Alloy Cast Steel Roll Dealers

• Thickness: 40-50mm, 50-60mm, 60-70mm, 70-80mm
• Certification: CE Certified
• Length: 3000-4000mm
• Application: Industrial Use, Manufacturing
• Grade: AISI, ASTM
• Color: Silver
• Feature: Color Coated, Corrosion Resistant, Fine Finish, Optimum Quality
• Finishing: Polished

These rolls are statically casted and undergo a special high temperature heat treatment process. Bentex have been able to offer optimum quality Adamite Rolls to our valuable customers. These rolls are suitable for rolling medium and heavy sections where resistance is very important along with considerable amount of strength & toughness. The offered rolls are available with us in customer stated specifications. Details: Extra carbon and special alloy give it extra wear resistance & Strength. Size: As per Requirement of Steel Rolling Mill Ultrasound Tested to check any structural defect.

These Rolls are special hyper-eutectoid steel rolls alloyed with Nickel, Chromium & Molybdenum. The extra Carbon and special alloys give extra wear resistance and strength. These rolls are statically cast and undergo a special high temperature heat treatment process of double annealing followed by tempering cycles to give a micro structure consisting of fine pearlitic matrix with spherodised / broken carbide.Application : These Rolls are suitable for rolling medium and heavy sections. These rolls are also used for roughing stands of strip mill.

We are offering adamite steel rolls. We specialize in all kinds of adamite rolls having diameter upto 1500 mm and length upto 10000 mm in all international standards. We provide high quality as per design and specification of customers requirements.

We provide highly efficient Adamite Rolls in the market. Adamite is a material, mechanical properties and carbon content of which stands between steel and iron. Owing to its alloy elements such as NiCrMo etc. there are some amount of carbide in the matrix and because of certain special heat treatment technology, high wearability, good toughness and excellent resistance to fire crack are obtained. The advantage of Adamite Rolls is that almost no hardness gradient in the working layer is required.

• Country of Origin: India
• Length: 1-1000mm
• Application: Industrial Use
• Feature: Color Coated, Corrosion Resistant, Fine Finish
• Finishing: Polished
• Certification: ISO 9001:2008

Size Limitation Maximum : 600 mm diameter Minimum  : 150 mm diameter   Lenth - Maximum : 1200 Minimum   : As per your requrment 

• Thickness: 10-20mm
• Certification: ISI Certified
• Application: Industrial Use
• Color: Silver
• Finishing: Polished
• Type: Adamite

We bring forth best quality Adamite Steel Rolls that are known for superior quality and high performance among the clients. Avail our Adamite Steel Rolls in varying diameters and lengths to meet the demands of various industries. Available in Diameter up to 1500 mmLength up to 11500 mm

The company is the foremost Manufacturer and Supplier of Adamite Steel Rolls. Adamite Steel Rolls are basically alloy steel rolls (a kind of high carbon steel) having hardness ranging from 40 degrees shore c to 55 degrees shore c with carbon percentage ranging from 1.35% to 2%. These Adamite Steel Rolls are primarily supplied for initial stands where wear resistance is important along with considerable strength and toughness. Adequate heat treatment is necessary to achieve requisite wear resistance along with strength and toughness. Adamite Steel Rolls contains carbides and therefore the wear resistance is obviously improved as compared with hypo-eutectoid and eutectoid steel. To obtain excellent comprehensive properties modification is conducted with special rare-earth or other powerful agent, then through a multi-stages heat-treatment process, that consists of briquette carbides dispersed in the matrix of palletized pearlites can be gained, which perform well on strength, toughness and hot crack resistance. Apart from that a vast range of S.G Iron rolls is also available in a range of: 50, 60, 65, 70, 75 and 80 shore D. These Adamite Steel Rolls offer higher durability.

Rolling Mill Rolls are required to cast the metal into thin sheets. We offer a range of Rolling Mill Rolls that are manufactured with high-grade metals or alloys using advanced technology. These Rolling Mill Rolls have hard structure and can withstand high heat as well. Some of the Rolling Mill Rolls, offered by us, are Adamite Roll, Alloy Steel Roll, Cold Rolling Mill Roll, etc. Attributes : Corrosion resistance Ruggedness Smooth finish Durable

• dull silver: grey

We are offering adamite roll. alloy steel base rolls (adamite) or cr-ni-mo alloyed. the high mechanized strength of typical steel & wear resistance property of cast iron are combined in these rolls by means of special heat treatment cycles.in these rolls the graphite is in the from of spheroids produced by suitable inoculation. Most nodular iron rolls are chill cast resulting with a hard working layer and softer nects. the alloy content is accurately controlled to give fine and well distributed graphite nodules and refined carbide in generally paralytic or benetic / martens tic matrix. the higher alloy content cr-ni-mo makes the rolls tougher & wear resistant.

