Air Pack Solutions Pinjore, Panchkula, Haryana

Weighing Booth Extractor is designed specifically for powder containment applications, the Powder weighing enclosure employs carefully directed inward airflow at the face of the enclosure to hazardous powders or potent pharmaceutical compounds. The aerodynamically designed enclosure reduces airflow turbulence for maximum containment while minimizing the effect that air drafts may have on sensitive weighing balances. The enclosure design exceeds the containment requirements of proven by independent type testing. All exhaust air is HEPA-filtered, removing virtually all particulate matter, before recirculation to the laboratory. weighing booth extractor Unitis with a variety of standard dimensions also our cabinet can be custom engineered to any size. Weighing Booth Extractor available in powder coated Mild Steel, SS 304 / 316 / 316L or a combination of both.

Vertical Laminar Flow Unit is designed specifically for product protection. The Cabinet is a clean bench which provides ultra clean sterile HEPA filtered class 100 air in an isolated area for operations requiring a particulate-free environment where the highly sensitive process activities are carried-out. The Vertical laminar air Flow Unit draws air in through the top of the unit through a pre-filter, through a plenum and vertically down over the work-surface and past the lap of the operator. It has the advantage of not pushing air into the face of the operator as in a horizontal laminar air flow cabinet. The laminar air flow cabinets are used for work with low-risk substances and materials, when protection of working material from environment is required or work with item requires a sterile working zone. Cabinets are used for equipment of local workplaces in medical, pharmaceutical and other institutes with high requirements for air cleanliness in the working zone. Vertical Laminar Air Flow Unit is with a variety of standard dimensions also our unit can be custom engineered to any size. Laminar air flow available in powder coated Mild Steel, SS 304 / 316 / 316L or a combination of both. Technical Specification : Supply filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% down to 0.3µ Pre-filter : Pre-filter are made from non-woven synthetic with HDPE mesh; conforms to EU 6 grade, with an efficiency rating better than 95% down to 5µ. MotorAlower Assembly : Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA. Differential Pressure Gauge : Dwyer make magnehelic Gauge (0 -25 mm: 1 No.) to monitor pressure drop across HEPA. s Lighting : Fluorescent light with milky white diffuser (250 Lux) at work surface ON/OFF Switches : SS ON/OFF switches for motor & lights Switch Socket : 6/15 amp single-phase switch socket use for external equipment Work Table : SS work table with due reinforcement Side Panel : Glass side panel screens for maximum visibility DOP Port : DOP test port at upstream of HEPA filter to personnel for carrying out the HEPA filter integrity test (with PAO solution).. Switch Socket : 6/15 amp single-phase switch socket use for external equipment DOP Port : DOP test port at upstream of HEPA filter to personnel for carrying out the HEPA filter integrity test (with PAO solution). Electrical Supply : 230V AC 1- Ø 50HZ / 415V AC 3-Ø 50HZ Noise Level : Less than 67 dB on Scale ‘A’ when ambient is not greater than 55 dB on scale ‘A’ Vibration Level : Minimum Optional Accessories : U.V. Light with hour meter. SS 304 cock for gas and air. Foldable polycarbonate front door. Audio visual alarm indicating condition of HEPA filters. Clean down timer with operation hold indicator. VFD based control systems. Photohelic guage / Digital pressure gauge to monitor of pressure drop across filter. Sodium vaporlamps. Flame proof fitting.

