Analogik Electronic Corporation Aundh, Pune, Maharashtra

INTRODUCTION   Analogik universal calibrator is very useful tool to calibrate many types of process control instruments which accepts mV and mA and resistance. The universal calibrator is designed to give highest stability and accuracy. The calibrator can be used for lab or inhouse purpose as well as to used on field. This is very useful tool for calibration of instruments, commissioning, quality assurance and fault findings.     Features   Green display 1/2" height. High accuracy & reliability. Easy to operate.   FUNCTIONAL DESCRIPTION Power on switch - Powers the instruments with indication. Coarse & Fine Pot - Both the potentiometers are multiturn helipots & used to adjust the correct value on display. Res. Adjust Pot - Mult! turn Helipot to adjust the correct value of resistance. Read / Source Switch - Push to ON switch. When in press condition parameters will be in READ mode when unpress mV / mA in source mode. mV / mA switch - This switch selects the parameter mV or mA either read or source. RTD Switch - When this switch is pressed display shows temp, in °C and as per resistance chart (DIN - 43760) corresponding resistance will be source when switch is relased.   When switch is in press condition output at R and B/C terminals is in open (infinity resistance) mode. Display - Green, 1/2" height, common to read all the parameters   CALIBRATION EQUIPMENTS mV / mA Source RTD Simulators mV Source pH Simulator Conductivity Simulator RTD Simulator with Indication   Portable Thermocouple Calibrator Loop Analyser  

Analogik universal calibrator is very useful tool to calibrate many types of process control instruments which accepts mV and mA and resistance. The universal calibrator is designed to give highest stability and accuracy. The calibrator can be used for lab or inhouse purpose as well as to used on field. This is very useful tool for calibration of instruments, commissioning, quality assurance and fault findings.

Cable Type : Straight

GENERAL DESCRIPTION Signal isolators are used to provide isolation between both field DC signals and final control element. The instrument provides 1.5 KV DC galvanic & opto isolation between the input signal & output signals. These instruments accepts 0/4 to 20mA singal proportional to input.The high accuracy, linearity & very low temp. drift is the added feature. The instrument is housed in a std DIN rail housing with zero, span adjustments are user accessible. The instrument in packaged in plastic DIN rail also suitable for wall mounting. 24v DC output is optional to power field transmitters. Dual I/P & Dual 0/P version available. Also 8 I/P and 8 O/P version in DIN rail mounting available. Any I/P & O/P configuration as per system requirement can be given.     FEATURES   Eliminates ground 100 P problems. Duel l/P-Dual O/P, Four I/P- Four O/P versions available. Also 81/P-8O/P version available. All I/P-I/P, I/P-O/P & O/P-O/P isolation (Threeport isolation)    

Communication LED indicator upto 256 multidrop modules per serial port. Transient suppressors on RS 485 communication line RTS & CTS controlled. On - line module insersion & removed. Baud rate - setting not required.

  APPLICATIONS Essential tool for quality control, R & D & preventative maintanance. Use to test the maximum rise of temp, of heat sink, transformers & heating Cemps in R & D.   ACCURACY COLD JUNCTION 0.25 % of F.S. COMPENSATION Built-in. OPERATING TEMP & HUMIDITY 10 to 50 °C 90% Rh N. C. max. SENSOR Pt-100, Fe-con, Cr-AI T/C. DATA HOLD By Push Button - optional POWER ON By Push Button FEATURES   3 1/2 digit or 4 1/2 digit LCD Indication. DATA HOLD BY PUSH Button - optional. Long battery life. Compact size-easy to use. Immersion, tubular, leaf, bow type sensors available. Covers-200 to +1200 °C temp, range. 9V DC Battery Operated.    

Input : Pt-100, Fe-con, Cr-AI T/C.

