Wires Dealers in Sector 8, Noida

• Length: 11
• Material: Metal
• Handmade: Yes
• Supply Ability: 1000 Piece/Pieces per Week
• Height: 3
• Use: Home Decoration
• Place of Origin: Delhi, India
• Packaging Details: As Per Customer's Requirement
• Type: Candlestick Holder
• Port: New Delhi

XLPE Cables served by us are highly acclaimed in the market for their phenomenal workability. XLPE insulated cables or any others; you can rely on them in any tough conditions put before. Also, when it comes to rates, our XLPE insulated cables are available at the least prices than any other market. We are one of the major XLPE power cables manufacturers in India. BAJAJ-XR Cross Linked Polyethylene Power Cables (XLPE) Different types of cables in the voltage grade 1.1 to 33 kV are being used today in utilities and industries depending on their mechanical and electrical properti~s on one hand and economy in using them in the other. Among these, paper cables, ever since their introduction have been enjoying undisputed acceptability. However, the advent of XLPE cables in the late 70's marked the beginning of a gradual but steady replacement of paper cables especially for higher voltagE; applications. XLPE cables could command an immediate acceptance resulting from their ease of handling, moisture proof sheathing, easier jointing procedures and ease of maintenance. The XLPE range of cables offered by BAJAJ CABLES is known by its brand name BAJAJ-XR. BAJAJ-XR cables of 6.6 kV to 33 kV grade are manufactured as per Indian Standard 7098 (Part II) of 1985. PROPERTIES AND ADVANTAGES OF BAJAJ-XR CABLES The excellent thermal properties of BAJAJ-XR cables permit maximum continuous conductor operating temperature of 90.C and short circuit temperature of 250.e. Moreover, it has very low dielectric loss which does not vary much over the entire operating temperature range. These characteristics, alongwith the low dielectric constant make BAJAJ-XR cables particularly suitable for high voltage applications. Given below are additional outstanding features. High Continuous Current Rating: Its ability to withstand higher operating temperature of 90.C enables much higher current ratings than those of Pve. High Short Circuit Rating: Maximum allowable conductor temperature during short circuit of 250.C is considerably higher than for PVC cables resulting in greater short circuit withstand capacity. High Emergency Load Capacity: BAJAJ-XR cables can be operated even at 130.C during emergency, therefore in systems where cables are installed in parallel, failure of one of two cables will not bring down the system capacity because the remaining cables can carry the additional load even for longer duration until repairs/replacements are carries out. Low Dielectric Losses: BAJAJ-XR cables have low dielectric loss angle. The dielectric losses are quadratically dependent on the voltage. Moreover, these losses occur continuously in every charged cable whether it carries load or not. Hence use of XLPE cable at higher voltages would result in considerable saving in costs. Charging Currents: The charging current are considerably lower permitting dose setting of protection relays. Easy Laying and Installation: Low weight and small bending radii make laying and installation of cable very easy. The cable requires less supports due to low weight. High Safety: High safety against mechanical damage and vibrations. APPLICATIONS Because of the excellent mechanical and electrical properties BAJAJ-XR cables are being used extensively in all power stations and in industrial plants. They are ideally suited for chemical and fertilizer industries where cables are exposed to chemical corrosion or in heavy industries where severe load fluctuations occur and for systems where there are frequent over voltages. Cables can also be used at higher ambicol temperature on account of their higher operating temperature. Their excellent installation properties permit the cable to be used even under most difficult cable routing conditions and also in cramped conditions e.g. city distribution network. Single core cables due to their excellent installation properties are used in power stations, sub-stations and industrial plants with advantage. CONSTRUCTION BAJAJ-XR cables are manufactured and tested in accordance with 15:7098 (Part II) - 1985. Its salient constructional features are as under: Conductor: The conductors m,ade from electrical purity aluminium wires, are stranded together and compacted. All sizes of conductors of single or three core cables are circular in shape. Conductor construction and testing comply to IS: 8130 - 1984. Installation: High quality BAJAJ-XR (XLPE) unfilled insulating compound of natural colour is used for insulation. Insulation is applied by extrusion process and is chemically cross linked by continuous vulcanization process. Shielding: All BAJAJ-XR cables rated above 3.3 kV are provided with both conductor shielding and insulation shielding. Both conductor and insulation shielding consist of extruded semi-conducting compound. Additionally, insulation is provided with semi-conducting tape and non-magnetic metallic tape screen over the extruded insulation. Conductor shielding XLPE insulation and insulation shielding are all extruded in one operation by a special process. This process ensures perfect bonding of inner and outer shielding with insulation. Inner Sheath (Common Covering): In case of multicore cables, cores are stranded together with suitable non-hygroscopic fillers in the interstices and provided with common covering of plastic tape wrapping. As an alternative to wrapped inner sheath, extruded PVC inner sheath can also be provided. Armouring: Armouring is applied over the inner sheath and normally comprises of flat steel wires (strips) for multicore cables. Alternatively, round steel wire armouring can also be offered. Single core armoured cables are provided with non­ magnetic armour consisting of hard drawn flat or round aluminium wires. Outer Sheath: A tough outer sheath of heat resisting PVC compound is extruded over the armouring in case of armoured cables or over non-magnetic metallic tape covering the insulation or over the non-magnetic metallic part of insulation screening in case of unarmoured single core cables. This is always black in colour for the best resistance to outdoor exposure. The outer sheath is embossed the voltage grade and the year of manufacture. The embossing repeats every 300/350 rnrn along the length of the cable. TESTING AND QUALITY CONTROL BAJAJ-XR cables are manufactured under advanced manufacturing and testing facilities. The cables are type tested and routine tested in accordance with IS 7098. The following tests are carried out as routine tests on every length of cable manufactured: Conductor resistance test Partial discharge test High voltage test Test Voltages: Test voltages applied between conductors and screen/armour are shown below in Table.

