Air Eliminators Dealers in Pune

The combination Strainer cum Air Eliminator ensures removal of solid impurities, air or vapour from the liquid before it enters the Flow Meter. It is an essential accessory for trouble free & accurate Flow Meter operation.   DESIGN FEATURES   Low pressure drop due to large filter element area Easy filter element removal for maintenance High venting capacity air eliminator PRINCIPLE OF OPERATION   The Strainer cum Air Eliminator is fitted on C35 flow meter’s inlet side. The strainer consists of a fabricated body, having a horizontal offset between the inlet and outlet flanges. The wire mesh filter element is positively clamped by the end cover. A drain plug is provided to facilitate servicing. Liquid impurities get filtered on passing through the filter element and clean liquid flows through the flow meter. For new installations, it is advisable to first thoroughly flush lines before installing the flow meter. Periodic strainer basket inspection and cleaning is necessary to prolong the life of the flow meter. The air eliminator is mounted along side the strainer body. It consists of a stainless steel float connected to a pilot valve via multiple linkages. When air collects in the air eliminator, the buoyant force acting on the float reduces, the float drops down along with the pilot valve connected to the linkage and the air escapes through the main valve. As liquid rises in the air eliminator, the float rises to lift the pilot valve, thereby closing the air release opening of main valve.

• Sizes: 15mm-50mm
• MOC: CI/CS

UKL Air Eliminators are meant to automatically remove air from Liquid lines.Air has to be removed because: air in liquid line cause of two phase flow, water hammering as well as prevents smooth flow of fluid or causes air locks.Air also acts as an oxidizing agent and causes corrosion and weakening leading to damage and leakage in pipes and related equipment. Solubility of air in water is high at low temp, but on heating solubility decreases, and release air from water and flows with water. Mainly this happens in cooling water circuit. Function of Air elimination can be achieved by a mechanical Float operated Trap, with just a position change of its Float assembly. This change in the float assembly position now holds back the liquid but allows Air to be vented out as against the normal Float trap holding steam and discharging condensate.

Air Eliminators are ideal for air removal from liquid lines. Presence of air and other non-condensible gases in liquid lines can result in a number of problems. Removal of such gases from the system is hence essential.

Air Eliminator, Pumps, Nozzles, Strainers, Flowmeter, Flow Sensor

• Strainer cum air eliminator: 16500.00INR

It is a liquid filtering equipment having different size mesh to separate sediments and foreign undissolved particles. It separates air entrapped in liquid. Pure liquid fed to flow meter.

Float Type Air Eliminator, Strainer Air Filter

Air vapour Gas Eliminator, Condensate Lifting Pump