GENERAL DESCRIPTION Analogik PH meter and transmitter incorporates the latest high technological advancements. It has very stability, reproducibility & contineous duly cycle. The instrument having very high input impedance advanced (MOS-FET butter OP-AMP) The instrument accepts all types of PH electrode. Auto / manual temp, compensation facility is available. The instrument indicates PH by 3 1/2 digit LED / LCD display. FEATURES Manual / Auto temp, compensation by pt-100 sensor. Direct indication of PH/ mV and temp, by LED/LCD displays. Slope control for correcting electrode slope. Asymetry control to eliminate ageing offect. 0 / 4 to 20 mA output into 500 V incase of PH transmitter. CONSTRUCTION & OPERATION The glass epory, green masked, PCB with high quality components soldered gives the drift free performance. The mV signal from PH electrode is directly given to high I / P impedance buffer amplifier and then this signal is processed. The auto/manual temp, compensation circuit is added at this stage & signal is given to DPM / V to I connector. Thus we get PH indication or 0 / 4 to 20 mA signal proportional to input pH. APPLICATIONS pH meter and PH transmitter are commonly used in many industries & plants. Used in water treatment plants, Power Station, Sugar Mills, Steel Plant, Paper Industry, Chemical, Petro Chemical, Food, Fertiliser, Soft Drink Industries. SPECIFICATIONS pH INDICATOR pH TRANSMITTER RANGE O to 14H. 1999 mV Oto14PH. DISPLAY OUTPUT 3 1/2 digit LED or LCD 3 1/2 digit LCD-local indication optiona 0/4 to 20mA proportional to 0 to 14 PH. ACCURACY 0.25% of F. S. 0.25% of F. S. TEMP.Compensation Automatic with pt -100 manual by pot Oto130°C. 0 to 130 °C. Automatic only. INPUT IMPEDANCE SUPPLY >1012Ohms. 9 VDC, 230 V AC, 50 Hz 1 PHASE >1012Ohms. 9 VDC, 230 V AC, 50 Hz 1 PHASE SLOPE ADJUSTMENT 90 to 110% at 25 °C. 1 90 to 110% at 25 °C. 1 ASYMETRY ADJUSTMENT 1 PH. 1 PH. OUTPUT LOAD - 500 V Max. RECORDER OUTPT  

We are dealing in loop powered indicators, The loop powered indicators are designed to display any process parameter like temp, flow,pressure,ph & others. These instruments accepts, 4 to 20 mA DC signal and generates the power from the signal it self. No external power or battery is required.The loop powered indicators are available in flame proof, weather proof, general purpose housing with wall mounting, panal mounting & 2" pipe mounting types. The CMRS certificates as per IS 2148 for flame proof versions are also available with the instrument. The state-of-the art of technology to display the parameter with high accuracy & linearity & low temp.Drift is employed. The range & decimal point are selectable on site with the help of DIP switch.

GENERAL DESCRIPTION The loop powered indicators are designed to display any process parameter like temp, flow,pressure,ph & others. These instruments accepts, 4 to 20 mA DC signal and generates the power from the signal it self. No external power or battery is required.The loop powered indicators are available in flame proof, weather proof, general purpose housing with wall mounting, panal mounting & 2" pipe mounting types. The CMRS certificates as per IS 2148 for flame proof versions are also available with the instrument. The state-of-the art of technology to display the parameter with high accuracy & linearity & low temp.Drift is employed. The range & decimal point are selectable on site with the help of DIP switch. FEATURES Range & Decimal point field selectable by DIP Switch. No need of external power. High accurancy & linearrity and low voltage drop. Flame proof, weather proof, Genaral purpose versions available. High accuracy & linearity. Low loop voltage drop. CONSTRUCTION & OPERATION The glass epoxy, Green mask with high quality component board is mounted on brass studs. The instrument is mounted on a MS plate & this plate with 2" U clamps are fitted on 2" pipe. DIP switch & LCD are visible from outside to adjust & read the ranges. Zero, span trimpots are accessible from outside for ON - line calibration for flame proof versions. The 4 to 20 mA signal generates the power for 1C, & a series resistance generating a voltage drop are fed to display the process parameter. The rangeability is added parameter. The rangeability is added with zero, span calibration trimpots. APPLICATIONS For local indication of process parameter in a huge plant Loop powered indicator is ideal since no power is required. These are used in steel, fertiliser, food, chemical, dairy, rubber & sugar industries.  