• Thickness: 10-20mm
• Length: 1-1000mm
• Application: Industrial Use
• Color: Silver
• Finishing: Polished
• Feature: Waterproof
• Material: Stainless Steel

Adamite Rolls are alloy steel rolls having hardness ranging from 40 degrees shore C to 55 degrees shore C with carbon percentage ranging from 1.35% to 2 %. Adamite rolls are casted with Cr-Ni-Mo alloys and after casting the Rolls annealing the Material. Adamite Rolls having highly demand in section mills.

Raw material that is sourced from the reliable places is used as input in the production procedure. In order to make high quality range of products, we check it for quality prior to sourcing. We have established a state-of-the-art warehouse facility and equipped it with the latest inventory control system. Thus, we can take care of seasonal supply, wholesale supply, and quick supply among others. Features: High grade metal Precision made Dimensionally stable

Adamite Rolls are special hyper-eutectoid steel rolls alloyed with Nickel, Chromium & Molybdenum. The extra carbon and special alloys give it extra wear resistance and strength. These rolls are statically cast and undergo a special high temperature heat treatment process followed by tempering cycle to give a micro structure consisting of fine pearlitic martix with spherodised broken carbide. These rolls are suitable for rolling medium and heavy Sections where resistance is very important along with considerable amount of strength and toughness. These rolls are also used for roughing stand of Strip Mill.

These Rolls are special hyper-eutectoid steel rolls alloyed with Nickel, Chromium & Molybdenum. The extra Carbon and special alloys give extra wear resistance and strength. These Rolls undergo a sophisticated multi-stage high temperature Heat - Treatment (Double Annealing followed by tempering cycle) to give the combination of hardness, toughness and wear resistance required for the particular application.Application : These Rolls are suitable for rolling medium and heavy sections. These rolls are also used for roughing stands of strip mill. 

Multi Metal Rolls is Manufactures, Supplier and Exporters of Complete Steel Rolling Mill Rolls like Forged Rolls (for all Composition and Grade) ,Forged Shafts, Adamite Iron Rolls, S.g. Iron Rolls, Indefinate Chilled Rolls, Definate Chilled Rolls, High Chromium Tube Mill Rolls and Straightening Machine Rolls for Manufacturing Tmt Bars, Angle, Channel, H-.beam, Steel Pipe and all Type of Steel Products.

These rolls are manufactured by static pouring.After casting the rolls are subjected to a series of heat treatment cycle to obtain the final desired properties of the rolls.

• Adamite Steel: Centrifugal, Static Casting and Static Monoblock Cast
• Hardness: 40 - 45 Shore°C

  adamite is a matex`rial , mechanical , chemical properties and carbon content of which stands between steel and iron along with its alloy elements such as ni, cr, mo etc. adamite rolls are alloy steel rolls (a kind of high carbon steel) having hardness ranging from 40 degrees shore c to 55 degrees shore c with carbon percentage ranging from 1.35% to 2%. adequate heat treatment is very much necessary to achieve requisite wear resistance along with strength and toughness the roll contains carbides, and therefore the wear resistance is obviously improved comparing with hypo-eutectoid and eutectoid steel an outstanding feature of adamite rolls in that the inner hardness is about the same as that of the surface. Adamite steel rolls are classified as ordinary to obtain excellent comprehensive properties modification is conducted with special rare-earth or other powerful agent, then through a multi-stages heat-treatment process, that consists of briquette carbides dispersed in the matrix of palletized pearlites can be gained, which perform well on strength, toughness and hot crack resistance.   these rolls are used in pre-finishing to polishing stands in structure mills where wear resistance is very important along with considerable amount of strength and toughness.

ADAMITE ROLLS/RINGS : Adamite Rolls are basically alloy steel rolls (a kind of high carbon steel) having hardness ranging from 40 degrees shore c to 55 degrees shore c with carbon percentage ranging from 1.35% to 2%. these rolls are primarily supplied for initial stands, where wear resistance is important along with considerable strength and toughness, adequate heat treatment is very much necessary to achieve requisite wear resistance along with strength and toughness, the roll contains carbides, and therefore the wear resistance is obviously improved comparing with hypo-eutectoid and eutectoid steel, to obtain excellent comprehensive properties modification is conducted with special rare-earth or other powerful agent, then through a multi-stages heat-treatment process, that consists of briquette carbides dispersed in the matrix of palletized pearlites can be gained, which perform well on strength, toughness and hot crack resistance. Full range of rolls and rings are available for structure mills,Adamite barrels are also available.  

