Refrigeration Plant Dealers in Panchkula

• Size: Available In Different Sizes
• Material: Copper
• Warranty: 1year
• Voltage: 220 V/ 50 Hz
• Finishing: Polished

• Country of Origin: India
• Warranty: 2 Years

Features: All system components, including condenser, compressor, evaporator, capillary tube, filter, refrigerant receiver, accumulator, hand valves, pressure gauges, expansion devices, are mounted on the front panel for direct operation and observation. Use control panel to select heat pump cycle (cooling or heating), fan speed of evaporator and condenser, and expanding path of the refrigerant Use control box to monitor the system voltage and current as well as heat pump status. Provide three types of expansion devices, including capillary tube, pressure expansion valve, and thermal expansion valve for refrigerant to pass through. Provide 6 sight glasses to observe the refrigerant status before and after passing evaporator, condenser, expansion devices, and compressor. Provide 5 hand valves to control the flowing direction of the refrigerant. Provide high and low pressure protection switches to automatically halt the compressor when detecting wrong refrigerant flowing path. The refrigerant path for high pressure tube is painted in red and low pressure tube in blue. 

Our research and engineering team has developed Model ISQB Thermostat for over temperature protection of heater moulds. This thermal overload protector has a body made of solid machined aluminum, which provides the thermal overload protector with greater strength and better heat sensing capacity. This thermostat can be mounted on to the heater mould with two screws. This thermal overload protector contains a snap action bimetal strip and a beryllium copper switching blade which work on the principle of the over center mechanism. The normal snap action disc thermostats have delayed restart and the trip temperature drifts downwards, but due to the over center mechanism, our thermostats have quick restart characteristic and the trip temperature remains stable, even after long usage. The contacts are made of solid silver which give it a long life. All the internal components are spot welded and the lead wires are Teflon insulated which can withstand high temperature. The body of the thermostat is double sealed with high temperature resistant epoxy adhesive, so it is not affected by varnish, fumes, dust, etc. This thermal overload protector is available in Normally Open (N.O.) or Normally Closed (N.C.) contacts. Special Features: Solid Machined Aluminum Body Better heat sensing capability and greater strength Easily mountable with two screws Solid silver contacts for long life of 1,00,000 operations Available in Normally Open (N.O.) or Normally Closed (N.C.) contacts Snap action bimetal thermostat Double sealed body with Teflon insulated lead wires Available in any temperature from 50C to 160C Application of Thermostat/Thermal Overload Protector Thermostat Model ISQB functions as a heater mould over heat protection device, in case, the main temperature controller fails. It has two grooves, one on each side, so that it can be screwed on to the heater mould with two M3 screws. This thermal overload protector needs to be screwed on to a flat surface near the heater so that it can sense the temperature. The thermostat is connected in series with the heater for low amperes (up to 500W heaters). For heavy loads, use a contactor or relay. If there are multiple heaters, then one thermostat needs to be connected with each heater. When the heat builds up, the thermostat will sense the temperature rise and trip off, thereby, disconnecting the heater from the mains. This trip temperature is not adjustable and is calibrated at the time of manufacturing. It is specified by the customer and it can be different for different types of heater moulds. Please consult us complete technical guidance.

• Tower Material: Fiberglass Reinforced Polyester
• Shape: Round
• Brand Name: CORROWIN
• Usage/Application: Water Cooling
• Cooling Capacity: 10 TR 300 TR
• Tower Design: Counter Flow
• Tower Type: Forced Draft

bimetal thermostats, Thermostats, thermal circuit breaker

water jet condensers, Mist Cooling System, pneumatic control valve

Condensers, Glass Ampoules, Burettes, Beakers, double tip ampoules