Unidirectional Air Flow Benches offers highest product protection for samples and processes by providing ISO Class 5 particle free work area. Unidirectional Air Flow Unit draws air in through the top of the unit through a pre-filter, through a plenum and vertically down over the work-surface and past the lap of the operator. It has the advantage of not pushing air into the face of the operator as in a vertical laminar flow cabinet. It prevents contamination from operator and environment to work area. The laminarity of the flow prevents cross contamination between the items handled in the working space. These units are suitable for the handling of non-hazardous products, sensible to dust and/or to contamination wherever operator protection is not required. Unidirectional Air Flow Units with a variety of standard dimensions also our cabinet can be custom engineered to any size. Unidirectional air flow are available in powderTechnical Specification : Supply filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% down to 0.3µ. Pre-filter : Fresh Air filter are made from non-woven synthetic with HDPE mesh; conforms to EU 6 grade, with an efficiency rating better than 95% down to 5µ. MotorAlower Assembly : Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA. Differential Pressure Gauge : Dwyer Make Magnehelic Gauge (0 -25 mm: 1 No.) to monitor pressure drop across HEPA. Lighting : Fluorescent light (250 Lux) at work surface ON/OFF Switches : SS ON/OFF switches for motor & lights Switch Socket : 6/15 amp single-phase switch socket use for external equipment Control Panel : Electrical control panel mounted on the side panel of the unit. DOP Port : DOP test port at upstream of HEPA filter to personnel for carrying out the HEPA filter integrity test. Side Panel : Double skin side panels with glass view panel Electrical Supply: : 230V AC 1Ø 50Hz / 415V AC 3Ø Hz Noise Level : Less than 67 dB on scale ‘A’ when ambient is not greater than 55 dB on scale ‘A’ Vibration Level : Minimum Optional Accessories : Front Anti-static PVC Curtains Audio visual alarm indicating condition of HEPA filters Clean down timer with operation hold indicator VFD based control systems Photohelicguage / Digital pressure gauge to monitor of pressure drop across filter. Sodium vaporlamps Flame proof fitting     coated Mild Steel, SS 304 / 316 / 316L or a combination of both.

Static Pass Boxes | Ventilated Pass Box is widely used for transferring the material from and into the clean room, without contaminating the air of clean room & without having to open room door. These cleanroom pass boxes can be installed on the wall between the clean room and other room. Our range of static pass boxes is available in various specifications as per the client’s requirements. Static Pass Box | Ventilated Pass Box is with a variety of standard dimensions also our pass boxes can be custom engineered to any size. Static Pass Boxes | Ventilated Pass Box are available in powder coated Mild Steel, SS 304 / 316 / 316L or a combination of both.Standard Model Available  Door : SS 304 double walled door construction with flush glass view panels with SS handles and SS hinges. Interlocking : Electro-Magnetic Interlocking type door arrangement to ensure that only one side door can be opened at any given time. Door Indication : Indicators on either side for door open condition. Door release : Door release Switch on either side. SS coving : Internal covings for easy cleaning. Optional Accessories : U.V. Light with Hour Meter used for bacteria/virus killing & interlocking arrangement to put off UV Light if either side door opens. Support stand for mounting of pass box. Flange for sealing the gap between the pass box and the clean room wall. Electro-Magnetic / Mechanical Interlocking. Floor mounted construction with three side wall structure & Door drop seal. Provision for ventilation with perforated grills. Flameproof fitting.   Documentation :All necessary documents will be provided as per the latest prevailing standards.