For Solar application specially designed solar DC cables are used, Solar cable is the interconnection cable used in photovoltaic power generation. The cable is tested to last 25 years.

COAXIAL CABLE Premium & Supreme Series RG 11 / RG 6 / RG 59   Bare copper or copper clad steel Braiding 95% (60% for RG 59) Weather resistant PVC jacket Physical foaming Jelly filled

• Application: Good solderability both electrical and thermal conductivity
• Size:: 22 SWG
• Weight:: 250gm

• Brand Name: HPL
• Feature: High Tensile Strength, Quality Assured
• Specifications:: IS 694/1990
• Conductor material:: 100% Electrolytic Annealed Bare Copper As per IS:8130/1984
• Shape of conductor:: Flexible / Stranded / Solid
• Size of conductor in mm2:: 1.0 to 50 mm2
• No of strands / conductor:: As per IS 8130
• Maximum resistance of conductor at 20°C in Ώ / km:: As per table 1, 2 & 3 of IS 8130
• Number of Core:: 3 core
• Max. rated conductor Temperature:: 70° C for General purpose insulation & 85° for HR insulation
• Currents Rating :: As per IS: 3961 part 5, Table No -1, 2 & 6
• Max. temperature of conductor during short circuit:: 160° C
• Voltages grade:: Up to 1100 Volts
• PVC insulation compound:: Extruded Double layer Type A of IS:5831/1984
• PVC insulation thickness:: As per table 5/6 of IS 694
• Color of PVC insulation:: As per IS:694-1990, Table No. 7
• Standard length of wire coil :: 100/500/1000
• Ambient Temperature:: 40°C
• Approx reactance of cables ohm/km :: 50Hz
• PVC Sheathed compound for multicore cables:: Extruded, PVC Type ST1, FR, FR-LSH
• PVC Sheath thickness & tolerance:: As per table 5 / 6 of IS 694
• Color of Sheath:: Black & As per purchase required .
• max. Safe pulling force copper conductor :: 5.0 kg per Sqmm

• Application: Installation Of Cables
• Feature: Premium Quality, Rugged Proof
• Usage: Industrial
• Advantage: Easy to Operate
• Speciality: Rust resistance
• Strength: Long functional life

• Size: 1mtr
• Type: Computer Power Cables
• Application: Computer
• Color: Black
• Voltage: 110V, 220V
• Country of Origin: India
• Color: Black
• Material: Copper
• Usage/Application: For Computer,Laptop,Printer
• Cable Type: Power Cable
• Length: 1.5M

With our excellence in this field, we share forefront for supplying world-class array of products from Noida(India). We are backed by a modern transportation facility that ensures safe delivery of the orders at required destinations.

