Safety Cabinets Dealers in Panchkula

• Constructions: Class II
• Cleanliness (Class): 90 ft/min +/- 20 feet
• Construction: Industrial grade mica clad wooden board/M.S./S.S.
• Table: Stainless steel sheet table of ss-304 grade
• Per Filters: Washable pre-filter unit
• HEPA Filters: Glass pleated non woven fabric filter having 99.97% Efficiency 0.3 micro particles size.
• Air Flow: Unidirectional.
• Blower Assembly: Centrifugal lubricated bearing type ISI marked assembly
• Illumination: Fluorescent light illumination greater than 800 lux on work table
• Control Panel: Membrane type soft touch key pad
• Noise level: Noise level less than 60db
• Add on features: Gas/air/vacuum line cock
• Power Requirements: 500 watts – 750 watts (Model specific)
• Nominal voltage: 220-230 Volts
• Frequency: 50 Hz Single Phase

Biological safety cabinet is designed to provide both a clean work environment and protection to operators who work with biological hazards. It has vertical laminar airflow to create a barrier to airborne particles and microorganisms. High Efficiency Particulate Air (HEPA) filters are used to provide clean air in the work area as well as to the environment through exhaust with the HEPA filter. The air in the cabinet is re-circulated over the work area through the HEPA filter, It is a contaminant-free environmental Protection. Biological Safety Cabinet range includes a variety of containment products to suit laboratory applications within the academic, pharmaceutical, biotech, healthcare, R&D and industrial sectors. Our advanced biological safety cabinets have been designed with safety and efficiency in mind. User-friendly features and advanced control systems make these cabinets both versatile and reliable. The biosafety cabinets are classified into three categories Class I , Class II or Class III provides a range of solutions for the containment of category. Class II : The Class II vertical laminar-flow biological cabinet is an open-front, ventilated cabinet. This cabinet provides a HEPA-filtered re circulated mass airflow within the workspace.The exhaust air from the cabinet is also filtered by HEPA filter. Thus, Class II bio safety cabinet provides protection to product as well as to human beings and environment. While HEPA filters are effective for trapping particulates and infectious agents, it is suitable for the containment of bio hazardous material thereby providing sterile environment for cell culture. Class II cabinet is most versatile and economical model. Technical Specification : Supply filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% down to 0.3µ. ExhaustHEPA filter : Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at exhaust position with an efficiency rating better than 99.999% for 0.3µ. Pre-filter : Fresh Air Pre-filter are made from non-woven synthetic with HDPE mesh; conforms to EU 6 grade, with an efficiency rating better than 95% down to 5µ. MotorBlower Assembly : Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA. Differential Pressure Gauge : Dwyer Make Magnehelic Gauge (0 -25 mm: 2 Nos.) to monitor pressure drop across HEPA filter & work area with respect to ambient. Lighting : Fluorescent light (250 Lux) at work surface ON/OFF Switches : SS ON/OFF switches for motor & lights SS 304 work table : SS 304 work table with perforations at front & back which can be removed occasionally for cleaning purpose front door : 1-piece fully openable sliding toughened glass with counterweight arrangement DoorOpening Alarm : Alarm triggers in case front door is raised more than 8” (i.e. safe clear door opening during operation) Exhaust Duct : SS 304 stands with leveling lugs Side panel : Double walled flushed glass side panels Electrical Supply : 230V AC 1- Ø 50HZ / 415V AC 3-Ø 50HZ Noise Level : Less than 67 dB on scale ‘A’ when ambient is not greater than 55 dB on Scale ‘A’ Vibration Level : Minimum Optional Accessories : Front door with gloves and glove port arrangement Transfer hatch for material movement PLC based control system U.V. Light with hour meter SS 304 cock for gas and air Foldable polycarbonate front door Audio visual alarm indicating condition of HEPA filters Clean down timer with operation hold indicator VFD based control systems Photohelic guage / Digital pressure gauge to monitor of pressure drop across filter. Sodium vaporlamps Flame proof fitting Safe change bag in / bag out arrangement for filters  

We are offerimg Biosafety (bio-safety) Cabinet . our Biosafety (bio-safety) Cabinet is Manufactured Using High Grade Materials as per International Standards and Specifications. 100% Air Exhausts Through Hepa Filter Ad Vertical Laminar Air Flow Shield Provides Protection and Emission Area Against Each Other. Working like Barriers, It Ensures Particles from Outside Do Not Get In. Product Emissions Captured Safety & Led After (protection of Persons & Room Avoidance from Cross Contamination in the Room) & Exhaust of Air Through Mini Pleat Hepa or Decontamination Tanks (protection of Environment). Bio Safety Cabinet, Designed for Use with Bio Safety Level 1, 2 & 3 for Biolofical or Cytotoxic Agent. Key Features Are: • bio Safety Cabinet with Virus Burner to Eliminate Hazardous Viruses During Work • 30% or 10 % Exhaust of Class 100 Air Protect Environment • class 100 Air from Supply Hepa Protects the Product • velocity 90 ± 20 Below Working Area • gas Burner Will Be Provided • drain Valve for Collection of Liquid • feather Touch for Operating the Machine • heavy Duty Gauge Ss304 Construction of Bio Safety Cabinet • counter Balance with Glass Shutter is Provided for Protection During Handling Hazardous Samples & Contents • ss316 Tray Will Be Provided for Resistance of Corrosion [optional]