Analytical Instruments Dealers in Pune

This transmitter is capable of measuring pH, mV and temperature. Thus pH sensor in combination with temperature sensor or REDOX sensor can be used as process sensors. The measurement results are displayed on LCD display.The output of this transmitter is fully scalable over the total range of sensor. During fault conditions the output can be programmed for 3.55mA or 22mA as per need.

Top Performance in a Sleek, Lightweight Design The MS 9535 portable pH meter is one of the most popular pH meters on the market. By utilizing an advanced, custom microprocessor, MS 9535 is able to perform pH, ORP and temperature measurements with high accuracy and fast response. The mV measurements auto-range and change resolution from 0.1 to 1 mV when readings reach ±699.9 mV. pH slope changes due to temperature variation are automatically or manually compensated for, from -20 to 120°C (-4.0 to 248.0°F). The meter has 3 standard buffer values (pH 4.01, 7.01, 10.01), and automatic buffer recognition to avoid errors during calibration. When powered on, the percentage of remaining battery life is indicated on the display pannel. The HOLD function can freeze the reading on the display to be manually recorded at a more convenient time. Choose from °C or °F. Users can enable ordisable the Auto-off feature, the acousticsignal and the back-lit display. In addition, MS 9535 indicates the buffer values used for the most recent calibration. Features : Small form and lightweight Battery life displayed on LCD Auto shut-off   Specifications : Range: pH : -2.00 to 16.00 pH mV : ±699.9 mV; ±1999 mV Temperature : -20.0 to 120.0°C / -4.0 to 248.0°F Resolution pH : 0.01 mV : 0.1 mV; 1 mV Temperature : 0.1°C / 0.1°F Accuracy (@20°C) pH : ±0.01 mV : ±0.2 mV; ±1 mV Temperature : ±0.4°C / ±0.8°F pH Calibration : automatic, 1 or 2 point with 3 memorized buffer values (pH 4.01, 7.01, 10.01) Offset Calibration : ±1 pH Slope Calibration : 75 to 110% Input Impedance : 1012 Ohm Temperature Comp. : automatic, -20 to 120°C (-4 to 248°F) or manual without temperature probe pH Electrode : MS 2341B, double junction, gel filled PEI body, BNC connector, 1 m cable (included) Temperature Probe : MS 8773 with 1 m cable (included) Battery Type / Life : 9V / approx. 150 hours of continuous use; auto-off after 20 minutes of non-use or disabled (user- selectable) Environment : 0 to 50°C (32 to 122°F); RH max 100% Dimensions / Weight : 164 x 76 x 45 mm (6.5 x 3.0 x 1.8’’) / 180 g (6.3 oz.) ORDERING INFORMATION MS 9535 is supplied with, pH Sensor, temperature probe, battery, and instructions.

• Driven Type: Battery, Electric
• Color: Creamy, Off White
• Condition: New
• Automation Grade: Manual, Seni Automatic
• Application: Combustion Gas Anlysis, Flue Gas Analysis
• Certification: CE Certified, ISO 9001:2008
• Feature: Accuracy, Digital Display, Highly Competitive, Light Weight
• Weight: 0-5kg
• Country of Origin: India
• Detected gas: CO, DERIVED CO2, NOx, O2, SO2
• Voltge: 9-12VDC

• Power: 230 V
• Brand Name: DMS
• Response time: 0.33 sec

Ranked amidst the celebrated Suppliers of PH Transmitter, we are customers' reliable choice in the industry. To handle both automated inbound and outbound orders, we have exceptional warehousing solutions. We keep the wide array of products sorted in the warehouse to make sure that the delivery commences systematically. Approx Price : Rs 8,500 / Piece

• Brand Name: BSS
• I Deal In: New Only
• Usage/Application: Industrial
• No Of Digit Display: 4 Digit
• Power: 230 V AC

• Feature: Accuracy and Reliability
• Brand Name: N. P. Electronics
• Condition: Good
• Product Name: Gas Analyzer
• Variety: Gas analyzer 8050, exhaust gas analyzer 8020, portable gas analyzer etc.
• Place Of Origin: Pune,Maharasthra

We manufacture various types of Gas Analyzer which includes gas analyzer 8050, exhaust gas analyzer 8020, portable gas analyzer etc. Our gas analyzers are equipped with various superior features, thus increasing the accuracy and reliability of the analyzer. The gas analyzers which we manufacture are provided with an automatic warm-up facility and also with a back up battery. We provide gas analyzers at the most reasonable rates.

