Flange Guards Dealers

• Flange Type: Plain
• Corrosion Resistant: Yes
• Material: Metal
• Shape: Round
• Certification: ISI Certified
• Color: Grey
• Finishing: Polished
• Size: 10-20 Inch, 20-30 Inch

Weld Neck A Blind Flange is which has no bore, and is used to close ends of piping systems. A blind flange also permits easy access to a line ones it has been sealed. The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being made. The reduction can be either threaded or welded.This flat face blind flanges are used to blank off pipelines, valves and pumps, it can also be used as an inspection cover. It is sometimes referred to as a blanking flange.

• Size: Available in Different Sizes
• Material: Metal
• Shape: Round
• Thickness: 10-20mm
• Feature: Corrosion Proof
• Finishing: Polished
• Color: Grey, Silver

We are offering sorf flange, slip on sorf flanges a solid, circular pipe flange which is slipped over the end of a pipe and welded in. We offer high quality slip on flanges that are manufactured stringently following latest technology. Precisely engineered, these slip flanges possess the following features:- stainless steel: astm a 182, a 240 grade: f 304, 304l, 304h, 316, 316l, 316ti, 310, 310s, 321, 321h, 317, 347, 347h,904l, duplex stainless steel uns s31803, 2205, super duplex stainless steel uns s32750 carbon steel: astm a 105, astm a 181 alloy steel: astm a 182, gr f1, f11, f22, f5, f9, f91 nickel alloys: monel 400 & 500, inconel 600 & 625, incolloy 800, 825, hastelloy c22,c276 copper alloys: copper, brass & gunmetal size : 18" nb to 48"nb. Class : 150 , 300 ,400 ,600 ,900 , 1500 & 2500.

• Condition: New
• Shape: Round
• Thickness: 5-10mm
• Application: Fittings
• Color: Shiny Silver
• Surface Finishing: Polished

We have established ourselves as the primary Manufacturer and Supplier of BS Flanges in the international market. Our market share has gradually increased because of our client's immense satisfaction and trust. We manufacture 10mm (1/4") through 1200mm (48") N.B BS Flanges. Specifications : Slip On, Weldneck, Blind, Plate & Circular Flanges. Sizes Available : 1/4" through to 48"Wall Thickness : Schedule 5s through to Schedule XXS and heavier. Dimensions/Pressure Ratings : BS3293 BS4504 BS 10 TABLE D & E BS 10 TABLE E & F. 150lb through to 600lb PN2.5 through to PN40 Flange Facings : Raised Face, Ring Type Joint, Flat Face. Material Grades : BS Stainless Steel Flanges A182 F304/L/H, F310/H, F316/L/H, F321/H, F347/H, F410, F440, 904L BS Carbon Steel Flanges A105, C22.8 BS Low Temperature Steel Flanges A350, LF2, LF3, LF6 BS Alloy Steel Flanges A182 F1, F5, F9, F11, F12, F22, F91 BS High Yield Flanges A694, F42, F52, F60, F65, F70 BS Duplex & Super Duplex Flanges A182 F51, F44, UNS S32760 BS Nickel Alloys Flanges 200, 400, 600, 625, 800, 825 BS Alloys Flanges ALLOY 20, ALLOY C, ALLOY C276, ALLOY B2 Unusual Grades Bronze, Brass, Copper, Cupro Nickel, Titanium

• Material: Stainless Steel
• Finishing: Polished
• Shape: Rectengular, Square
• Color: Silver
• Application: Industrial
• Feature: Anti Dust, Durable Coating
• Type: Stainless Steel Sheet
• Country of Origin: India

• Color: Grey
• Brand Name: Sneh Engineering
• Material: Stainless Steel
• Thickness: 15-20 mm
• Usage/Application: Industrial
• Inner Diameter: 70-100 mm
• Surface Finishing: Polished

Highly acclaimed Manufacturer & Supplier of Weld Neck Flanges, WNRF Flanges, Carbon Steel Weld Neck Flanges, SS Weld Neck Flanges, Alloy Steel Weld Neck Flanges in India.We are largest manufacturers of Weld Neck Flanges & have huge stock of 304 Weld Neck Flanges, 316 Weld Neck Flanges, astm a105 Weld Neck Flanges, astm a182 Weld Neck Flanges as per asme / ansi B16.5 Weld Neck flanges, ansi B16.47 Weld Neck flanges, Din Weld Neck flanges, jis Weld Neck flanges & uni Weld Neck flanges Standards.We offer high quality Forged Flanges in all size, classes & dimensions like Class 150 Weld Neck Flanges, Class 300 Weld Neck Flanges, Class 600 Weld Neck Flanges, Class 900 Weld Neck Flanges, Class 1500 Weld Neck Flanges & Class 2500 Weld Neck FlangesTrident Alloys is a largest Manufacturer, Supplier and Exporter of Welding neck Flange, WN forged Flange, welding-neck Flanges, ASME 16.5 Weld Neck Flanges / WNRF Flanges in forged steel, Stainless Steel, AS,CS etc. Weld Neck Flange is flanges that designed to be joined to a piping system by butt welding. This kind of flange include lots of specification,Weld neck Flange is expensive because of its long neck and cost of people for contact WN flange with pipeline or fitting, but is preferred for high stress applications. The necks, or hubs, transmits stresses to the pipeline. The gradual transition of thickness from the base of the hub to the wall thickness at the butt weld provides important reinforcement of the Weld Neck flange. The bore of Weld-Neck flange matches bore of the pipeline, reducing turbulence and erosion. Weld Neck Flanges are available in following specifications:

