Actuators Valves Dealers in Pune

Forbes Marshall Piston Actuated Valves are 2-port pneumatically actuated OnOff valves for use on steam, water, air, oil and gases. A pneumatic signal acts on the actuator piston to open or close the valve with a spring return action. The valve plug has a PTFE soft seal to provide a tight shut off. Forbes Marshall Piston Actuated Valves are available in Normally Open, Normally Closed and Bi-directional Normally Closed configuration.

The "Emtork" Electric Actuators are electromechanical units used for operating the final control elements like valves or dampers to control the flow of fluids flowing thru the pipes or ducts. The specific advantages of using these units are : Ease of operation. Remote control facility. Proportional action of final control element in close loop system. Attaining & holding the desired preset position of the valve/damper. Various indications & alarms are available on the remote control panel & also on the unit. Emergency manual operation possible in case of power failure. Works on most convenient & easily available source of energy i.e. electricity. Models available to cover wide range of valves & dampers. Units with Integral starter will save cost of cables. Units with Electronic controller will facilitate field programming. Design The Basic design of the Emtork Actuator consists of an electric motor, reduction gear unit and control compartment. Various models have been developed to suit operating torque, speed, process parameters, area of operation etc. Additional supplementary spur and worm gear boxes are offered to get higher operating torques and quarter turn motion. Linear motion actuators have been developed to impart the required thrust to operate globe valves. The models are available for on / off and regulating duly and also for hazardous area application.

We are ranked amongst the reliable importers and suppliers of electric actuated valve. Procured from the reliable vendors, these electric actuated valves come with a characterized control insert to provide equal percentage flow for stable and accurate control. Available under the brand name of 'tork" electric actuated valves can be availed in various specifications, at very reasonable prices. attributes precision engineeredfine finishingbetter qualitylong lasting performance

• Material: Alloy Steel, Carbon Steel, Forged Steel, Stainless Steel
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Weight: 10-20kg, 20-30kg, 30-40kg, 40-50kg
• Color: Black, Green, Grey, Sky Blue, White
• Driven Type: Pneumatic
• Feature: Blow-Out-Proof, Casting Approved, Durable, Good Quality, Investment Casting
• Type: Pneumatic Actuated Valves
• Pressure: High, Low, Medium
• Condition: New, Used

• Brand Name: INTELLO
• Country of Origin: ITALY
• Material: m

na

Automation tekniks is one of the reliable electric actuators manufacturers, exporters & traders. We offer electric actuators for high pressure globe & gate valves for on / off and regulating duty applications. They can be mounted directly on valves or the motion can be transmitted thru linkages depending on site conditions. The actuators are available with 230 / 110 vac v ac 1 phase or 415 v ac 3 phase motors to suit various valve sizes and operating pressures. The required standard and optional accessories are available to meet the specific process requirements. The service back up is also available for commissioning, to over-come initial troubles, and also to calibrate the unit with dcs / qcs compatibility. technical specification

• Structure: Butterfly
• Voltage: 415V AC
• Power: Three Phase
• Pressure: Medium Pressure
• Actuator Type: Electric Actuator
• Brand: Flowtork
• Stroke Length: 3-29/32"
• Valve Motion: Rotary Motion Valve

• Color: IPC STD
• Size: 2
• Power: Hand Wheel / Gear Wheel Operated/Automated
• Pressure: PN10-50/#150/#300

Butter􀀐y valves are quarter turn rotary motion valves used for throttling as well as on-o􀀛 purposes. One of most widely used valves across industries, butter􀀐y valves are compact and very easy to operate. Butter􀀐y valves o􀀛er several advantages including quarter-turn operation, cost e􀀛ective solution and good control capabilities. These valves are widely used for Chemicals, Petro-chemicals, Food & various other sectors.  

