Zoren Hops India Private Limited Sector 16, Noida, Uttar Pradesh

Control system is SIEMENS. There is sensor on the ruler start the motor automatic. There is manual and automatic two job pattern.

It is used to fill insert gas into insulating glass to make the insulating glass better hot and cold air resistance, improve quality of insulating glass.

It may rotate freely at 360 ° It can be controlled by the pedal valve with convenience control, rotates freely and stops angle. The table can be adjusted up and down.

This machine is controlled by the man-machine interface with English language. Power system is controlled with hydraulic station, overflow valve is of Japanese, and selector valve is Taiwan, South Korea sensor. This machine is equipped with hydraulic accumulator system; its pressure for coating is more stable and longer the lifetime of machine. Coating speed of this machine is 8–38 m/ minute, its speed can adjust to change, it is very convenient to running and very stable. The specialized flat nozzle design makes butyl attached on the aluminium spacer more beautiful and saves about 40% butyl per M2. Special vertical structure, take PTFE sealing into use: hot air will come out upside that ensure the butyl coated not be disconnected.

Voltage: 380V 50HZ Powder: 0.18 KW Air pressure: 0.6 Mpa Each rotary angle: 90° Dimension: 1100*1100*750mm

It is pneumatic driving machine. Base material supply system and curing agent supply system Using special high-pressure Piston pump, two-way equivalent feeding for the silicon, accompanied by pressurized feed Pressure plate, and fully guarantee pumping high viscosity fluid filled, to prevent mixing of air to ensure stable medium output. Pneumatic lifting mechanism to replace the materials quickly and easily. Compounding System Adoption of Synchronous linkage with adjustable ratio booster system. The ratio of material to adapt to different mixing requirements (6:1-14:1). With special mixing ratio testing system and convenient to adjust the mixing ratio, the ratio tolerance is less than ±2% Mixer--Adoption of static reciprocating tube mixer. Small size and light weight. Imports mixed core to mix more evenly durable and reliable, the domestic unique needle and one-way valve to Ensure that mixing material does not return and to avoid pipe freezing. Silicon extruding system-Adoption of import glue gun, the operation is extremely simple. After the first time adjustment of gas pressure, almost no any other operation. Feeing, matching, mixing and spraying in one process. just gently pull each time (release) gun trigger, you can immediately start the whole system (off). Sensitive high-pressure protection valve (imported) to make the operation easier. The parts contact the fluid is all made of high quality stainless steel. Seal rings use imported high-quality Teflon material which is reliable and durable. Perfect service and spare parts supply so that you can use it without worry. The system is pure air, no electricity, no hydraulic, easy to adjust, simple and safe operation. The system adopts the most advanced technology and production processes, the ratio of precision (± 2%), and mix well. Optional electric heat insulation device in order to adapt to temperature changes.

Press machine European Technology, Schneider electric control part. PLC PANASONIC, PANASONIC transducer, WENVIEW monitor from Taiwan, sensor Omron from Japan. The main electric parts can run more than 50, 00,000 times. Its automatic running realize transportation ,speed up – press glass --- two or three pieces of glass & different sizes of glass .it adjust the size of different glass by servo motor, it is high auto and more exact running. The press part can open and go side to install and maintain the machine the front box is vaccume; the back box is pneumatic driving. It can deal with two or three pieces of glass and curtain walls. Any angle When press it is control by mechanical hand (mechanical position & suck part from Taiwan), all this make the press right position will not dislocation. The speed is 45 M per minute and it has glass waiting process, its high effect ion will produce 1000 pieces of glass in 8 hours. The frame is welding from 2.75 mm international rectangular pipe, high strength of frame and it will not change the shape. Washing and drying machine The washing part and drying part are made of stainless steel, it is high strength and shape will not change; the top parts made from 12mm thick stainless steel; the bottom is made from 5mm thick stainless steel, the lateral is made from 2mm thick stainless steel. OMRON recognization system for low – E glass, it can know if it is the coating side of the low-E glass. If it is Low-E glass the hard brushes will apart avoid damaging the coating of glass. Six anti-temperature brushes, diameter is 180 mm. four sprayers, high speed, glass washing clean, speed is about 10-12m per minute. The spring is stainless steel and can adjust 3-20 mm for different thickness of glass. Any angle All part contact water include the axle in the washing machine is stainless steel, copper or waterproof aluminium, nylon and so on, it will not rust for long time running ,and easy to maintain. Dear driving system takes chain reaction so it will not leave the original position after long time running. Drying part frame is stainless steel will not dirty the glass second time, the circle wind also down the noise. The circle hot wind down the noise comes from the machine (in winter the hot wind temperature can reach 40 even no heating). Parameter Voltage:380V/50HZ Power: 24.5 KW Max.size of original glass: 2500*35000 Min.size of original glass: 400*280mm Thickness of original glass: 3-18 mm Working speed: 8-48 m/min Thickness of insulating glass: 55mm Weight: 7200kgs

Press machine European Technology, Schneider electric control part. PLC PANASONIC, PANASONIC transducer, WENVIEW monitor from Taiwan, sensor Omron from Japan. The main electric parts can run more than 50, 00,000 times. Its automatic running realize transportation ,speed up – press glass --- two or three pieces of glass & different sizes of glass .it adjust the size of different glass by servo motor, it is high auto and more exact running. The press part can open and go side to install and maintain the machine the front box is vaccume; the back box is pneumatic driving. It can deal with two or three pieces of glass and curtain walls. When press it is control by mechanical hand (mechanical position & suck part from Taiwan), all this make the press right position will not dislocation. When press the glass will leave the transportation roller to do in this way it will longer the life time of transportation roller and will not break the glass. The speed is 45 M per minute and it has glass waiting process, its high effect ion will produce 1000 pieces of glass in 8 hours. The frame is welding from 2.75 mm international rectangular pipe, high strength of frame and it will not change the shape. Washing and drying machine The washing part and drying part are made of stainless steel, it is high strength and shape will not change; the top parts made from 12mm thick stainless steel; the bottom is made from 5mm thick stainless steel, the lateral is made from 2mm thick stainless steel. OMRON recognization system for low – E glass, it can know if it is the coating side of the low-E glass. If it is Low-E glass the hard brushes will apart avoid damaging the coating of glass. Six anti-temperature brushes, diameter is 180 mm. four sprayers, high speed, glass washing clean, speed is about 10-12m per minute. The spring is stainless steel and can adjust 3-20 mm for different thickness of glass. Any angle All part contact water include the axle in the washing machine is stainless steel, copper or waterproof aluminium, nylon and so on, it will not rust for long time running ,and easy to maintain. Dear driving system takes chain reaction so it will not leave the original position after long time running. Drying part frame is stainless steel will not dirty the glass second time, the circle wind also down the noise. The circle hot wind down the noise comes from the machine (in winter the hot wind temperature can reach 40 even no heating). Parameter Voltage:380V/50HZ Power: 21.5 KW Max.size of original glass: 2200*3000mm Min.size of original glass: 400*280mm Thickness of original glass: 3-18 mm Thickness of insulating glass: 55mm Work speed: 8-48 m/minise. Weight: 7000kgs

Color : green

Types of doors: A. For Casement Windows Door Handles Door Locks Cylinder for Locks Butt Hinges 3-D Hinge B. For Sliding Windows Multi Point Locking System Single Point Locking System Rollers Bum Stopper