Wet Scrubber Dealers in Villianur, Pondicherry

• Brand Name: NAPCEN
• Material: PP FRP
• Color: Blue
• Condition: New
• Application: Scrubbing
• Type: PP FRP
• Country of Origin: India
• Packaging Type: wooden

An Emergency chlorine scrubber, also known as a chlorine gas scrubber or chlorine gas neutralizer, is a safety device used to mitigate the release of chlorine gas in the event of an emergency or accidental chlorine gas leak. Chlorine gas is toxic and can pose serious health risks when inhaled, so it’s crucial to have effective safety measures in place, especially in facilities where chlorine is used or stored. An emergency chlorine scrubber working process: 1.Detection: In the event of a chlorine gas leak, a detection system, such as gas sensors or alarms, triggers the activation of the chlorine scrubber. 2.Activation: The scrubber is activated automatically or manually, depending on the system’s design and the severity of the chlorine leak. 3.Chlorine Gas Removal: The emergency chlorine scrubber uses a chemical or physical process to neutralize or absorb the chlorine gas. This process can vary depending on the specific scrubber design but often involves the use of chemicals that react with chlorine to form less harmful substances. 4.Exhaust: After the chlorine gas is neutralized, the scrubber typically exhausts the cleaned air or gas safely, ensuring that no harmful chlorine gas is released into the environment.

Packed-bed scrubbers consist of a chamber containing layers of variously shaped packing material, such as Pall rings, Raschig rings or Berl saddles that provide a large surface area for liquid-gas contact. The packing is held in place by wire mesh retainers and supported by a plate near the bottom of the scrubber. Scrubbing liquid is evenly introduced above the packing and flows down through the bed. The liquid coats the packing and establishes a thin film. The pollutant to be absorbed must be soluble in the fluid. In vertical packed bed scrubber, the gas stream flows up the chamber (countercurrent to the liquid).

• Type: Wet Scrubber
• Application: Scrubbing
• Condition: New
• Brand Name: Napcen
• Application: · Nitric Acid (HNO3) Fume scrubbing · Ammonia (NH3) scrubbing · Solvent v
• Efficiency: 99.5

Industrial process often generates large amount of exhausts gases, containing different gaseous air pollutants that are hazardous in nature and should be treated well before venting it to atmosphere as per pollution control Board norms. Napcen Wet scrubber system utilizes absorption techniques to separate pollutant acid gases from exhaust air. NAPCEN has been custom designing spray scrubber, Packed bed scrubber, Venturi scrubber, Horizontal type chromic acid scrubber for various customers across different industries. The selection and customization, is hugely depends on exhaust gas temperature, its constituents, corrosive nature, pollution loading, their absorption or adsorption nature, moisture contents etc. Napcen provides complete customization of its entire range of scrubbers.