Frequency indicators are designed to display RPM of motors. The instruments accepts the inputs directly from proximity switches, alternators or magnetic pick-up sensors. These instruments are microcontroller based to give high accuracy & easy to handle. High or Low alarm can be given if required.

Three wire lead resistance compensation &cold junction compensation - Built -in. Drift free performance. Front panel access of ZERO, SPAN. Power supply for powering 2W transmitter available - optional. Retrasmission output - available - optional Linearisation - Built-in. DIGITAL PROCESS INDICATORS are designed to display the process value like temp., pressure, flow, pH etc. These instruments accept 0/4 - 20 mA or 0/1 - 5 V DC sigals from transmitters as well as direct signals form temperature sensors. The Zero, Span adjustments are accessible from front panal. The process indicators employs state-of-the-art technology. The design having highly stable constant current source & reference supply , With very low temperature drift. The rugged DIN standard box with 2.5 mm2 screw type terminals for electrical connections are the added features.   COLD JUNCTION COMPENSATION Built-in. OPERATING TEMP OPERATING HUMIDITY 10 to 50 0C 90% Rh N. C. max. DIMENSIONS 48X96X175mm 96X96X175mm or 96X96X100mm 72X72X100 mm 72X144X175 mm CUTOUT 92X46 mm, 68X68 mm, 92X92 mm MOUNTING WEIGHT MODEL Panal Mounting 1.5Kg approx. 101- 31/2 digit LED display 102-41/2 digit LED display 101R-PMOO input 101M-T/C input 101V-Voltage input 102R- PMOO input 102M- T/C input 102C- 0/4 to 20mA input   FEATURES 31/2 digit & 41/2 digit 0.5" height 7 segment RED Display. Built-in Cold Junction compensation & three wire lead resistance compensation. Linearisation for PMOO & T/Cs. Accuracy +/- 0.2 % of F. S. typical. Front panel access of zero, span power supply for powering 2 wire transmitters available-optional. Rugged DIN standard enclosure.    

IP 55 or flame proof versions available. Local indication 31/2 digit LCD available. High accurancy, very low temp, drift. Built - in cold junction Compensation & three wire lead resistance compensation. CMRS certified explosion proof housing for Gr. II A, II B, II C. Upscale / down scale for open sensor. ON line easy calibration by Zero & Span. GENERAL DESCRIPTION   Analogik 2 Wire 4W temp, transmitters accepts Pt -100 input & thermocouples & gives 4 to 20mA output proportional and linear to input signal. Direct sensor connections are eliminated, due to which long run cable for pt -100 & T/C are avoided gives economical solution. The rack mounted, G - rail, field mounting as well as pipe mounting versions are available. The flame proof version with CMRS certification for II A, B, C & E are available. In the head mounted 2W temp transmitter the sensor is attached at the bottom. FEATURES Three wire lead resistance compensation & built - in cold junction compensation High accuracy typically 0.2% of F.S. Drift free performance. Rack mounted,field mounted,Head mounted, 2" pipe mounted, G rail versions available. On - line calibration in case of flame proof version.     CONSTRUCTION & OPERATION   The glass epoxy, green masked, high quality components soldered PCB provides the drift free & reliable performance Low level signal mV from T/C & resistance of RTD are converted into voltage & fed to V to I converter. This further converts the signal into 4 to 20mA DC signal proportional to input. The highly stable current source & accurate reference is used to give good results. Up Scale or Down scale facilities are provided for sensor break protection.   APPLICATIONS   To avoid the signal loss & to avoid the expensive cables of the sensors the 2W - 4W transmitters is the best solution. This is used as an isolation between field operations & central room is large, the Analogik 2W - 4W transmitters is the best, economical solution    

FEATURES 3 1/2, 4 1/2 digit LED / LCD indication. Used to control the level of any liquids. Low temp, drift. MEASURING RANGE - Field selectable by DIP switch. Calibration - easy access of ZERO, SPAN potentiometers.   APPLICATIONS     Level transmitter or level indication are used for contineous level measurement as well as level control. These are used in many industries like Petrochemicals, Water treatment plants, Food, Sugar Mills, Chemical, Coal Industries.