S-BLUE PUMP CO.,LTD Port Blair, Andaman & Nicobar Islands

1.High efficiency Energy saving : Compared with FSB Model , The Efficiency of IH Series Chemical Centrifugal Pump is greater than 3 - 5 % it is an good energy products . 2. shaft or bear seal : seal is filled materials r seal mechnical , two kinds of seal cover can interchangeably. 3.suspension componentes : Suspension components using universal design, high level of generalization, high reliability. 4. material : the main flow components selected stainless steel, which can meet the delivery of different medium, long service life. 5.Fully Seal Shaft : it is used seal and the "O" type sealing ring assembled on Shaft, to ensure that the shaft is not in contact with the medium, impove the working life. The general design, high level of generalization.. 6. Usage : IH Series Chemical Pump is selected interntional standard ISO2858-75 (E) made of ,it is approved the product which replace F pump hydraulic updated products by National Machinery Industry Ministry of the State Council , The hydraulic model and GB standards , advanced and reasonable, equipped with the power of energy -saving .it is than the original F type pump skills of nearly 25% strong interchangeability, convenient repair, fast operation. Widely used in chemical, petroleum, pharmaceutical, electronics, food, environmental protection, electric power, smelting, nonferrous metal, chemical synthesis and other fields. it is choose different mechanical seal or packing seal According to the working conditions .it is energy-saving products internationally recognized and recommended by the state, the seal size confirms to the ISO3069 standard. 7 ,working performance : Flow range:50 m 3 /h Head range :120m Rotating Speed n:2900r/min Medium temperature :-20 ~105 degree，Motor:37KW

we offer 80fzb-30l-fzb-full-f46-pfa-self priming centrifugal-pump. it is designed and manufactured depanding on international standard and conbine non-metal pump. pump body are metal inserts covered by fluoroplastic lining, the whole over-current components are manufactured by fluoroplastic alloy. the pump cover and impellers are overall fired- pressed by metal covered by fluoroplastic outside. the shaft seal use externally mounted advanced bellows mechanical seal. stator ring(a part of mechanical seal ) is made of alumina ceramics (or silicon carbide ) 99.9%, rotor ring is filled with ptfe materials, so it is has an strongly corrosio-rsistant, wear resistance and good tightness. inlet and outlet of pump are strengthened by cast iron to increase the pressure resistance. after the acutally application usage, we find that this pump has a lot of advantages, including corrosion-resistant, wear-resistant, high temperature resistant, non-aging, mechanical strength, smooth operation, advanced and reasonable structure, good tightness and easily to remove and maintain, long life. etc... products structure: usage: fzb fluoro plastic centrifugal pump is self-priming, you just need one time to fill liquid in pump when used for the first time. it is not neccessarily to fill liquid when you use it again. so it can reduce workload. it is widely used in transmitting strongly corrosion mediums, chemical, pesticides, acid and alkali manufacturering, paper-making, electronic, waste water treatment. the self-priming height depending on medium density between 2 m to 4 m. it is the best choose to replace heavy underwater pump. working temperature: -20 ~150 degree flow: 50m3/h head: 32m motor: 11kw

We offer wb2/wb2a pump parts of mechanical seal.it is structure with materal of ptee. It is can make up for pump shaft circular runout, single pump face seal packed , easily loading and unloading ,perfectly opearating status . carry with instruction line , which is located in middle of seal it have three materials of mechanical seal dynamic & static ring connect face according delivery medium 1,99% alumina ceramics 2,reaction sintered silicon carbide 3, pressureless sintering of silicon carbide application range : pressure : ≤0.5mpa operating temperature :-20-160 degree rotated speed :≤2m/s medium : acid , alkali ,oil ,macromolecule suspension liquid : if the medium contain granular , it is best choose of silicon carbide mechanical seal if the medium contain strongly alkali and hydrofluoric acid you 'd better to select pressureless sintering of silicon carbide mechanical seal

We offer 50zmd－30 fluoroplastic f46 magnetic self-priming pumps. Its has function of self-priming, self-priming height can reach up to 2 meter - 4 meter. it canceled the shaft seal because they are replaced by magnetic coupling without indirect transmission. the completely eliminate the phenomenon of drip. There are the best choices to eliminate pollution and create a energy-saving, environmental protection, leak-free factory. usage: it can be used to transmit corrosive and expensive liquid in special conditions that the liquid level is lower than the level of the pump mounting position. performance: working temperature: -20 ~150 degree flow: 12.5m3h head: 30m motor: 5.5 kw