• Accuracy: +-0.1 %
• Size: 27 mm x 21 mm
• Resolution: 0.1 pH
• pH Value: 0.00 to 14.00 pH
• Temperature: -5 to 90 Deg C

• FEATURES: Very accurate , fast , process using latest microprocessor. Analysis within 2 to 3 minutes.

This is a Microprocessor based Digital System for Automatic Thermal Analysis & Temperature Measurement of Molten Iron. It enables in determination of % Carbon Equivalent, % Carbon and % Silicon of unalloyed cast iron.

• Resolution: 0.01 pH
• Accuracy: 0.1 pH; +/- 1 digit
• Temp. Compensation: 30°C Fixed
• Calibration: Two Buffer Calibration (Manually) 7; 4; 9.2pH
• Power Supply: 230VAC; +/- 10%; 50Hzs
• Range: 0.00 to 14.00 pH
• Input Impedance: 10 Ohms
• Display: 31/2 Digit LED Display with Auto polarity & Decimal
• Environment: 5 to 50°C
• Dimension: 96X96X65mm (ABS Plastic Cabinet) Panel Mount
• Weight: 0.5kgs (Approx.)
• Standard Accessories: Manual
• Current Output: 4-20mA (Optional)

• Power: 9VDC
• Usage/Application: Laboratory
• PH Range: 0.00 to 14.00 PH
• Features: Low Cost Plus High Performance - offers laboratory-quality readings for a very economical cost, Mult

• Features: High power LED Volume or light sheet Synchronization PIVTecILA software Easy setup Background illumination ILA.PIV.Nano Camera Also suited for MicroPIV Etc
• Specifications: Pulses 0...200A Power 0...47mW/ cm2 Colours green, blue, red, white, UV Length 120mm (without op

Particle Image Velocimetry is a non-intrusive laser optical technique used for determination of the velocity distribution in fluids. The complexity of a system can strongly vary depending on the type of application, however the basic principle of PIV stays the same. For the purpose of PIV, the fluid is seeded with light scattering particles, which are believed to follow the flow dynamics. The flow is illuminated by a concentrated light source, normally a laser, where as a special camera is acquiring the reflected light from tiny particles in the flow. The camera takes two consecutive images which are synchronized with the two light pulses. The light pulse is very short such that single particles can be identified in the images without blurring effects. The cross correlation software then calculates the displacement of the particles between the first and second image. Since the time between the two light pulses is known, the velocity field can be calculated.

• Model: 3000MB
• Brand Name: Teledyne,USA

• Analyses up to four gases out of O2, CO NO, NO2, and SO2,• Measuring range extension for high gas concentrations• Industrial probes to with stand higher stack temperatures• Cross sensitivity fi lters for CO and NO sensors

Features : It is a quality test equipment for cement industry. It is used to determine the percentage of free lime in cement or clinker sample. It is an automatic system based on advanced technology of conductivity principle. It gives accurate results in very less time as compared to traditional method. It requires very little quantity of ethylene glycol per cycle which results in effective saving of ethylene glycol. Direct display of result is available. Manual errors & fatigue are fully eliminated. It operates through advance electronic control system. Easy to operate & almost maintenance free.

