Fault Locators Dealers

• Certification: ISI Certified
• Application: Power Grade Use
• Feature: Electrical Porcelain, Superior Finish
• Frequency: 50Hz, 60Hz
• Warranty: 1year
• Model: GFL-T + GFL-R

The DC Earth Fault locator is suitable to test the DC Battery System and Trace Ground Faults. The system is suitable for Power Plants, Sub-Stations upto 765KV and other industries. The system is highly capable in tracing and pin pointing the DC earth faults in a live system without requiring any shut downs. The receiver sensitivity of 1mA and better is capable to trace most complex fault.   Custom built Special Testing Equipment and Test Benches also available on request.

• High sensitivity: pinpoints faults ON -LINE
• Immune to 50Hz and its harmonics: Portable and easy to operate

Digitrace dc 361p simplifies the tracking of ground faults on floating dc systems in power station. It's an advanced sensing system which precisely identifies and pinpoints the complex earth faults on any floating dc system in on-line condition. The fault resistance range is up to 100kî©. It is capable of finding faults in a maze of noise and other mimicking fault conditions, source of which is perplexing and misleading. It is a portable system comprising of two units : transmitter unit and receiver unit. the necessity dc floating system is an important part of any power station. Any earth faults on dc system can disturb the sensitive functioning of control units like trip relays, breaker etc., there by affecting the stability of the power station. Tracing earth faults in offline condition will interrupt the functioning of critical control circuitry and it is highly recommended to have an online dc earth fault locator to find out the faults on-line. Why taurus digitrace ? ã� high sensitivity ã� automatic capacitance balancing ã� detects and pinpoints faults on -line ã� indicates and pinpoints mixing of sources ã� high capacity battery for long and continuous operation ã� immune to 50hz and its harmonics ã� emc emi compliance ã� protected with ip 67 pelican casing ã� portable and easy to operate ttrraannssmmiitttteerr ã� power supply : built-in rechargeable battery ã� operating frequency : very low frequency ã� output voltage : auto selected from â± 12 to â± 50v ã� can be connected to any floating system from 48vdc to 300 vdc.

• Country of Origin: India
• Operating Temperature: 0o C to 55o C
• Power Supply: 230V AC, +/10 %, 50 Hz , Single Phase
• Output Voltage: 016 Kv Dc Continuously Variable
• Output Energy: 500 Joules
• Impulse Sequence in Auto Mode: 4 Sec , 6 Sec
• Indication: ON/OFF indication
• Type of Cooling: Air Cooled
• Storage Temperature: 0o C to 60o C
• Weight: 65 Kg Approx

We are one of the respected names engaged in the process of supplying quality Cable Pipe Fault Locator at nominal rates. We are well supported by a team of experienced personnel who take care of the storage facility ensuring zero damage to the products till the final dispatch of the orders. Features: Advanced technology Precision made Long life & sturdy

The BAUR titron is a new automatic cable test van designed for cable fault location and cable testing. The new generation of the high-performance cable test van is based on state-of-the-art technology and provides effi cient, safe and reliable cable fault location and cable testing.

• Length of the cable: from 1 meter to 25 km
• from 1 meter to 25 km: LT and HT of various gauges
• Power supply: Rechargeable Batteries
• Weight: Approx 18 kgs
• Accuracy: 99%

We are offering cable fault locator we have great pleasure to inform to you, we provide complete set of equipments in the field of cable laying projects. Along with the same, as we discussed, we also deal in fault detection for u/g & o/h lines with pre warning facilities on the live line before the actual fault occurs & various testing equipments for electrical parameters on hv transformers, cables, ct, pt, gis, etc. Van mounted with all in one set of equipments.

 we represent Kehui who are expertise in fault location in various application and they manufacture innovative products pioneer in Fault location. Kindly let me know if you need more information on these and would like to have any discussion on it.   Kehui SOLUTIONS:    Underground Cable Solutions: 1. Under Ground Cable Fault locators – MV & LV. 2. Cable Sheath Fault Locators 3. Cable and Pipe locators 4. Cable identifiers 5. Insulation analyzer 6. Cable Test Vans Substation & Overhead Line Solutions: 1. DC Earth/Battery Ground Fault Locator (24v – 240V DC system) 2. Fault Passage Indicators (distribution line fault indicator and locator) 3. Overhead Transmission Line Fault Locator, GPS synchronizers etc.  4. GPS Systems 5. Fault Recorders and Communicators 6. Distribution Automation etc.   Switched Reluctance Motors: Range from 5kW to 500kW

• Feature: Low cost - Increase productivity by equipping more technicians with their own TDRs.

