft seat Butterfly Valves have centric disc construction, single piece body, and resilient seated seat in various materials of constructions to give a 100% tight shut-off in both directions of flow against vacuum and design pressure ratings of PN 1.0 and PN 1.6. This series was designed to meet the stringent requirements for HVAC, Irrigation, OEM, Commercial and Institutional application and wherever positive shut-off is required for liquids, gases and slurries.

We are offering butterfly valves. • internal stemdisc square design. • cast lugs to facilitate centering of valve in pipe lines. • provides 'bubble tight' shut off. • low pressure drop. • can be used for onoff service and throttling balancing.

• Design: Slim - Seal, Offset Disc. Butterfly Valves
• Seat: Neoprene / Nitrile / Viton / Silicon / PTFE Butterfly Valves

Manual, Gear Operated, Electro Pneumatic, Electric Actuated, Cylinder, Spring and Diaphragm Actuator, etc. BUTTERFLY VALVES Usage: Chemicals, Pharmaceuticals, Refineries and Petrochemicals Plants, Paper and Sugar Plants, Drilling Rig and Many More.

  Low Torque Butterfly Valve – BF10R Series     Having over 30 years of experience in the designing and manufacturing of Butterfly Valves, Advance Valves has widened its range by offering Low Torque BF10R Series butterfly valves to its range of Concentric, Double Eccentric & the High Performance Triple Eccentric Butterfly valves. Advance Valves BF 10R series is a lightweight low torque butterfly valve, the compact design of which provides excellent structural stability, flow efficiency and effective sealing resulting in prolonged service life and ease of operation. A unique design feature includes a replaceable seat with tongue-and-groove design which provides complete isolation of flowing media from the body at all times. The uniqueness of this specially-designed lining is that the liner is an easy “clip-on” design eliminating the use of any bonding material whatsoever. This feature therefore avoids disbonding between the valve body and the liner which occurs in other valves during operations over time leading to valve-body damage and consequent valve replacement and down time. This valve is ideal for low pressure applications upto 10 bar (150psi). Advance Valves has optimised the requirement for actuated valves solution whereby its full range of rubber-lined concentric butterfly valves are mated to a single-phase electrical operator. This product has a specially designed high induction motor generating a powerful starting torque. The actuator is compact and lightweight and is maintenance-free - truly a fit-nforget solution, additionally eliminating the headaches of actuator-sizing by the end-users. Key Features of Advance Valves’ Low Torque Butterfly Valve Designs available as per API 609, EN:BS 593, IS 13095. Anti-Static & Anti-Blowout features. Low Operating Torque. Wafer body design from 50mm (12”)upto 300mm (12”). Lugged models available on request. Valve Rating of PN10 (150psi). Operating temperatures ranging between -20 ° C to 120 ° C. Bi-Directional Flow with Bubble-Tight Shut-Off. Capable of both On / Off and regulating services. Seat Liner easily replaceable ISO 5211 Operator Mounting Flange. Perfectly mated to a single-phase electrical actuator. Maintenance and trouble free. Design & Performance Features Explained Replaceable Seat to Body Construction: A special replaceable seat with tongue-and-groove design provides complete isolation of flowing media from the body. The sandwiched replaceable seat design eliminates the need for additional line gaskets. Spherical Design of Disc & Seat: The spherical design of the replaceable seat near its contact area with the stem provides primary stem sealing and reduces the seating / unseating torque. This design not only reduces wear and tear of the contact surface of the seat but also provides tight shut-off and excellent regulating characteristics to the valve. Unique Torque-Reducing Design: A specially designed double “D” connection in the upper stem helps to improve the efficiency of torque transfer from the valve operator to the disc. This helps in optimizing actuator selection. Primary & Secondary Stem Seal Design: The stem seal design incorporates a primary seal inherently ensured by interference fit of the soft seat with the disc hub and the secondary sealing is provided by a special double o-ring design which prevents leakages even under adverse conditions. Smooth Operations: The incorporation of heavy duty corrosion-free bushes avoids shaft deflection and minimizes bearing friction. Integral ISO:5211 Mounting Flange: This standardized operator mounting flange is available for assembly of all operators such as hand-levers, gear-boxes, electrical and pneumatic operators further add to ease in operations. Range of Offerings Design Std.: API 609, EN:BS 593, IS 13095.Face-to-Face Dimensions: API 609 Cat. A, EN 558 Sr 20.Size Range: NB 50mm (2”) to 300mm (12”).Pressure Rating: PN 10 (150psi).Temperature Rating: -20°C to 120°C.End Connection: Wafer (Lugged models available on request).Flange Standard: ASME B16.5 #150, ASME B16.1 #125, AWWA C504, JIS OK.Testing: As per API 598

Manually Operated Valve NPT 32, 52, 53 valves Suitable for 8 bar -18, 10 bar - 14, 12 air pressure Mounting provision for individual unit Suitable for panel mounting

The main variations for this valve are the methods of sealing the perimeter of the disc in its closed position. The simplest variation is to use an elastomeric lined bore which is an interference fit on the disc. The other variations are based on offsetting the disc plane from the axis of rotation allow the disc to close against a circular face seal such that the fluid pressure increases the seal effect. Metallic seals are available allowing the valve to be used for a wide range of fluids at high temperatures

Butterfly Dampers are available as motorized, pneumatic or hand operated units. They can be supplied with accurate positioning actuators or as a simple open I closed configuration. The shaft stubs are bolted to the robust damper blade.This allows the flap to be replaced easily. Sealing strips are fitted to the damper casing and the damper blade closes against the strip.The damper blade and casing flanges are laser cut allowingfor precision fitting holes and accurate alignment ofthe shaft stubs.The shaft stubs are fitted with stuffing glands to sealagainst a pressure differential where necessary. The shaft stubs are bearing mounted and the non driven shaft can be fitted with limit switches. Standard sizes are available to match standard nominal bore ducting or pipe work but non-standard diameters can be manufactured to suit.This is particularly relevant where an existing damper needs to be replaced. Material of construction is mild steel. Stainless steel and high temperature versions with castable lining are available on request.

Butterfly Dampers are available as motorized, pneumatic or hand operated units. They can be supplied with accurate positioning actuators or as a simple open I closed configuration. The shaft stubs are bolted to the robust damper blade.This allows the flap to be replaced easily. Sealing strips are fitted to the damper casing and the damper blade closes against the strip.  The damper blade and casing flanges are laser cut allowingfor precision fitting holes and accurate alignment ofthe shaft stubs.The shaft stubs are fitted with stuffing glands to sealagainst a pressure differential where necessary. The shaft stubs are bearing mounted and the non driven shaft can be fitted with limit switches. Standard sizes are available to match standard nominal bore ducting or pipe work but non-standard diameters can be manufactured to suit.This is particularly relevant where an existing damper needs to be replaced. Material of construction is mild steel. Stainless steel and high temperature versions with castable lining are available on request.

Motorized Metal Seat Butterfly Valve, Manual Ball Valve (2 Pc

Industrial Butterfly Valves, HDPE Double Wall Electrical Corrugated Pipe

Sanitary Butterfly Valve

Butterfly Valve, Screwed End Gun Metal Balancing Valve

Triple-offset Butterfly Valves, Transair Fixing Clip

Butterfly Valve

solid cast stainless, wafer body

Mild Steel Butterfly Valve, Single Seated Globe Control Valve

Check Valves

Elbow Pipe Fittings, Globe Valves, pipe joint machine, Steel Pipes Fittings

Check Valves

Butterfly Double Eccentric / Offset Valves

bearing products