Die Steel Dealers

We offer Flat Rounds Die Steels. H13 with duly ground and machined as per customer requirement. All material available as per customer request with TC report. Length: 100mm-10000mm Round Dia: 16mm-600mm, square bar.25-300mm, blocks sizes up to 400*400mm. Delivery: Fast delivery service. Test: Ultrasonic test according to customer requirement Material details will be as per agreed technical specifications We are proud to introduce ourselves as one of the prominent suppliers of a qualitative assortment of Die Steel Rods. Our products are procured from trustworthy vendors, these Die Steel Rods are manufactured from finest quality components and by implementing advance technologies. One can avail these rods in various standard thickness and sizes following their requirements. These are available at affordable rates.

• Application: Crockery And Construction
• Shape: Round
• Material: Die Steel
• Grade: H-11,H-12,H-13
• Surface Finishing: Powder Coated

• Shape: Round
• Length: 1-1000mm,2-5.8 m
• Color: Silver
• Finishing: Polished
• Dimension: 10-100mm

• Type: Hot Die Steel
• Material: Alloy Steel, Stainless Steel
• Shape: Round
• Application: Hot Die Steel (
• Brand Name: musco
• Grade: h13

We are offering h-13 hot die steel, musco , gloria, ravne make imported bright.

We are counted amongst the foremost providers of Tool Steel and Die Steel such as EN 31, SAE 52100,

• Type: Forging
• Certification: ISI Certified
• Application: Industrial Use
• Color: Grey
• Surface Finishing: Polished
• Die Depth: 0-15mm

Forging Die Steel is nickel hot work tool steel with good hardenability. uniform hardness over section also at great dimensions . Resistance under impact loadings. Very good strength and toughness. Good tempering resistance and dimensional stability. Tools can be water or air cooled.   Application Forging tools, dies of all sorts, shapes and sizes, hot forging and pressing tools for steel and metal. Moulds, bushings, piercers etc. Blocks for dies, hammers and pile drivers, rams of power hammers, hot mill rolls, very hard, cold work dies and punches.   Physical properties (avarage values) at ambient temperature : Modulus of elasticity [103 x N/mm2]: 215 Density [g/cm3]: 7.84 Thermal conductivity [W/m.K]: 36.0 Electric resistivity [Ohm mm2/m]: 0.30 Specific heat capacity[J/g.K]: 0.46 Hot forming temperature: 1050-850oC. Machinability : The machinability rating of D3 is roughly 25 % that of free machining carbon steel 1018. Due to its abrasion resistant nature, machining in the hardened condition should be limited to finish grinding.

We are the leading manufacturers, suppliers and exporters of Die Steel based in Mumbai, Maharashtra. Our Die Steel offers prominent features like corrosion and abrasion resistance, longer efficiency and durable make. The raw materials for its manufacturing are supplied by the most reliable vendors. This quality of the steel has the best physical and chemical properties amongst all other available options. We deliver the quality checked products at the most competitive prices.   Features: Durable make Resistant to corrosion and abrasion Longer functional life

• Type: Hot Die Steel
• Material: Stainless Steel
• Shape: Flat, Rectangular
• Application: Hot Die Steel (
• Color: Black, Silver
• Finishing: Polished
• Country of Origin: India

Leading Wholesale Trader of Hot Die Steel, Die Steel Round, Hot Die Steel H21 Round, Hot Die Steel H11 Round, Hot Die Steel H11 Flat and Hot Die Steel H11 Square from Mumbai

We stand tall as the celebrated Manufacturer, exporter and Supplier of Die Steel (D2). The Die Steel (D2), we offer, is fabricated in compliance with the laid industry norms and standards. High compressive strength, dimensional accuracy, abrasion & corrosion resistance and smooth finish are the highlights of our D2 Die Steel. We make available the Die Steel (D2) in different specifications to meet the varied requirements of buyers.Details : We being a presumed maker of D2 Die Steel offer the customers a various scope of pass on steel rounds & pads, which is accessible in different determinations With the assistance of our merchants, we give tweaked arrangement Features : Hostile to destructive Longer utilitarian life Powerful plan

• Type: Hot Die Steel
• Material: Alloy Steel, Carbon Steel, Mild Steel
• Shape: Flat, Hexagonal, Round, Square
• Color: Black
• Country of Origin: India

We supply WPS Die Steel in various grades like W1, W2, W5, W4 etc in shapes like Rods, Flats, Sheets, Patta, wires etc in various sizes.

