CERINS CO. LTD. GIDC, Porbandar, Gujarat

Pre-Shipment Inspection (Scrap): Pre-shipment Inspection Certificate for Waste and Scrap: The pre-shipment inspection for Metal (Ferrous and Non-Ferrous), Plastic and Paper Scrap imported to India in accordance with the “Hand Book of Procedure Vol-1” and subsequent amended Public Notices / Notifications and Circulars issued by the Directorate General of Foreign Trade (DGFT) of India is compulsory.   Scrap is permitted only on the condition that it does not contain harmful toxic, radioactive, weapons, ammunition, shells, cartridges and other types of explosives, and pre-shipment inspection and certification (PSIC: Pre-shipment Inspection Certificate) is required.   Steel Scrap Type 7204 10 00 Waste and scrap of cast iron 7204 21 90 Other 7204 29 20 Of High speed steel 7204 29 90 Other 7204 30 00 Waste and scrap of tinned iron or steel 7204 41 00 Turnings, shavings, chips, milling waste, saw dust, fillings, trimmings and stampings, whether or not in bundles 7204 49 00 Other 7204 50 00 Re-melting scrap ingots 7404 00 10 Copper scrap 7404 00 22 Brass scrap 7503 00 10 Nickel scrap 7602 00 10 Aluminum scrap 7902 00 10 Zinc scrap 8002 00 10 Tin scrap 8104 20 10 Magnesium scrap   Metal wastes and scraps listed above are subject to import / customs clearance only under the following conditions:   When importing goods, the importer should submit the pre-shipment inspection certificate issued by the inspection and certification body. Imported goods should comply with metal waste / scrap classification codes and specifications recognized internationally. The import of scrap can only be done through the designated port in India below, without exception of special zone such as EOU and SEZ. Chennai, Cochin, Ennore, JNPT, Kandla, Mormugao, Mumbai, New Mangalore, Paradip, Tuticorin, Vishakhapatnam, ICD Loni, Ghaziabad, Pipavav, Mundra, Kolkata, ICD Ludhiana, ICD Dadri (Greater Noida), ICD Nagpur, ICD Jodhpur, ICD Jaipur, ICD Udaipur, CFS Mulund, ICD Kanpur, ICD Ahmedabad, ICD Pitampur and ICD Malanpur   An unpacked, compressed or loose type of metal scrap for which the stipulated pre-shipment inspection is not performed is subject to severe criminal penalties for the breach of FTP regulations and subject to be inspected for 100% at the time of customs clearance.   Related laws and regulations are available at http://dgft.gov.in/ Caution : The waste paper and waste plastics are also subject to inspection.   Inspection Application The exporter must fill in the Request for Inspection (RFI) with the date and time of the inspection, and apply to CERINS with the following documents.   Copies of L/C and/or Proforma Invoice (or Sales Contract); Packing List (Estimated packing list before inspection – After inspection, finalized packing list can be submitted to CERINS).   Field Inspection Quality (refer to ISRI standard); http://www.isri.org/; Radioactive contamination check; Checking explosive materials; Verification of calibration certificate of weight measuring equipment/system; Weighing inspection under the presence of CERINS inspectors; Container loading supervision.   Issuing Certificate Upon the completion of physical inspection and the shipment of the goods, please submit the final copies of the below listed shipment documents. CERINS issues inspection certificate after final documentation review.   Commercial Invoice; Packing List; B/L (Bill of Lading).

TRCU is the abbreviation of Technical Regulation of Customs Union. With the foundation of EACU, Eurasian Customs Union in 2010, signed by Russia, Kazakhstan and Belarus, and with the establishment of EEU, Eurasian Economic Union in 2015, unified conformity assessment procedure was introduced to its serving member states. Currently, with its 5 member states, Russia, Kazakhstan, Belarus, Kyrgyzstan and Armenia of EEU approved to adopt unified code of Technical Regulation and agreed to coordinate efforts to terminate national norms after its new regional certification procedure.   TRCU certification procedures follow consolidated informative assessment code to validate products’ compliance to Customs Union requirements. EAC mark on certificates refers to Eurasian Conformity, and the mark can be used for products certified under TRCU regulation. TRCU is the official regulation approved by the Union, supporting the conformity assessments within member states.   On the other hand, items not yet been included in unified TRCU lists may still need GOST certificates in accordance with each relative state. Therefore, to receive precise and up-to-date information on your products’ certification, consultation with experts is necessary.   CERINS Russia is an accredited Certification Body, for below TRCU Regulations: TRCU 004/2011 On safety of low-voltage equipment (15.02.2013) TRCU 010/2011 On safety of machinery and equipment (15.02.2013) TRCU 016/2011 On safety of vehicles operating on gaseous fuel (15.02.2013) TRCU 020/2011 Electromagnetic compatibility of technical means (15.02.2013) TRCU 032/2013 On safety of equipment, which works under pressure (01.02.2014)   Types of TRCU There are two typical types of TRCU: 1) CoC (Certification of Conformity) and 2) DoC (Declaration of Conformity)   Even within same product category, depending on details of product usage, specification, and potential danger levels, types can vary, therefore, to receive precise and up-to-date information on your products’ certification, consultation with experts is necessary.   TRCU Validity One is shipment (one-batch) and another serial production certificates.   One-shipment: Validation date follows the period mentioned in a contract between importer and exporter, subject to products used in plant projects like one-off products or products not for resale to 3rd parties. Serial production (1~5 years): The period of validity for the certificate will be given and during validity period, continuous exporting/importing is allowed. NOTE: Applicant: Only legal entity / organization registered in the territory of the Customs Union. Factory audit: serial production certificate requires factory audit including sample test or witness of test and regular post-audit as per validity period. Lead-time: 1 to 2 weeks after the presentation of complete technical documents is provided, or after the factory audit, inspection including test are completed if applicable.

cec (chartered engineer's certificate)   chartered engineer’s (ce) certification / inspection is required for the exportation of used (second-hand) goods / equipment / machineries to india. The operation test and packing inspection are carried out to check the operational condition, residual life, the evaluation of transaction price, inspection of detailed parts of the equipment, quantity and packing status of used goods. Ce inspection is to be performed by an inspection agency authorized by the government of india. In addition, this certificate issued after inspection is one of the obligatory documents to be submitted at the time of customs clearance, and customs clearance cannot be completed without ce certificate.   cerins is a registered member of the iei (the institution of engineers india) which is a government authority in india. So, cerins is issuing its own certificate. In addition, cerins conducts inspections tailored to the needs of customers in all parts of the world based on its branches and agent networks, including headquarter in korea.   inspection application: the exporter must fill in the request for inspection (rfi) with the date and time of the inspection and apply to cerins with the following documents. copies of l/c and/or proforma invoice (or sales contract); packing list (estimated packing list before inspection – after inspection, finalized packing list can be submitted to cerins); operation history document of goods/equipment/machinery (contents of repair, changing of equipment or its part, and costs for maintenance); document evidences to prove sales price (commercial invoice/contract value); declaration letter for remaining operating/service life.   operation test: quality review of goods; check quantity and spare parts; container loading supervision.   issuing certificate upon the completion of physical inspection and the shipment of the goods, please submit the final copies of the below listed shipment documents. Cerins issues inspection certificate after final documentation review. commercial invoice; packing list; b/l (bill of lading); export declaration issued by customs in the country of export; additional price information/evidence for cerins price verification if needed.