Laminar Air Flow is designed to provide Class 100 working environment at rest with built in scavenging system to ensure product, operator as well as surrounding environment protection. The Reverse Laminar Airflow Bench finds a major application in sampling and dispensing. Majorly used for mixed airflow stream to control the hazardous emission of dust powder during dispensing or sampling process. This ensures to draw powder aerosols away from the operator and the operating environment protecting products and providing safe working conditions for personnel. Reverse Laminar Air Flow Unit operates on a re-circulatory airflow principle providing containment by air movement. The pre-filters at the base of the rear wall capture the airborne contaminants generated. Intake velocity at pre-filters increases to ensure scavenging effect. A small percentage of air is discharged from the booth through the bleed exhaust HEPA filter to maintain the working space under negative pressure. Reverse Laminar Air Flow Unit is with a variety of standard dimensions also our cabinet can be custom engineered to any size. Reverse Laminar air flow are available in powder coated Mild Steel, SS 304 / 316 / 316L or a combination of both. Technical Specification : Supply filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% down to 0.3µ. ExhaustHEPA filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at exhaust position with an efficiency rating better than 99.999% for 0.3µ. Intermediate Filter : Intermediate filter are made from non-woven synthetic with HDPE mesh; conforms to EU 7 Grade, with an efficiency rating better than 95% down to 3µ. Pre-filter : Pre-filter are made from non-woven synthetic with HDPE mesh; conforms to EU 4 Grade, with an efficiency rating better than 90% down to 10µ. MotorBlower Assembly : Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA. Differential Pressure Gauge : Dwyer Make Magnehelic Gauge (0 -25 mm: 2 Nos.) to monitor pressure drop across HEPA & Intermediate filter and (0-10 mm 1 No.) across prefilter. Lighting : Fluorescent light (250 Lux) at work surface ON/OFF Switches : SS ON/OFF switches for motor & lights Switch Socket : 6/15 amp single-phase switch socket use for external equipment Control Panel : Electrical control panel mounted on the side panel of the unit. DOP Port : DOP test port at upstream of HEPA filter to personnel for carrying out the HEPA filter integrity test (with PAO Solution). Side Panel : SS 304 Double Walled Side Panels. Electrical Supply : 230V AC 1- Ø 50HZ / 415V AC 3-Ø 50HZ Noise Level : Less than 67 dB on scale ‘A’ when ambient is not greater than 55 dB on scale ‘A’ Vibration Level : Minimum Optional Accessories : Front Anti-static PVC Curtains Audio visual alarm indicating condition of HEPA filters Clean down timer with operation hold indicator VFD based control systems Photohelicguage / Digital pressure gauge to monitor of pressure drop across filter. Sodium vaporlamps Flame proof fitting Safe change bag in / bag out arrangement for filters Double skin side panels with view windows Service access from front / back / side Horizontal internal coving at base

Mobile Trolley is designed for transporting sterile products under ISO Class 5 (Class 100) particle free work area for storing sterile products to meet storage needs while making a positive contribution to maintaining the cleanliness of your controlled cleanroom environment. The work area is continuously supplied with positive pressure HEPA filtered recirculated vertical / horizontal air flow. Our range of mobile trolley cabinet is available in various specifications as per the client’s requirements.Mobile Trolleyis with a variety of standard dimensions also our Mobile Trolley can be custom engineered to any size. Mobile Trolley is available in powder coated Mild Steel, SS 304 / 316 / 316L or a combination of both. Technical Specification : Supply filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% down to 0.3µ. Return Air Pre-filter : Return Air Pre-filter are made from non-woven synthetic with HDPE mesh; conforms to EU 6 grade, with an efficiency rating better than 95% down to 5µ. Fresh Air Filter : Fresh Air Pre-filter are made from non-woven synthetic with HDPE mesh; conforms to EU 4 Grade, with an efficiency rating better than 90% down to 10µ. Motor Alower Assembly : Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA. Differential Pressure Gauge : Dwyer Make Magnehelic Gauge (0 -25 mm: 1 No.) to monitor pressure drop across HEPA. Door : SS 304 double walled door construction with flush glass view panels with SS handles and SS hinges. Interlocking : Electro-Magnetic interlocking arrangement to put-off UV Light if either side door opens. Shelves : SS 304 hanging arrangement (or) removable type shelves Temperature Control : Heater with thermostat for control of temperature in cabinet Battery back-up : Battery back-up with inverter for 30 mins Castrol wheel : PU coated lockable castor wheels ON/OFF Switches : SS ON/OFF switches for motor & lights Switch Socket : 6/15 amp single-phase switch socket use for external equipment DOP Port : DOP test port at upstream of HEPA filter to personnel for carrying out the HEPA filter integrity test. Handle : SS 304 Handle for mobility Electrical Supply : 230V AC 1- Ø 50HZ / 415V AC 3-Ø 50HZ Noise Level : Less than 67 dB on scale ‘A’ when ambient is not greater than 55 dB on scale ‘A’ Vibration Level : Minimum Optional Accessories : U.V. Light with Hour Meter used for bacteria/virus killing & interlocking arrangement to put off UV Light if either side door opens. Electro-Magnetic / Mechanical Interlocking Audio visual alarm indicating condition of HEPA filters Clean down timer with operation hold indicator VFD based control systems Photohelicguage / Digital pressure gauge to monitor of pressure drop across filter. Sodium vaporlamps Flame proof fitting