• Type: Electrical Cable

• Wire Gauge: 0-5, 5-10, 10-15
• Diameter: 1-3 mm
• Feature: Flexible
• Voltage: 300V
• Material: Rubber
• Size Range: 0.050 to 0.500mm
• Size: 2.5mm electrical cable wire

<p>Litz wire conductors are beneficial for reducing AC losses in high frequency windings. Parashar Vidyut udyog offers litz wire in many constructions with multiple layers of insulations to meet meet voltage withstand requirements. Litz wire is a bunch of several strands of enamelled copper wire. It&rsquo;s construction vary from a simple bunch of conductor or multiple cores laid up together.&nbsp;</p> <p>&nbsp;</p> <p>The Litz wire is designed to reduce the skin effect and proximity effect losses in conductor at high frequencies up to 1 MHz. Litz wires are typically used in HF transformers, HF inductors, electronic chokes, Toroidal coils, proximity switch, relays, Induction heating, induction, motors, sonar equipment, Inverters, power supply units, SMPS, ultrasonic generators, medical , sterlization equipment, AC-DC converters, Identification systems, magnetic loading, Hearing aids, repeating coils, deflexion yokes, fluorescent lamp ballast, solar inverters, wind power generators, UPS, Eximer Laser and in many other high frequency applications.</p> <p>&nbsp;</p> <p>Litz Wire sizes are generally expressed in abbreviated format i.e. N/XX, Where N equals the number of strands, and XX is the conductor diameter of each strands in SWG/AWG/mm. For example, a typical size of a Litz wire would be expressed as "90/46 SWG" or 90 strands of 46 SWG (0.061 mm).</p> <p>&nbsp;</p> <p>We have a range of Litz Wire and are manufactured from enamelled copper wires made up of high quality copper rods and modified polyurethane, polyesterimide wire enamels as basecoat and aromatie / polyamide as top coat. These are suitable for thermal class 155&deg;C to 240&deg;C. These wires have very good self-fluxing, solderability and high thermal properties.</p> <p>&nbsp;</p> <p>Litz wire are avialable in two forms Served or Unserved. Serving means that the bunched enamelled copper wire have a outer protective covering of one or two lapping of silk yarn, nylon, polyester, Cotton or Nomex (High temperature aramid). Typically serving is used to protect thin film insulation of the individual strands. The serving adds about 0.06 mm to the diameter of Litz Wire. The first lapping of serving is applied to the bunched wires in a direction opposite to the twist of the bunched wires. If a second lapping is to be applied it shall be in the opposite direction to the first lapping. The covering is uniform in quality and each lapping is even and uniform.</p> <p>&nbsp;</p> <p><strong>Reason of using Litz Wires in high frequency applications.</strong></p> <p>The DC (0 Hz) resistance of a conductor depends on its cross sectional area. A conductor with a larger area has a lower resistance. The resistance also depends on frequency because the effective cross section area changes with frequency. As frequency increases, conduction begins to move from an equal distribution through the conductor cross section toward existance almost exclusively near the surface. Depending on the conductor bulk resistivity at sufficiently high frequency all the RF current is flowing within a very small thickness at the surface. Furthermore the current concentrates nearest to the surface that abuts the highest relative dielectric contant. So round conductors such as wire or cables donot conduct much current near their axis, So the central material is not used effectively.</p> <p>&nbsp;</p> <p>One technique to improve the effeciency is to reduce amount of material that does not carry current by making the conductor of hollow tubing. The large surface area of the tube zonducts the current with much less resistance than a solid wire with the same cross sectional area would. The tank coils of high power radio transmitters are often made of copper tubing, silver plated on the ouside to reduce resistance.</p> <p>&nbsp;</p> <p>Litz wire is another method which employs a standard wire with individually insulated conductors (forming a bundle). Each thin conductor is less than a skin depth so an individual strand does not suffer a skin effect loss. The strands must be insulated from each other - otherwise all the wires in the bundle would short together, behaves like a single large wire, and still have skin effect problem. Furthermore the strands cannot occupy the same radial position in the bundle over long distances. The electromagnetic effect that cause the skin effect would still disrupt conduction. The weaving or twisting pattern of the wire in the bundle is designed so that the individual strands are on the ouside of the bundle for a distance and are inside for a distance. If each strand has a equally among every strand within the cable.</p> <p>&nbsp;</p> <p>In case of multiple wires or multiple turns, such as windings in transformers and inductors, the proximity effect causes losses to increase at high frequency even sooner and more rapidly than does skin effect. Proximity effect is the tendency for curent to flow in loops or concentrated distributions due to presence of magnetic fields generated by nearby conductors. In transformers and inductors, proximity effect losses are generally more significant than skin effect losses. In Litz Wire winding proximity effect may be subdivided in to internal proximity effect (the effect of other currents within the bundle) and outer proximity effect (the effect of the current in other bundles). The Litz wires are twisted or weaved just to ensure that the strand currents are equal. Where a simple bunched conductor wire can accomplish this adequately. Where skin effect would be a problem more complex Litz wire constructions can be used to ensure equal strand current.</p> <p>&nbsp;</p> <p>Litz wire is very effective below 500 KHz. It is rarely used above 2 MHz because at frequencies above 1 MHz the benefit becomes gradually offset by the capacitive build up between the strands. Litz wire has a higher impedance per unit cross sectional area but Litz Wire can be used at thicker cable sizes hence reducing or maintaiing cable impedance at higher frequeny.</p> <p>&nbsp;</p> <p><strong>Benefits of Litz Wire</strong></p> <ul> <li>Reduce A.C. Losses in high frequency winding.</li> <li>Increased Effeciency.</li> <li>Mitigation of Skin effect.</li> <li>Mitigation of Proximity Effect.</li> <li>Minimum Eddy Current losses.</li> <li>Lowered operating temperatures.</li> <li>Reduced footprint of final product.</li> <li>Substancial weight reduction.</li> <li>Avoidance of "Hot Spots".</li> </ul> <p>&nbsp;</p> <p><strong>Application of Litz Wire</strong></p> <ul> <li>High Frequency Transformers</li> <li>Toroidal Coils</li> <li>Stator Winding</li> <li>High Frequency Inductors</li> <li>Power Transformers</li> <li>Inverters</li> <li>Motor Generators</li> <li>Hybrid Transportation</li> <li>Wind Turbine Generators</li> <li>Communication Equipments</li> <li>Marine Acoustic Control Systems</li> <li>Induction Heating Equipments</li> <li>Sonar Equipments</li> <li>Radio Transmitter Equipments</li> <li>Switch Mode Power Supply</li> <li>Ultrasonic Equipments</li> <li>Linear Motors</li> <li>Sensors</li> <li>Antenas</li> <li>Grounding Applications</li> <li>Wireless Power Systems</li> <li>Electric Vehicle Chargers</li> <li>High Frequency Chokes</li> <li>High Frequency Motors</li> <li>Medical Sterlization Equipments</li> <li>Medical Device Chargers</li> <li>High Q Circuitry</li> <li>Tuning Circuitry in High Power Radio</li> <li>Flywheel Energy Storage</li> <li>Plasma Containment Coils</li> <li>Hearing Aids</li> <li>Relays</li> <li>Eximer Laser</li> <li>Welding Machine</li> </ul>

