Laminar Airflow / Laminar Air Flow Bench Dealers in Panchkula

Reverse laminar air flow reverse laminar airflow booths (aka powder containment booths) are primarily designed to control the hazardous emissions of dust clouds during powder weighing, charging, sampling and dispensing operations. these booths provide highest level of protection to the operator and the environment from airborne contaminants generated during such powder handling operations and also protects the product from ambient air contamination.

• Material: Metal
• Application: In Laboratory
• Voltage: 220V
• Condition: Good
• Power Source: Electric
• Feature: Easy To Install, Fine Finish, Portable, Rust Proof, Strong Construction
• Warranty: 3years

The Laminar Flow Cabinet, which we offer, creates a particle-free working environment by taking air through a filtration system and exhausting it across a work surface in a laminar or unidirectional air stream. Commonly, the filtration system compromises of a pre-filter and a HEPA filter. Because the air within the cabinet does not contain any airborne particles, it is also sterile. These Laminar Flow Cabinets are enclosed on the sides and kept under constant positive pressure in order to prevent the infiltration of contaminated room air. The most common application of the Laminar Flow Cabinet is to provide an individual clean air environment for small items not requiring a full-size cleanroom. In the laboratory, individual Laminar Flow Cabinets are commonly used for specialized work such as spin coating to eliminate airborne contamination that would otherwise interfere with work processes. We are reliable Supplier of the Laminar Flow Cabinet from Pinjore (Haryana).

Laminar Air Flow is designed to provide Class 100 working environment at rest with built in scavenging system to ensure product, operator as well as surrounding environment protection. The Reverse Laminar Airflow Bench finds a major application in sampling and dispensing. Majorly used for mixed airflow stream to control the hazardous emission of dust powder during dispensing or sampling process. This ensures to draw powder aerosols away from the operator and the operating environment protecting products and providing safe working conditions for personnel. Reverse Laminar Air Flow Unit operates on a re-circulatory airflow principle providing containment by air movement. The pre-filters at the base of the rear wall capture the airborne contaminants generated. Intake velocity at pre-filters increases to ensure scavenging effect. A small percentage of air is discharged from the booth through the bleed exhaust HEPA filter to maintain the working space under negative pressure. Reverse Laminar Air Flow Unit is with a variety of standard dimensions also our cabinet can be custom engineered to any size. Reverse Laminar air flow are available in powder coated Mild Steel, SS 304 / 316 / 316L or a combination of both. Technical Specification : Supply filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% down to 0.3µ. ExhaustHEPA filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at exhaust position with an efficiency rating better than 99.999% for 0.3µ. Intermediate Filter : Intermediate filter are made from non-woven synthetic with HDPE mesh; conforms to EU 7 Grade, with an efficiency rating better than 95% down to 3µ. Pre-filter : Pre-filter are made from non-woven synthetic with HDPE mesh; conforms to EU 4 Grade, with an efficiency rating better than 90% down to 10µ. MotorBlower Assembly : Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA. Differential Pressure Gauge : Dwyer Make Magnehelic Gauge (0 -25 mm: 2 Nos.) to monitor pressure drop across HEPA & Intermediate filter and (0-10 mm 1 No.) across prefilter. Lighting : Fluorescent light (250 Lux) at work surface ON/OFF Switches : SS ON/OFF switches for motor & lights Switch Socket : 6/15 amp single-phase switch socket use for external equipment Control Panel : Electrical control panel mounted on the side panel of the unit. DOP Port : DOP test port at upstream of HEPA filter to personnel for carrying out the HEPA filter integrity test (with PAO Solution). Side Panel : SS 304 Double Walled Side Panels. Electrical Supply : 230V AC 1- Ø 50HZ / 415V AC 3-Ø 50HZ Noise Level : Less than 67 dB on scale ‘A’ when ambient is not greater than 55 dB on scale ‘A’ Vibration Level : Minimum Optional Accessories : Front Anti-static PVC Curtains Audio visual alarm indicating condition of HEPA filters Clean down timer with operation hold indicator VFD based control systems Photohelicguage / Digital pressure gauge to monitor of pressure drop across filter. Sodium vaporlamps Flame proof fitting Safe change bag in / bag out arrangement for filters Double skin side panels with view windows Service access from front / back / side Horizontal internal coving at base

Horizontal Laminar Air Flow Unit Our Horizontal Laminar Air Flow Unit are manufactured using high grade materials as per international standards and specifications. These offers high-end performance and reliability. Key features are: • Quiet operation 60 db • Velocity 0.45m/s +/-20% below working area • Counter balance wet glass shutter • Feather touch buttons for on/off M/c, UV & Aux. Socket • MOC SS304, MS Powder coated • Light with 1000 lux & UV tube • Class 100 work surface • Battery backup

• Features:: Sturdiness, Easy installation, High strength .
• Item Code: LBS-CLAF-149