This MatWeb entry has typical values for specimens of unknown formheat treatment but appear to be annealed samples. We are creating other entries for more specific heat treatments and forms. Austenitic Cr-Ni stainless steel. Better corrosion resistance than Type 302. High ductility, excellent drawing, forming, and spinning properties. Essentially non-magnetic, becomes slightly magnetic when cold worked. Low carbon content means less carbide precipitation in the heat-affected zone during welding and a lower susceptibility to intergranular corrosion. beer kegs, bellows, chemical equipment, coal hopper linings, cooking equipment, cooling coils, cryogenic vessels, dairy equipment, evaporators, flatware utensils, feedwater tubing, flexible metal hose, food processing equipment, hospital surgical equipment, hypodermic needles, kitchen sinks, marine equipment and fasteners, nuclear vessels, oil well filter screens, refrigeration equipment, paper industry, pots and pans, pressure vessels, sanitary fittings, valves, shipping drums, spinning, still tubes, textile dyeing equipment, tubing.

Our products are manufactured under the guidance and supervision of quality experts as we make sure that they remain defect free. Assistance of a sophisticated packaging system and professional packing team, we have become capable of meeting the exact requirements of the clients. In addition, we ensure zero damage at buyer's end.

• Country of Origin: India
• Type: Hot Die Steel
• Material: Alloy Steel
• Shape: Flat, Rectangular
• Length: 1-1000mm, 1000-2000mm, 2000-3000mm, 3000-4000mm, 4000-5000mm
• Finishing: Non Poilshed
• Dimension: 10-100mm, 100-200mm, 20-300mm, 300-400mm, 400-500mm, 500-600mm, 600-700mm, 700-800mm, 800-900mm, 900-*1000mm

Tool and die steels are high carbon steels (either carbon or alloy) possessing high hardness, strength and wear resistance. Tool steels are heat treatable. Designation system of one-letter in combination with a number is accepted for tool steels.

Dapping Die Steel Code  294A Sizes Dapping Die Steel with 2 wooden  punches

H-21 is 9% Tungsten hot work tool steel. H-211.2581 Work tool Steel was developed to extend the life of aluminum die cast moulds. Used for hot-working dies and tooling such as die casting, extrusion and hot forming of parts. This alloy is one of the Hot Work, tungsten containing tool steels. The tungsten content is beneficial for hot strength at red heat, although toughness is somewhat reduced. Applications : Tools for metal tubes & rods, extrusion. Presses, rams, forging dies etc. Sizes Available : Rounds. Dia and Length are as per clients request.

The company is a widely acclaimed Supplier of Die Steel in New Delhi. The range of Die Steel, offered by the company, can be availed as per the specific requirements at the market leading prices. Meeting the bulk and specific client needs, the company is widely appreciated for delivering the best quality Die Steel. Specialties of Die Steel High tensile strengthCorrosion resistantDimensional precisionSturdy construction

• Type: Cold Working Tool Steels
• Material: Carbon Steel
• Thickness: 0.5-1mm, 1-3mm, 3-5mm
• Certification: ISO-9001:2008
• Length: 1-20 Feet, 20-40 Feet, 40-60 Feet, 60-80 Feet
• Application: Automobile Industry
• Width: 1-100mm, 100-500mm, 1000-5000mm, 500-1000mm
• Standard: AISI, ASTM, EN, GB

various properties of cold work steels make them perfect for manufacturing a variety of products such as cutting and pressing tools, cavity moulds, knives, hobbing and drawing tools, cavity-sinking punches, flat and circular thread-rolling dies, and much more. Having all such properties like high surface hardness, good toughness and compressive strength, high wear resistance the cold work steel that we offer is highly demanded. Tool & die steel is one of major strengths, we are a leading importer - exporter - stockist of these steel products. We offer wide range of sizes for this steel.suited for cutting dies heavy duty cutting and punching tools milling cutters reamers calipers tapping dies measuring tools

• Application: Construction
• Material: Stainless Steel
• Brand Name: Seven Star
• Thickness: 132-460 mm

We are the leading manufacturers, exporters and supplier of this products.