We are recognized as one of the most reliable manufacturer, supplier & exporter of Low Carbon HHB Wire used for making Horseshoe Nails & Bullock Shoe Nails.

• Material: Stainless Steel
• Application: Clinic, Hospital
• Color: White
• Feature: Easy To Fit

Product Details : Stainless steel  Guidewire. Available in J & Straight Tip. High Quality inner core wire for better strength. Available In 0.035” & 0.038” Length 60cm & 70cm. Preloaded  with Advancer. Individually packed & sterilized.

• Type: Insulation
• Size: 0.5, 0.75, 5x3, 5x8
• Power/Voltage: 600 V
• Conductor Resistance: 56.87 Max. To 2.43 Nom. Ohms/km At 20 Deg C
• Usage: Ac, Winding Of Motors, Coils, Transformer, Rotor, Premature,
• Frequency: 50 Hz

High quality insulated copper wire for stripping business Price : 175+ GST + Freight. MOQ : 5 TONS Ready stock upto 100 tons. Stripped millberry wire scrap 99% pure @ 410+GST+ Freight also available Payment terms : 100% RTGS .

• Brand Name: Kalinga Gold
• Wire Type: FR (Fire Retardant)
• Length: 90 m
• Core Material: Copper
• Voltage: 1100 V
• Number of Cores: Single Core
• Items in Pack: 1 Piece
• Size(Cross Sectional Area): 1.5 Sq mm
• Colour: Red

We are the well-known Suppliers of Bus Wires in the market. We offer the Bus Wires in different sizes as per customers� requirements. We procure the Bus Wires after stringent quality check to ensure superior quality. Owing to longer service life, durability and corrosion resistant properties, the Bus Wires are highly in demand among our customers. Appreciated For : DurabilityLonger service lifeCorrosion resistant propertiesHigh-grade packing

• Voltage: 12 V
• Brand Name: Siria Impex
• Material: Brass
• hickness: 0.25 mm
• Packaging Type: Box
• Packaging Size: 6 Rolls per Pack

PVC compound insulated single core and multi core flexible cables have a wide range of application in machine tools, appliances, control panels, machinery and industries of every nature. The conductors, drawn from 99.97% bright electrolytic grade copper with more than 100% conductivity, are annealed and bunched together. The conductors are insulated with a PVC compound with high insulation resistance and dielectric strength, formulated and manufactured in-house.In case of multicore cables, the insulated cores are laid up to form the core assembly. The inner cores are coded for ease of identification as per NationalInternational coding practices. The sheathing is provided with a specially formulated PVC compound to facilitate not only ease in stripping but also to withstand mechanical abrasion while in use. These PVC compounds used for insulation and sheathing have a high oxygen and temperature index. These properties help in restricting the spread of fire even at very high temperatures.