A complete range of Cable Fault Locating Equipment for LV & HV Cables in Power Plants, Heavy Industry & Distribution Systems . Occurrence of cable fault can not be avoided due to many factors. Long outage of a cable from service results in heavy loss of revenue to the power distribution company, production loss to industries as well as unpleasant condition to general public. This requires an efficient instrument capable of locating the fault in minimum possible time and restoring the supply.

We are offering cable fault locator etc.intercable fos p-line series have been developed for all cable measuring tasks in low and medium voltage networks. Individual variants of the inter-cable fos p-line series have been selected in cooperation with the users and their requirements related to practice. The proven prelocation method based on art (arc reflection technique) surging has been integrated for the prelocation of high impedance cable faults.

• Type: Apex Locator
• Condition: New

description: proskit mt-7501,1mw fiber optic visual faultlocatorfeatures:  1 sec.quick illuminateto make checking work convenient 2 operation models locating fault accurately   3 supported connectors to give more versatile choice(fc/sc/st) portable, durable and ease to use support 2.5mm universal connectors (for fc/sc/st) dust-proof & crash-proof cap design for laser head both continuous and flashing modes available additional pouch bag receives convenient  specification: model number mt-7501 wavelength 650 nm±10 nm output power 1 mw light source class ii tested fiber length 3-5km power (batteries) aa (1.5 v) x 2 connector 2.5mm universal connector for fc, st and sc oal 175mm operating temperature -10~+55 ??? storage temperature -10~+70 ??? optional accessory   lc adaptor (5mt-7601-lc)

• Features: Consists of a transmitter and a receiver, Conductor tracing in the soil, Detecting fuses and assigning current circuits, Tracing metallic water and heating piping, Auto-Power-Off function

Consists of a transmitter and a receiver Used to detect or trace conductors and to find short faults in them. The signal generated by the transmitter is made to a modulated current, generating an electromagnetic field around a conductor. This electro magnetic field induces a voltage within the receiving coil. The induced voltage is amplified, decoded and converted to the original signal by the received and finally displayed on screen. It is used for finding  conductors  in  walls, conductor interruptions, short-circuits in conductors Conductor tracing in the soil Detecting fuses and assigning current circuits Tracing sockets and distribution sockets having accidentally been covered by plastering Detecting interruptions and short-circuits in floor heating Tracing metallic water and heating piping All application areas (both,voltage-free and live) are performed without usin any additional instruments Transmitter display indicates the transmission level,the transmission code, as well as the foreign voltage Receiver display indicates the reception level,the transmission code,as well as the mains voltage detection Automatic and manual sensitivity adjustment Acoustic reception signal may be switched off Auto-Power-Off function Backlight Additional lighting function when working under bad lighting conditions Additional transmitters are available to extend or distinguish several signals

• Application: ground faults in ungrounded dc systems
• Application: Laboratory
• Model Number: BGFT
• Voltage: 220 V
• Frequency: 50/60 Hz
• Output Voltage: 8.4 VDC
• Minimum Order Quantity: 1 Unit

• Brand Name: Eaton
• Color: White
• Condition: New
• Application: Control Panels, Industrial Use
• Certification: ISI Certified
• Feature: Electrical Porcelain
• Frequency: 50Hz

Voltage rating; 230 V -Type; AFDD+  -Number of poles; Two-pole  -Current test marks; As per inscription  -Impulse withstand current; Partly  -surge-proof, 250 A  -Frequency; 50 Hz -Leakage current type; A  -Rated switching capacity (IEC/EN 61009); 6 kA  In multifunction or all-in-one printers, fax machines, photocopiers and scanners, an automatic document feeder or ADF is a feature which takes several pages and feeds the paper one page at a time into a scanner or copier, allowing the user to scan, and thereby copy, print, or fax, multiple-page documents without having .