Mobile Laminar Air Flow Unit is designed for transporting sterile products under ISO Class 5 (Class 100) particle free work area to ensure product integrity. The work area is continuously supplied with positive pressure HEPA filtered recirculated horizontal air flow. Mobile Laminar Air Flow Unit is with a variety of standard dimensions also our cabinet can be custom engineered to any size. Mobile Laminar air flow available in powder coated Mild Steel, SS 304 / 316 / 316L or a combination of both.echnical Specification : Supply filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% down to 0.3µ. Pre-filter : Pre-filter are made from non-woven synthetic with HDPE mesh; conforms to EU 6 grade, with an efficiency rating better than 95% down to 5µ. MotorBlower Assembly : Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA. Differential Pressure Gauge : Dwyer Make Magnehelic Gauge (0 -25 mm: 1 No.) to monitor pressure drop across HEPA. Lighting : Fluorescent light with milky white diffuser (250 Lux) at work surface ON/OFF Switches : SS ON/OFF switches for motor & lights Switch Socket : 6/15 amp single-phase switch socket use for external equipment Control Panel : Electrical control panel mounted in the unit. DOP Port : DOP test port at upstream of HEPA filter to personnel for carrying out the HEPA filter integrity test with (PAO) solution. Battery back-up : Battery back-up with inverter for 30 mins Handel : SS 304 handle for mobility Castrol wheel : PU coated lockable castor wheels Electrical Supply : 230V AC 1- Ø 50HZ / 415V AC 3-Ø 50HZ Noise Level : Less than 67 dB on scale ‘A’ when ambient is not greater than 55 dB on scale ‘A’ Vibration Level : Minimum Optional Accessories : Anti-static PVC strip overlapping curtains Audio visual alarm indicating condition of HEPA filters Clean down timer with operation hold indicator VFD based control systems Photohelicguage / Digital pressure gauge to monitor of pressure drop across filter. Sodium vaporlamps Flame proof fitting

The Horizontal Laminar Flow workstation is designed specifically for highest product protection by providing ISO Class 5 particle free work area for handling critical process. The main HEPA filter is situated immediately behind the working area; clean air is then blown across the work surface towards the operator. The work area is continuously supplied with positive pressure HEPA filtered horizontal air flow. It prevents contamination from operator and environment to work area. The laminarity of the flow prevents cross contamination between the items handled in the working space. These units are suitable for the handling of non-hazardous products, sensible to dust and/or to contamination wherever operator protection is not required. Horizontal Laminar Air Flow Unit is with a variety of standard dimensions also our cabinet can be custom engineered to any size. Horizontal Laminar air flow are available in powder coated Mild Steel, SS 304 / 316 / 316L or a combination of both. Technical Specification : Supply filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% down to 0.3µ. Pre-filter : Made from non-woven synthetic with HDPE mesh; conforms to EU 6 grade, with an efficiency rating better than 95% down to 5µ. MotorAlower Assembly : Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA. Differential Pressure Gauge : Dwyer Make Magnehelic Gauge (0 -25 mm: 1 No.) to monitor pressure drop across HEPA. Lighting : Fluorescent light with milky white diffuser (250 Lux) at work surface ON/OFF Switches : SS ON/OFF switches for motor & lights Switch Socket : 6/15 amp single-phase switch socket use for external equipment Work Table : SS work table with due reinforcement Side Panel : Glass side panel screens for maximum visibility DOP Port : DOP test port at upstream of HEPA filter to personnel for carrying out the HEPA filter integrity test. Electrical Supply : 230V AC 1- Ø 50HZ / 415V AC 3-Ø 50HZ Noise Level : Less than 67 dB on scale ‘A’ when ambient is not greater than 55 dB on scale ‘A’ Vibration Level : Minimum Optional Accessories : U.V. Light with hour meter SS 304 cock for gas and air Foldable polycarbonate front door Audio visual alarm indicating condition of HEPA filters Clean down timer with operation hold indicator VFD based control systems Photohelic guage / Digital pressure gauge to monitor of pressure drop across filter. Sodium vaporlamps Flame proof fitting