Compatible Brand: HT C,Apple i Phones,Samsung Type: Charge Length: 10 cm  Applicable Models: iPhone 5 is_customized:Yes Color: white Pattern: Swiss Army knife Advantage: Factory price Shipping: Free Shipping Great for transferring data and charging multiple devices in one go. Essential accessory in every CEO’s bag. Great branding area.

• Brand: KEI
• Spark Test: 8400 VDC
• Ambient Temperature: -40 Degree C to +90 Degree C
• Features: UV Resistance
• Core Material: Copper
• Insulation Material: PVC
• Elongation: 125%
• Shrinkage: 2 % at 120 Degree C
• Tensile Strength: 6.5 N/mm2
• Minimum Bending Radius: 6 x OD

• Features: High performance Premium quality Easy installation Safe to use

Brilltech is engaged in manufacturing and supplying comprehensive range of Copper Wires that are widely used for several electrical applications. It is manufactured using premium quality copper that enriches the strength and quality of wires. Being a leading organization, we check these industrial wires and cables on several parameters to provide safe and damage free products to customers. Further, these are well appreciated for its smooth finish, easy installation and accurate dimensions.

• Brand Name: Brilltech
• Model Number: 9818292266

Brilltech is increasing colossal notoriety in the business sector for the accessibility of the electrical wire.electricity voyages all the more effortlessly in profoundly conductive components like copper, silver or gold, the less conductive the material, the bigger the measurement must be to convey a similar current load.the brilltech group is fit and recognized to bargain in different electrical solutions for different electrical boards like medium and low voltage control boards, electrical transformers,electrical contractual workers alongside rising mains and transport bar trunking are additionally the part of the field of exercises by the group. the group is working world wide and africa, uganda, senegal, djibouti, cote d'ivoire, south africa, tunisia, ethiopia, burundi, seychelles, niger, sierra leone, botswana, cape verde, liberia, mozambique, morocco, mauritius, the gambia, central african republic, lesotho, eritrea, chad, madagascar, zimbabwe, mali, sao tome and principe, kenya, malawi, ivory coast (cote d'ivoire), benin, sudan, tanzania, rwanda, swaziland, cameroon, libya, gabon, mauritania, nigeria, guinea-bissau, zambia, ghana, equatorial guinea, comoros, burkina faso, algeria, namibia, angola, togo, guinea, somalia, middle east kuwait, egypt, syria, turkey, iran, lebanon, jordan, saudi arabia, united arab emirates, cyprus, oman, bahrain, qatar, iraq, yemen, israel, and so forth clients are engaged to this inventive worth driven organization, which offers and appropriates electrical products and services to clients around the world. Features of electrical wires: -light weight -moderately high conductivity -heat resistance -great windings

Owing to our advanced machinery, which is operated by trained technicians, we manufacture quality Cold Rolled Ribbed Wire Cold Rolled Ribbed Wire - Straight length upto 12 mtrs. Cold Rolled Ribbed Wire - Coil form upto 1000 kgs.

• Color: Black, Green, Red, White, Yellow
• Application: Home, Industrial
• Outer Material: Neoprene Rubber, Rubber, Silicone Rubber
• Internal Material: Copper

Owing to our advanced machinery, which is operated by trained technicians, we manufacture quality Cold Rolled Ribbed Wire.

GEEKORE is a leading company engaged in manufacturing high quality wires and cables. Incorporated in 1991, GEEKORE has passed its successful 19 years with enjoying its business with many of reputed OEMs and PSUs in the area of power transmission, electronics, military, defence and communication. We believe in technical competency and supplying consistent quality products to our end customers. We have two manufacturing units in Noida with plenty of space, efficient manufacturing and testing facilities.

Armored Waterproof Cable, KOC Polishing Films, lc connector, pc connector

• Material: Stranded Annealed Bare Copper Conductor
• Features: Heavily Braided with HDPE Insulation
• Diameter: 1.35 ± 0.1 mm
• Cable Length: 90 Mtrs.