• Material: Metal & Plastic
• Finishing: Polished
• Shape: Round
• Color: Yellow
• Size: Standard
• Country of Origin: India
• Application: Pipe Fitting

• Brand Name: Jindal

We make certain that the offered array of products is sternly packed and delivered safely to the customers' stated address and that too in the committed time span. With the assistance of skilled professionals and high-grade packaging system, we can easily furnish customized packaging requirements of the customers. Features : Durable Robustness Rust proof

• Size: 1/2" 36"
• Grade: ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.,Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640
•  :  
• Dimensions: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
• Class / Pressure: 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
• Specifications: ASTM / ASME SB 61 / 62 / 151 / 152

Nexus Metal and Alloys is a main manufacturer of Copper Nickel 70/30 Flanges and Copper Nickel 90/10 Flangesthat are a flawless decision in the event that you are searching for flanges that are cheap yet durable. Copper Nickel Alloys, understood for the high Copper content, with 10 % Nickel and little hints of Iron, Zinc, Lead and Molybdenum give the composite impermeability to disintegration and poisonous quality, trying a vital part in the destructive condition. Nexus Metal and Alloys are providers of ASTM / ASME SB 171, SB 151 Cu-Ni Flanges that have a little amount of Niobium that enhances the weldability of the spines, with a base yield quality of 15 ksi giving them direct durability.  

• Color: Silver
• Shape: Round
• Material: Metal
• Flange Type: Plain
• Specialities: Strong Construction, Perfect Shape, Durable
• Usage: Industry Use

A Flange is a method of connecting pipes, valves, pumps and other equipments to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are useally Welded or Screwed. Flanges joints are made by bolting together two flanges with a Gasket between them to provide a seal.   DIAMENTION . STD :- ASME B16.5/B16.47.   GRADE :- ASTM/ASME A105, A350 LF2 & A182 Gr.F5,F11,F22,F51,F52,F91,F92,F 304, F304H,F304L,309H, 309S, F310,F316, F316L,F317, F317L,F321 & F347H   CLASS :- 150#, 300#, 600#, 900#, 1500# & 2500#   RANGES :- 1/2”NB TO 24”NB

• Brand: UDAAN
• Material: Polypropylene
• Texture: Soft
• Shape: Round
• Color: Silver
• Application: Industrial Use
• Size: 2Inch
• Feature: Low Density Polyethylene, Long Life
• Type: Pp Flanges
• Country of Origin: India

• Size Range: 114mm to 2500mm diameter
• Operating Pressures: Maximum 3500kPa
• Maximum Velocities: 6m/s for cement mortar lined fittings
• Operating Temperatures: -40 Degree C to 70 Degree C
• Nominal Size: 4 in
• End Style: Flange x Plain End
• Materials: Ductile Iron, Stainless Steel, Carbon Steel, Etc.
• Flange Class / Pressure Rating: 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
• Flange Dimensions: ANSI B16.5, ANSI B16.47 Series A & B, ASA, API-605, MSS SP44, AWWA, Custom Drawings
• Coating: Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
• Applications/Usage: Offshore, Oil Field, Shipbuilding, Water System, Natural Gas, Pipe Projects, Electric Power, etc.

• Application: Pedestrian Area/ Light Duty Vehicle Area/ Heavy Duty Vehicle Area
• Capacity: 1.5 Ton / 5 Ton / 11.50 Ton
• Materials: Grey Cast Iron
• Logo: "Unicast" or As Per Buyer's Request
• Paint: Black Bituminious Paint or Epoxy Paint On Request
• Packing: Export Worthy

As a respectable firm, headquartered in Howrah(India), we are making available top-of-the-line quality products in the market. Keeping up with the latest demands of customers, we, as a trusted Supplier strive to provide quality Cast Iron Flanges.

• Material: Carbon Steel
• Surface Finishing: Non Polished
• Shape: Round
• Color: Black
• Usage: Industrial Use
• Specialities: Accuracy Durable, High Quality
• Country of Origin: India

Fret not! We are here to help you out with the payment procedures. Be it online or offline payment method, we are here to assist you all the way through the payment process. We understand that high-quality standards should be maintained throughout the offerings. And, for attaining this objective, we make use of superior-grade raw material for manufacturing the same.   Features : High strength Sturdiness Flawlessly finished

• Type: Solid
• Material: Stainless Steel
• Size: Standard
• Shape: Round
• Color: Silver
• Surface: Polished

• Material: Stainless Steel
• Finishing: Polished
• Surface Treatment: Polished
• Color: Silver
• Feature: Anti Rust, Durable
• Country of Origin: India

• Finishing: Polished
• Shape: Round
• Color: Silver
• Feature: Long Life, Fine Finish, Easy To Fit, Durable
• Type: Inconel Flanges
• Country of Origin: India

Description: Blind-Flange: Flange facing, raised face, flat face, lapped joint face, large male to female, small male to female, large tongue and groove, small tongue and groove, ring joint Standard: 125lbs, 150lbs, 300lbs, 600lbs, 900lbs, 1,500lbs, 2,500lbs, 3,000psi, 5,000psi and 10,000psi Carbon steel material: ASTM A-105, IS 2002, LF2 Stainless steel material: ASTM, A-182, F 304, F 304L, F 310, F316, F 316L, F 321, F 347, F904L Alloy steel material: ASTM A182 F1, F5, F9, F11, F12, F22, F91 Low temperature: ASTM A350 LF2, LF3 Size: ½ inches NB to 48 inches NB