Pump case: Ductile iron lined with fluoroplastic alloy (F50) teflon FEP (F46) Soluble teflon (PFA) Impeller: Ductile iron lined with fluoroplastic alloy (F50) teflon FEP (F46) solubleTeflon (PFA) Base plate: Cast iron Technology: It is metal casing lined with teflon, impeller and pump cover integrally Sintered and pressure molded by metal inserts with teflon outside, Externally Mounted bellows mechanical seal for shaft seal, stationary seal ring made of 99.9% Aluminum oxide ceramics or silicon carbide, rotating seal ring made of tetra fluoride Packing material or silicon carbide. It resists corrosion, abrasion, high temperature and aging, and has high mechanical Strength, no toxin decompounding, and wide range of service temperature. Application: It is widely used in the industries of chemical, pharmaceuticals, pesticides, and Papermaking for liquid delivery, wastewater treatment, acidification and other Processes. Performance Range: Operating temperature: -112 - +302F - 20 C-150 C Flow: 6mh Head 20m Motor is your selected installation parts. :1.5KW

FSB fluoroplastic alloy centrifugal pump are manufactured by special pump processes. The pump body, impeller, pump cover are high temperature die formed Parts which are metal inserts covered by fluoroplastic outside. The seal are mechanical seal which are adjustable PTFE Bllows. These series pump are divided into two structural forms: Short bracket FSB (D) Long bracket. It has much feartures of reasonable design, compact structure, simple operation, easy maintenance. Etc. Working temperature: - 20 -150 degree Pump Flow: 100 m3 h Pump Head: 32 m Motor: 15kw Normally motor or Ex motor. Usage: FSB Series fluoroplastic centrifugal pump are widely used in the acid and alkali manufactured, automotive derusting, pesticides, electronic, organic solvents, stron oxidizing agents, waste water treatment and other industries.

we offer zcq 5040160 zcq self priming magnetic leakless seal used in chemical dosing-pump. Commodity : Self Priming Magnetic Pump Model No : ZCQ Magnetic Pump Flow :12.5 m3/h Head:32 m Power: 4kw,4Meter Feature : It is also called magnetic drive pump, using modern magnetic theory. Magnetic pumps adopt internal and external magnetic steel to delivery. This pump are remodeled based on the Series CQ magnetic pumps with the recent advanced technologies of the field. The product combines the advantages of the magnetic pumps such as fully sealing and corrosion resistance, and the features of self-priming pumps such as simple line structure without bottom valve and easy operation without filling liquid for being primed. The maximum priming height is 4 m. Application : The self-priming magnetic pumps are widely used in the petroleum, chemical, pharmaceutical, electric plating, dyeing and printing, food, agrochemical, and metallurgical industries for pumping acids, bases, oils, valuable liquids, toxic or volatile liquids, especially flammable, easy to leak and explosive fluids.

We offer cqb 50-32-125 cqb tiny stainess drive pump. Flow : 12.5m3h head : 20m efficiency : 22 % npsh :6.0 m rotating speed : 2900rmin motor horse power :3kw application field : acid ,alkali , strongly oxidizing agent, pervaporation membrane manufactured . Our magnetic drive pump features: 1. Acid alkali resistant 2. Anti corrosive . 3. 100% without leakage 4. Self-priming height is catch up to 7 m 5. International advanced manufactured handicraft technology : api610 standard , iso2858. 6. Quality assurance : iso9001 :2008 certificate 7. Ce certificates : ihf fluoroplastic centrifugal pump ,cqb magnetic drive pump. 8. Famous brand :" south " 9. Market share: 80% market share in chemical fluoroplastic pumps field in domesitc . 20 % market share in global world.

We offer cqb 65-50-125f cqb fluoroplastic magnetic drive pump. It is an single -stage, single-suction, magnetic-driving centrifiugal pump, which application modern magnetic mechanics principle, implementation of a chemical process pump without contacting the indirect transmission by using permanent magnet. When the external rotor motor ( outside magnetic steel ) drives assembly rotates through the magnetic line of force within the rotor drive isolation kit (inside magnet )synchronous rotating assembly with the impreller, closed in the static dielectric isolation kit so that no leakage of the purpose of pimping medium, solve the mechanical transmission pump seal leakage. it uses static seal instead of the dynamic seal so that it can keep the flow components in the seal station. It solves the other pump problems like running, emit, drip, and so on. it is an elimination of environmental pollution, it best choose to creat energy, envirnmental protection, saftly without leakage factory. performance: working temperature: -20 ~150degree flow: 25m3h~30m3h head: 20m competitive advantages new product, customer's design and logo are welcome, competitive prices, earth-friendly products

We offer UHB-ZK100100-40 Uhb-Zk Corrosion Wear Slurry Pump Without Motor. The Overflow components adopt the steel liner ultra-high molecular polyethylene manufacturing, This pump wear resistance is 4 times of PTFE and 6-7 times of Carbon steel, Stainless steel. Corrosion resistant, acid or alkali liquor slurry are applicable. No adhesion, anti adhesion ability and samilar with PTFE material. Low friction coefficient, having self lubricity. Safe and reliable, toxin free, suitable for use in the food industry. Working Temperature: -20 - 80 degree Flow: 100m3h Head: 40m Applicable medium: Concentration of Sulfuric acid and nitric acid are below 80% and below 50% respectively. hydrochloric acid, th concentriation of each liquid alkali, and mine with corrosive slurries and pulp, namely applicable clear liquid also applicable slurry.