• Packaging Type: Box
• Brand Name: Marsh
• Material: Cast Iron
• Country of Origin: Made in India
• Valve Size: 1000 mm
• Media: Water

Design Standard : IS 9890-1981Pressure Testing : BS 6755 Part I/API 598/IS 6157-1981Flange Dimensions : ANSI B 16.5Face to Face : ANSI B 16.10/IS 9884-1981Screwed Dimensions : ANSI B 1.20.1/BS 21/IS 554Socket Weld Dimensions : ANSI B 16.11/BS 5351/ IS 4712Butt Weld Dimensions : ANSI B 16.25/BS 5351/ IS 11790

Valve Type PAV - In normal condition, 'A' port is closed and 'AB' port is connected to 'B' or 'B' port is connected to 'AB' port. On receiving pilot pressure, 'A" port is connected to 'AB' or 'AB' port is connected to 'A' closing port B. Piston Actuated Valve Type 6619E - Normally 'B' port is closed and 'A' port is connected to 'AB' or 'AB' port is connected to 'A'. On receiving signal 'A' port is closed and 'B' port is connected to 'AB' or 'AB' port connected to 'B'.   Applications of Piston Actuated Valve: Boiler feed water tanks Process hot water tanks Washers in textile industries

TV/HAT (Tube Valve/Heat Actuated Trap) valves are ideal for use in conjunction with tracer tubing and tracing systems using pretraced tubing bundles. These versatile valves are compatible and are made to be used in combination with the TV series valves as well as standard tubing and tubing fittings. TV/HAT valves are ideal for replacing conventional steam traps on winterization tracing, instrument tracing, condensate return system freeze protection, tracing for processes under 150°F (65°C), and other applications requiring in-line flow controlbased on temperature.   Features Compact, low mass for fast response Corrosion resistant - Long service life Stainless steel body, fittings, spring and plug Ram-type plug for tight reliable shutoff Eliminates live steam losses Operates in narrow temperature band Downstream actuator for greater sensitivity Unaffected by pressure variations Wide choice of set points Easy to install Operates in any position

We offer Actuated Class 150 Flanged Ball Valve. Product feature extra high cycle life provided by spherical segment stem split body design facilitates inspection and repair. Investment cast body construction blow-out proof stem anit-static device iso 5211 mounting dimension for easy automation fire safe in compliance with api 607. Triple stem sealing above 2" size air cushioned handle sleeve for confortable manual operation.

• Brand Name: Saad
• Material: CI, CS, SS
• Packaging Type: Box
• Usage/Application: Air, Water, Oil, Gas
• Application: Industrial
• Power: Actuator
• Size: 40 to 600 mm
• Voltage: 230 V

• Brand Name: Belimo,Honeywell,Siemens
• Power Source: Electricity
• IP Rating: IP54
• Nominal voltage: AC/DC 24 V
• Nominal Torque: 5 Nm
•  :  

• Application: Other
• Number Of Way: Other
• Pressure: Other
• Pattern: Plain
• Color: Other
• Voltage: 110V,220V,380V,440V
• Port Size: Other
• Type: Electric Actuators
• Certificate: Other
• Material: Aluminum,Brass,Carbon Steel,Stainless Steel,Other
• Structure: Other
• Country of Origin: India
• Power: Electronic

Electric Actuators

High Pressure Ball Valve With Pneumatic Rotary Actuator

piston actuated valves, compressed air drain traps

Electric Actuators, high voltage equipment, Lightning Conductors, fuse base

Pneumatic Actuated Butterfly Valves, Gearbox Operated Butterfly Valve

Electric Actuator, Industrial Pressure Transmitter, Circular Chart Recorder

Electric Actuators, cartesian robot

Actuator Valves, LPG Industrial Burner, Air Pressure Switch

Actuated Diaphragm Valves

PT61 Pipeline Accessories

Control / Ball Valve Actuators, hand lever valve

Actuators Ball Valve, Custom Manifolds, Investment Casting Machines

Electric Actuators, Pneumatic Actuators, Valve Automation System

Electric Actuator, Actuator, Fuse Switchgear, Switch Bed Hanging Cord