We are engaged in offering superior quality Alloy Steel Rolls, which are manufactured in accordance with set industrial standards. The Alloy Steel Rolls offered by us, are highly appreciated for their high efficiency and tough construction. Moreover, the clients can avail Alloy Steel Rolls at market leading prices. Materials Used : M.S steelChemicals such as Chromium, Molybdenum Nickel, Manganese, Silicon, Vanadium Salient Features : DurableHigh performanceDimensionally accurateSturdy construction Widely Used For : Hot rolling applications

These rolls undergo a sophisticated multi-stage high temperature heat - treatment (double annealing followed by tempering cycle) to give the combination of hardness, toughness and wear resistance required for the particular application. The lower carbon grades will have a structure consisting offerrite arid fine pearlite which, as the carbon content is raised, transitions to a fully pearlitic structure and on to one containing free carbide in a matrix of fine pearlite and even some bainite for the highest carbon grades. All rolls of this material are statically tangentially single poured.

We are a well-known Manufacturer, Exporter and Supplier of Adamite Rolls in Mandi Gobindgarh. The Adamite Rolls are special hyper-eutectoid steel rolls alloyed with nickel, chromium and molybdenum. The extra carbon and special alloys give the Adamite Rolls extra wear resistance and strength. The Adamite Rolls are statically cast and undergo a special high temperature heat treatment process followed by tempering cycle to give a micro structure consisting of fine pearlitic matrix with spherodized/broken carbide. The Adamite Rolls are suitable for rolling medium and heavy sections where resistance is very important along with considerable amount of strength and toughness. The Adamite Rolls are also used for roughing stand of strip mill.

To give the best quality products we have setup faclities for Normalizing, Annealing & Heat treatment and are also fully equipped with all testing facilities of Physical, Chemical & Ultrasonic testing. Each of the product undergoes ridged testing and inspction at various stages from Raw Meterial to Finished products. We can forge a single piece fo 50 Kg to 6 Tonnes & in length upto 8 mtrs ( 10 mtrs. on special request.)

Adamite Rolls are basically alloy steel rolls (a kind of high carbon steel) having hardness ranging from 40 degrees shore c to 55 degrees shore c with carbon percentage ranging from 1.35% to 2%. these rolls are primarily supplied for initial stands, where wear resistance is important along with considerable strength and toughness, adequate heat treatment is very much necessary to achieve requisite wear resistance along with strength and toughness, the roll contains carbides, and therefore the wear resistance is obviously improved comparing with hypo-eutectoid and eutectoid steel, to obtain excellent comprehensive properties modification is conducted with special rare-earth or other powerful agent, then through a multi-stages heat-treatment process, that consists of briquette carbides dispersed in the matrix of palletized pearlites can be gained, which perform well on strength, toughness and hot crack resistance.     Adamite is a material, mechanical, chemical properties and carbon content of which stands between steel and iron, along-with its alloy elements such as Ni, Cr and Mo etc. due to its consistent hardness & material properties surface to core increase its bite capability, there are some amount of carbide in the matrix and because of certain special heat treatment technology because of its high wearability, good toughness and excellent resistance to fire crack, makes it ideal rolls for roughing stands   Applications: :: Adamite Rolls for Bar Mill :: Adamite Rolls for Profile Mills   :: Adamite Rolls for Universal Mill       :: Adamite Rolls for Girder Mills :: Adamite Barrel Rolls                       :: Adamite Rolls for Roughing Stand :: Wire Rod Rolling Mill Rolls               :: Adamite Straightening Rings   :: Adamite Rolls for Section Mills         :: Adamite Rolls for Structure Mills Manufacturing Range: Roll Diameter            Upto 24 inches or 610 mm Max Roll Length               Upto  48 inches or 1220 mm Max 3 MT single piece under the scope of manufacturing     Material Specifications Process Hardness Adamite Steel                       Centrifugal Casting     45 - 55 Shore°C Adamite Steel                       Static Casting              45 - 50 Shore°C Adamite Steel                       Static Monoblock Cast 40 - 45 Shore°C