• Power: 2 AAA batteries
• Laser Output: 30 mW
• Laser Wavelength: 650 nm
• Connectors: 1.25 mm connector FC (or) 2.5 mm universal connector
• Dimensions: 175 mm long x 26 mm diameter
• Usage: Industrial

Locates visual faults including tight bends, breaks and bad connectors Accelerates end-to-end fiber checks Ergonomic case survives drops, impacts and vibrations Supports 2.5 mm and 1.25 mm SFF connectors Easily verifies polarity and identifies fibers Features continuous and flashing modes Over 80 hours of battery life with two AA batteries

• Application: Power sector,Telecom sector

• Type: Cable Fault Locators
• Color: Black
• Condition: New
• Application: Industrial Use, Power Grade Use
• Operating Temperature: Medium Temperature
• Frequency: 50Hz
• Power Source: Battery
• Feature: Easy To Use, Proper Working, Water Proof
• Warranty: 1year
• Automation Grade: Automatic
• Brand Name: Ragis

The rising demand for electrical energy increases the importance and priorities of uninterrupted services to customers. Thus, faults in power distribution networks have to be quickly detected, located and repaired. We offer Pan India 24 x 7 timely service for underground cables of up to 33 KV working voltage all over India from its nearest located branch. Our wide range of quality services include Underground cable fault location, Hi Pot Testing, Cable route tracing, power cable fault locator, and pipe & cable detector to accomplish the needs of all kinds of industries

Cable Fault Pre-locator is used to pre-locate short circuit, open circuit cable faults distance in TDR mode in power transmission & distribution / telecom network companies or any metallic cables. Key Features TDR mode Measurement maximum 8 km in selectable ranges. Portable design and easy to use. Menu driven operation. Tests any type of telecom, coaxial, network or power metallic cables. Comparison between healthy with faulty cables. Use of high speed Micro-controller. Automatic selection of Range, VOP and Gain in Auto mode. Automatic and Manual testing mode. Fully English Menu is easy to master and use. Color LCD Display Six function keys and simple operation. Pulse reflection testing (TDR) can test broken/open, short type of faults in all metallic cables. USB Pen drive, it is easy to upload memory data to computer. Rechargeable lithium battery with intelligent charger Continued 8 hours operating time on internal battery. Small size, light weight and Palm-held unbreakable ABS plastic housing. Rugged construction and easy to carry on site.

• Brand Name: Motwane
• Operating Temperature: 32 To 122° F (0 To 50° C)
• Input (specify one): 120 V, 60 Hz, 30 VA OR 240 V, 50 Hz, 30 VA
• Resistance Range: 1 Ω to 100 kΩ
• Capacitance Range: 1 to 100 µF
• Accuracy: ±20%
• Injected Signal: 25 Hz nominal, 3.5 V rms maximum, 110 mA maximum
• Storage Temperature: -40 to +149° F (-40 to +65° C)
• Relative Humidity: Up to 80%

Shyam Electronics & Electricals is based in Gujarat, India. Our company supplies quality assured devices which includes battery ground fault locators. The fault locators that we have listed on our website and supply to our customers are produced by the best manufacturers in our country. These are made with the use of quality parts that are sourced from reliable dealers and vendors in the market. We ensure that our products meet the needs of our customers and are also of amazing quality and type. Benefits Of Fault Detectors • These can locate the ground faults in underground DC battery systems can be easily located. • It can work even in the high electrical noise environment. • This makes tracing faults easy as simple. It identifies the characteristic magnitudes of the faults as well. • It is easy to use and needs only one operator. • One can carry it from one place to another without any kind of trouble. This instrument was developed to track, detect and also to locate the ground faults on the battery systems. One doesn’t have to resort or sectionalize to check if there is any problem in the system. There are different models which you can select and choose from our company to do the work. It tracks the faults and issues with both live and dead battery systems. You can save your hour time without unnecessarily troubleshooting with the use of these devices. These devices differentiate between the resistive fault currents and also capacitive charging currents. This feature of the devices also allows the increments to track and detect leakage paths and even in the presence of the surge-suppression capacitors. Choose us and get our products delivered right at your doorstep. We are the best wholesale battery ground fault locator supplier in Vadodara, India. Trust us and order our products in your required quantity. We will deliver products within the promised time frame.

Underground power cable fault locator suitable to locate U/G power cable faults form 440 volts to 400KV. Cable fault locator (Surge generator) has been primarily designed to produce high voltage surges for pre-location of under ground power cable fault in combination with Reflectometer T-510. 

• Brand Name: Fastball
• Color: Multicolor
• Condition: New
• Power Source: Battery
• Automation Grade: Automatic
• Application: Industrial Use, Fiber fault locator
• Feature: Easy To Use
• Operating Temperature: High Temperature
• Type: Cable Fault Locators
• Frequency: 10mw
• Country of Origin: India

• Country of Origin: India
• Type: Pen Visual Fault Locator
• Application: single-mode or multi-mode fibers
• Power: 10mw
• Product Dimensions: ‎8 x 5 x 7 cm
• Optimization: 2hz Glint
• Universal Adapter: 2.5mm