Acrylic Wall Putty Dealers in Pune

Surface Preparation & Application: Sand the surface with Emery Paper 180. Wipe clean with soft cloth. Apply a coat of Indigo Water Thinnable Cement Primer. Allow 6-8 hours for drying. Smoothen the surface by filling cracks with thin coats of Indigo Acrylic Wall Putty and allow 4-6 hours to dry. Sand with Emery Paper 180 and wipe clean. Apply another coat of primer. Sand the surface with Emery Paper 320. Advantages Extra Smooth finish Excellent adhesion strength with wall & paint Alkali resistant Fast drying

plaster spraying allows a plasterer to skim a drywall more than five times faster than using a hand float to apply it. Although classic gypsum-based plaster can be sprayed if it is "spray grade," most plaster sprayers prefer the organic-based pre-mixed plaster packaged in a plastic bag because the plaster spraying machine does not need to be cleaned out after the job is finished, providing that plaster is kept moist. The pre-mixed plaster also has the advantage that any surplus can be recycled, almost eliminating waste, and plasterers do not need to haul water and mix the plaster from powder. A drywall skimmed with pre-mixed plaster can be painted in less than 24 hours, depending on the ambient temperature and humidity.

acrylic waterproofing coating, waterproofing coating, polymer emulsion

Acrylic Putty is PVA copolymer based homogenous smooth acrylic putty used on the interior surfaces of concrete, cement plaster, gypsum board and plywood. It gives a smooth and leveled surface suitable for subsequent coats. It contains antifungal and antibacterial additives.

• Coverage** surface by Brush.: On Smooth and non-absorbent surface. 20 Sq.ft/ per Kg.
• Drying Time: Surface Dry: 30 minutes.
• @27° ± 2°C & RH 60 ± 5%: Recoating: Min. 4 - 6 hrs.
• Gloss Levels/ Sheen levels: Matt
• Thinning: If required with water.
• Stability of Thinned Paint.: Use within 24 hrs.
• Shelf life: 1 year from date of manufacture in original tightly closed. Containers away from direct sunlight and excessive heat.

PERFORMANCE FEATURES & BENEFITS 1. Smooth and pleasing finish.2. Ease of application.3. Accelerates speed of work.4. No undulations.5. Optimum Performance.   RECOMMENDED SYSTEM FOR APPLICATION Ensure the surface is clean; dry free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials by rubbing down using suitable abrasive paper and thereafter wipe off. Treat fungus affected area. Allow to react for 6 – 8 hrs. For new masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces. CLEANING Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use Damp Block to limit further dampness. In case of dents and holes use Laxmi spray plaster/wall putty or white cement and fine sand in the ratio 1: 3.

water proof paint, Wall Paint, Acrylic Paint, Paint, Asian Paints

Glorious Paints Premium Coat Acrylic Primer, Glorious Paints Seasons Emulsion

Acrylic Primer, Cement Paints, Enamel Paints, Acrylic Coatings

modified acrylic waterproofing coatings