ADVANCE STEEL & TUBE MILLS Halol, Panchmahal, Gujarat

Electric-resistance-welded(ERW), NPS 1 to NPS 10, inclusive [DN 25 to DN 250], In bundles, If need, all the pipes can be covered in waterproof wrapping.,: Chemical Composition, Flattening Tests, Hydrostatic Test, Nondestructive 9- Electric Test and etc. as customer¡¯s requirement.

seamless tubing; titanium; titanium alloy; tubing; weldedcold worked tubing; welded tubing ; Condenser and heat exchanger systems--titaniumtitanium alloy; Palladium (titanium plus palladium)--specifications; Titanium alloy pipetube--specifications; Titanium plus palladium--specifications; Titanium (Ti)alloys--specifications; UNS R50250 (Ti, unalloyed); UNS R50400 (Ti, unalloyed); UNS R50700 (Ti, unalloyed); UNS R52250 (Ti, low-alloyed); UNS R52400 (Ti, low-alloyed); UNS R53400 (Ti alloy); UNS R54520 (Ti alloy); UNS R56320 (Ti alloy); UNS R58030 (Ti alloy); Welded TiTi alloy--specifications; UNS R50550 (Ti, unalloyed)

Chemical composition and mechanical properties Bending, flaring, flattening, hydraulic, eddy current, ultrasonic (against different specification or specific requirement by customer) ASTM-F136-98e1 Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy (UNSR56401) for Surgical Implant Applications ASTM-F67-00 Unalloyed Titanium for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) ASTM-F1108-97a Ti6AL4V Alloy Castings for Surgical Implants (UNS R56406) ASTM-F-620-00 Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants

Dimensions : ASTM, ASME and API Specifications : ASTM A790 ASME SA790, ASTM A789 ASME SA A789 Schedule : SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS Outer Diameter : 6.00 mm OD up to 250 mm OD, Sizes up to 12” NB Thickness : 0.3mm – 50 mm Type : Seamless ERW Welded Fabricated CDW

Square Steel Tube, is a welded structural steel tube with a internal weld seam present. Available in A513 or A500 Grade B depending on its size and wall thickness, Square Steel Tube is widely used in industrial maintenance, agricultural implements, transportation equipment, ornamental, etc.

Advanced Steel & Tube Mills is one of the major Indian manufacturers, exporter & suppliers of Stainless Steel Tube & OCTG, CRA (Corrosion-Resistant Alloy) Seamless Tubes, Stainless Steel , Super Duplex , Duplex , Welded & Semaless, Carbon Steel Seamless Pipes, Tubes, Capillary Pipes & ‘U’ Tubes for applications in oil & gas, LNG, Thermal & Nuclear Power Plants, Chemical Industries, Fertilizers Plants, (petro) chemical, shipbuilding, desalination, water treatment, energy industries, EPC and Pipes for General Engineering Purpose.

Bending, flaring, flattening, hydraulic, eddy current, ultrasonic (against different specification or specific requirement by customer)Looking for trusted & approved suppliers in India for ASTM B861 Titanium Alloy Seamless Pipe, Complete technical info for buyer of ASTM B861 Titanium Alloy Seamless Pipe

Nickel is a silvery-white lustrous metal with a slight golden tinge that takes a high polish. It belongs to the transition metals and is hard, ductile, malleable, somewhat ferromagnetic, and a fair conductor of heat and electricity. Nickel Alloys or Superalloys or High performance alloys are highly engineered to offer a superior combination of high temperature corrosion resistance, toughness , heat resistance and strength and for the most demanding applications.

Utmost care is taken towards Packing of the Monel Tube so as to ensure that the resultant Coils, Foils, Tubes, Pipes and Fittings reach in the same condition as desired by our valued customers.

Utmost care is taken towards Packing of the ASTM B 725 Monel 400 Welded Pipe so as to ensure that the resultant Coils, Foils, Tubes, Pipes and Fittings reach in the same condition as desired by our valued customers.

Utmost care is taken towards Packing of the Inconel Tube 600, 601, 625, 800, 825 so as to ensure that the resultant Coils, Foils, Tubes, Pipes and Fittings reach in the same condition as desired by our valued customers.

Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test etc), Exterior Size Inspection.

Ductile Iron Spun Pipes are produced in both as per Thickness Class (like, K9, K7 etc) and Pressure Class (Like C25, C30, C40 etc). The Standard Products are listed below. Pressure Class - C20, C25, C30, C40, C50, C64, C100. Thickness Class - K9 and K7

Copper Nickel tubes, 30% – C71500 - has, in general, the best resistance of any of the copper alloys to impingement attack and to corrosion from most acids and waters. It is being used in severe corrosive conditions in which service lives longer than those of other copper alloys are desired.

Size Range : 18" - 26" Schedules : 20, 30, 40, Standard (STD), Extra Heavy (XH), 80, 100, 120, 140, 160, XXH Grades : ASTM A53 Gr B, ASME SA53 Gr B, API-5L Gr B, ASTM A106 Gr B, ASME SA106 Gr B, ASTM A106 Gr C, PSL 1 and PSL2

Standard: ASTM A53A53M Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless Grade£ºA and B Type: Electric Resistance Welded(ERW) Size: NPS 1 TO NPS 24 [DN25 to DN 600], with nominal£¨average£©wall thickness as given in ASME B 36.10M or as customer¡¯s requirement. Outer Diameter: 1-24 inches( 33.4¡ª609.6mm) Thickness: 3-12mm

ASTM A335 A335M - 11 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service Alloy Steel Pipes (ASTM A335 P11) offered by us are made as per IBR standards and are used mainly for boiler operations. We source these seamless pipes in varied size range. Further, we can also get these customized as per boiler piping requirements. For ensuring in them optimum quality standards, we source these from quality manufacturers. We also offer clients of having their own mark on them.

: ASTM B210 drawn, ASTM B241 extruded, AMS 4173, AMS 4080, AMS 4082, AMS4083, WW-T-7006 British Specifications : H20, HE 20 Applications : Bicycle Parts, aircraft ducting, wheelchair frames, telescopes, machined bushes, air cylinders Size Range : 18" - 16" (3mm - 406mm) OD; .020" - 2" (.5mm - 50mm) wall

ASTM A 265, B 366, B 463, B 464, B 471, B 472, B 473, B 474, B 475, UNS N08020, NACE MR0175 Other common names : Carpenter 20, 20Cb-3®, Incoloy® alloy 20Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)

Standard: A 106 Specification for Seamless Carbon Steel Pipe for High-Temperature Service Grade: GR.A, GR.B and GR.C Size: NPS 18 TO NPS 48[DN6 to DN 1200], with nominal average wall thickness as given in ASME B 36.10M.