We have manufacturing of all type (Standard and non standard) of ss furniture as per cGMP

Garment Storage Cabinet is designed to provide ISO Class 5 (Class 100) particle free work area for storing sterile packed garments to meet garment storage needs while making a positive contribution to maintaining the cleanliness of your controlled cleanroom environment. Cleanroom garments can accumulate particulate contamination during storage and between laundry washes, which in turn may lead to lower product yields and increased product quality issues. The work area is continuously supplied with positive pressure HEPA filtered re-circulated vertical / horizontal air flow. These are widely used for storage of clean apparel for clean rooms as these are equipped with HEPA filter and U.V. germicidal tube. Therefore, these are safe and ensure that the garments completely free from bacterial contamination. Our range of Garment Storage Cabinet is available in various specifications as per the client’s requirements. Garment Storage Cabinet is with a variety of standard dimensions also our Garment Cabinet can be custom engineered to any size. Garment Storage Cabinet available in powder coatedMild Steel, SS 304 / 316 / 316L or a combination of both. :Technical Specification : Supply filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% down to 0.3µ. ReturnAir Pre-filter : Return Air Pre-filter are made from non-woven synthetic with HDPE mesh; conforms to EU 6 grade, with an efficiency rating better than 95% down to 5µ. FreshAir Filter : Fresh Air Filter Made from non-woven synthetic with HDPE mesh; conforms to EU 4 Grade, with an efficiency rating better than 90% down to 10µ. MotorAlower Assembly : Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA. Differential Pressure Gauge : Dwyer Make Magnehelic Gauge (0 -25 mm: 1 No.) to monitor pressure drop across HEPA. Door : SS 304 double walled door construction with flush glass view panels with SS handles and SS hinges. Interlocking : Electro-Magnetic interlocking arrangement to put-off UV Light if either side door opens. Shelves : SS 304 hanging arrangement (or) removable type shelves Temperature Control : Heater with thermostat for control of temperature ON/OFF Switches : SS ON/OFF switches for motor & lights Switch Socket : 6/15 amp single-phase switch socket use for external equipment DOP Port : DOP test port at upstream of HEPA filter to personnel for carrying out the HEPA filter integrity test. Electrical Supply : 230V AC 1- Ø 50HZ / 415V AC 3-Ø 50HZ Noise Level : Less than 67 dB on scale ‘A’ when ambient is not greater than 55 dB on scale ‘A’ Vibration Level : Minimum Optional Accessories : U.V. Light with Hour Meter used for bacteria/virus killing & interlocking arrangement to put off UV Light if either side door opens. 6/15 amp single-phase switch socket for external equipment Electro-Magnetic / Mechanical Interlocking Audio visual alarm indicating condition of HEPA filters Clean down timer with operation hold indicator VFD based control systems Photohelic guage / Digital pressure gauge to monitor of pressure drop across filter. Sodium vaporlamps

Dynamic Pass Box is designed to allow material transfer through controlled environment without much personnel movement to minimize man /material movement & avoid cross contamination between different classified areas. This is essentially installed to minimize movement of personnel for transfer of material into and from the clean room. It aids to achieve desired classification, maintain integrity of products, process & controls ingress of particulate contaminants into clean room & between different classified areas. Our range of Dynamic Pass Box is available in various specifications as per the client’s requirements. Dynamic Pass Box is with a variety of standard dimensions also our pass boxes can be custom engineered to any size. Dynamic pass boxes are available in powder coated Mild Steel, SS 304 / 316 / 316L or a combination of both. Technical Specification : HEPA Filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% down to 0.3µ. Pre-filter : Pre-filter are made from non-woven synthetic with HDPE mesh; conforms to EU 6 grade, with an efficiency rating better than 95% down to 5µ. MotorAlower Assembly : Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA. Differential Pressure Gauge : Dwyer make magnehelic Gauge (0 -25 mm: 1 No.) to monitor pressure drop across HEPA. Door : SS 304 double walled door construction with flush glass view panels with SS handles and SS hinges. Interlocking : Electro-Magnetic Interlocking type door arrangement to ensure that only one side door can be opened at any given time. Door Indication : Indicators on either side for door open condition. Door release : Door release switch on either side SS coving : Internal covings for easy cleaning ON/OFF Switches : SS ON/OFF switches for motor & lights Switch Socket : 6/15 amp single-phase switch socket use for external equipment DOP Port : DOP test port at upstream of HEPA filter to personnel for carrying out the HEPA filter integrity test (with PAO solution). Electrical Supply : 230V AC 1- Ø 50HZ / 415V AC 3-Ø 50HZ Noise Level : Less than 67 dB on scale ‘n’ when ambient is not greater then 55 db on scale ‘A’ Vibration Level : Minimum Optional Accessories : U.V. Light with Hour Meter used for bacteria/virus killing & interlocking arrangement to put off UV Light if either side door opens. Support stand for mounting of pass box Flange for sealing the gap between the pass box and the clean room wall Electro-Magnetic / Mechanical Interlocking Floor mounted construction with three side wall structure & Door drop seal Audio visual alarm indicating condition of HEPA filters Clean down timer with operation hold indicator VFD based control systems Photohelicguage / Digital pressure gauge to monitor of pressure drop across filter. Sodium vaporlamps Flame proof fitting

Biological safety cabinet is designed to provide both a clean work environment and protection to operators who work with biological hazards. It has vertical laminar airflow to create a barrier to airborne particles and microorganisms. High Efficiency Particulate Air (HEPA) filters are used to provide clean air in the work area as well as to the environment through exhaust with the HEPA filter. The air in the cabinet is re-circulated over the work area through the HEPA filter, It is a contaminant-free environmental Protection. Biological Safety Cabinet range includes a variety of containment products to suit laboratory applications within the academic, pharmaceutical, biotech, healthcare, R&D and industrial sectors. Our advanced biological safety cabinets have been designed with safety and efficiency in mind. User-friendly features and advanced control systems make these cabinets both versatile and reliable. The biosafety cabinets are classified into three categories Class I , Class II or Class III provides a range of solutions for the containment of category. Class II : The Class II vertical laminar-flow biological cabinet is an open-front, ventilated cabinet. This cabinet provides a HEPA-filtered re circulated mass airflow within the workspace.The exhaust air from the cabinet is also filtered by HEPA filter. Thus, Class II bio safety cabinet provides protection to product as well as to human beings and environment. While HEPA filters are effective for trapping particulates and infectious agents, it is suitable for the containment of bio hazardous material thereby providing sterile environment for cell culture. Class II cabinet is most versatile and economical model. Technical Specification : Supply filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% down to 0.3µ. ExhaustHEPA filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at exhaust position with an efficiency rating better than 99.999% for 0.3µ. Pre-filter : Fresh Air Pre-filter are made from non-woven synthetic with HDPE mesh; conforms to EU 6 grade, with an efficiency rating better than 95% down to 5µ. MotorBlower Assembly : Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA. Differential Pressure Gauge : Dwyer Make Magnehelic Gauge (0 -25 mm: 2 Nos.) to monitor pressure drop across HEPA filter & work area with respect to ambient. Lighting : Fluorescent light (250 Lux) at work surface ON/OFF Switches : SS ON/OFF switches for motor & lights SS 304 work table : SS 304 work table with perforations at front & back which can be removed occasionally for cleaning purpose front door : 1-piece fully openable sliding toughened glass with counterweight arrangement DoorOpening Alarm : Alarm triggers in case front door is raised more than 8” (i.e. safe clear door opening during operation) Exhaust Duct : SS 304 stands with leveling lugs Side panel : Double walled flushed glass side panels Electrical Supply : 230V AC 1- Ø 50HZ / 415V AC 3-Ø 50HZ Noise Level : Less than 67 dB on scale ‘A’ when ambient is not greater than 55 dB on Scale ‘A’ Vibration Level : Minimum Optional Accessories : Front door with gloves and glove port arrangement Transfer hatch for material movement PLC based control system U.V. Light with hour meter SS 304 cock for gas and air Foldable polycarbonate front door Audio visual alarm indicating condition of HEPA filters Clean down timer with operation hold indicator VFD based control systems Photohelic guage / Digital pressure gauge to monitor of pressure drop across filter. Sodium vaporlamps Flame proof fitting Safe change bag in / bag out arrangement for filters  

Air Showeris designed to supply Class 100 HEPA filtered air at high velocity it helps remove particulate matter from the personnel entering into the clean room. Air shower works as partial clean equipment installed at the partition between the clean room and non-clean rooms to shower the personnel or matters before entering the clean area. This unit helps to remove dust effectively and maintains the normal working status. Air shower is available in various standard dimensions. The cabinet can be custom engineered to fit any size. These Showers are available in powder coated Mild Steel, SS 304 / 316 / 316L or a combination of both. Technical Specification : Supply filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% down to 0.3µ. Pre-filter : Pre-filter are made from non-woven synthetic with HDPE mesh; conforms to EU 6 grade, with an efficiency rating better than 95% down to 5µ. MotorAlower Assembly : Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA. Differential Pressure Gauge : Dwyer Make Magnehelic Gauge (0 -25 mm: 1 No.) to monitor pressure drop across HEPA. Lighting : Fluorescent light (250 Lux) at work surface ON/OFF Switches : SS ON/OFF switches for motor & lights Switch Socket : 6/15 amp single-phase switch socket use for external equipment Control System : Interlocking system to ensure that both the doors cannot open at the same time & to ensure that both the doors stay locked during the time of air flow. Time settingfor Air shower : Time setting for air shower operation time (settable for 30 seconds to 5 minutes) Emergency Operation : Emergency Stop will be provided Door Opening : Straight entry – Straight exit and 90 degree door opening. Operation mode : Automatic as well as manual mode DOP Port : DOP test port at upstream of HEPA filter to personnel for carrying out the HEPA filter integrity test (with PAO Solution). Door : SS 304 doors with double walled flush glass view panels and door closer Electrical Supply : 230V AC 1-0 50HZ / 415V AC 3-0 50HZ Noise Level : Less than 67 dB on scale ‘A’ when ambient is not greater than 55 dB on scale ‘A’ Vibration Level : Minimum Optional Accessories : Audio visual alarm indicating condition of HEPA filters Clean down timer with operation hold indicator VFD based control systems Photohelicguage / Digital pressure gauge to monitor of pressure drop across filter. Sodium vaporlamps Flame proof fitting

Air Pack Technical Solutions HVAC provides world class environmental control for high precision industries like pharmaceutical, Biotech, Healthcare, Food & Beverages, Research & Development labs, electronics and semi conductors, manufacturing industries and hospitality industry. Some of the important components of the wide product range include: Pharma grade hygienic Air Handling Units Hygienic design to meet highest international Air Pack Technical Solutions. Smooth surfaces with inside covering Anti – Microbial sealing Leak proof service doors Stainless steel drain pans High efficiency plug fan Built in variable frequency drives Easy connectivity to Building Management system / Environment control system. Fan Filter Units They are ideal for use in new Cleanroom construction or changing non clean areas into classified clean zones in Pharmaceutical, Biotech and research laboratories. Compact & highly efficient. Unidirectional airflow of Ultra clean HEPA filtered Air Low energy consumption Factory mode ducting Pre fabricated ductwork as per International standards of SMACNA Superior supports & line of connections Easy erection & commissioning at site.