• Model Number: PO - 650
• Brand Name: Aster
• Resolution: 0.01
• Accuracy: +-2%
• Testing Range: 0-14
• Place of Origin: Pune

With years of experience in this domain, we have carved a niche for ourselves, in offering a wide assortment of ph meter. These are designed with utmost precision, the offered meter are manufactured using high grade raw material and advanced technology. These are used to check the ph of any fluids whether it is acidic in nature or base. Further, our entire range is offered at most reasonable prices to our clients. Features: phtime proportionate controlling individual set point based relay operation sensor provided with proper housing & tee ensuring rigid handling of the sensor alarm acknowledgement facility unique ip65 enclosure panelfield mounted on line measurement 4-20 ma out put from meter for your other applications traceability to ertlnabl standards programmable control delay easy calibration using front keys technical specifications: physical dimensions -105 x 105 x 130 mm cut out for panel -92 x 92 mm enclosure- abs weather proof ip 65 mounting -fieldpanel supply- 230 v ac 10 % , 50 hz or 110 v ac or 24 v dc alarms- separate led indication for high & low relays -individual high & low relay 5a @ 230 vac (programmable through entire range with settable control delay & hysteresis ) control operation -alarmauto resetcontrol accuracy -± 2% of fsd resolution -0.01 display -4 digit 7 segment led16 x 2 alphanumeric lcd (optional) calibrationset point- using front panel keypad range - 00.00 to 14.00 ph output - 4 - 20 ma (optional)rs 485 (optional) meter operation modes -the meter can be operated in three modes. (based on relay operation) control mode - in this mode, the relay gets energized and will be time proportionately energized between the set value and the hysteresis. Alarm mode- in this mode ,the relay will remain energized as long as it is not acknowledged. Auto reset mode - in this mode, the relay gets automatically reset within 2 seconds.

• Country of Origin: India
• Type: Power Analyzer
• Weight: 0-1Kg
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 3-6kw
• Driven Type: Electric
• Brand Name: Treffer

• Application: Laboratory
• Range: 0-14pH
• Resolution: 0.01digit
• Accuracy: 0.1pH +/- 1 digit Of reading
• Input Impedance: 1012 Ohms
• Dual Display: Upper For pH (Red LED) & Lower for Temp. (Green LED)
• Temp. Compensation: 0-150c Manual Or Auto ( PT-100)( Optional )
• Calibration: 3 point Auto Calibration 7.0, 4.0 & 9.2
• Error Indication: Out Off Buffers Range. (B) Slope Error
• Control Setting: Two Set Point ( High & Low)
• Output: 4-20mA D.C ( Optional )
• Controlling Output: One Changeover Relay of Potential Free Contacts Of 5Amp
• Environment: 5 to 50c.
• Supply: 220v A.C +/- 10%, 50Hzs A.C
• Size: 96 x 96 x 110 mm ( Gray Color ABS Plastic Housing, Panel Mount )

• Measuring Range: 0-14 pH (4-20mA)
• Output:  4-20mA (scalable to 0-14 pH),500 Ω at 24 V DC
• Operating Temperature: -25 to 70 Degrees C
• Accuracy: ±.02pH (±2mV)
• Input:  pH electrode with BNC connector, Solution ground
• Power Requirement: 12-24 V DC
• Temperature Compensation: Automatic
• Repeatability: ±.01 pH (±1mV)
• Linearity: 0.1% of Span

The P-420 (encapsulated PH Transmitter) is a 2-wire, 4-20 mA PH transmitter having encapsulated construction, High performance and compact size. It can be interfaced with any display and control devices requiring a 4-20 mA input.Transmitter accepts input from any PH combination electrode through BNC Connector. It transforms the PH signal to a 4-20 mA Current proportional to the PH level 4-20 Output from PH transmitter can be transmitted over two wires to control device. Same two wires used to suppy power to loop.Any 12-24 VDC Power supply can be used. There are two adjustments on transmitter to standardize probes for "ASY" and "SLP".Features:• 4-20 mA Loop Powered•  Easy To Use• Compact Size• Adjustable ASY and SLP

• Voltage: 220/230 Volts
• Frequency: 50Hz-65Hz
• Display: 3 ½ Digit
• Resolution: pH =0.01 pH, MV =1 mv
• Accuracy: pH= 0.01 pH (Relative), MV= 0.1% +-1 Digit
• Range: pH =0 to 14 pH continuous, MV= 0 to +-999 mv
• Temp Compensation: 0-100 0C (Manual)

Supplied Complete with combined pH electrode with Gold plated BNC Connector, Two plastic bottles, Electrode stand and instruction manual.    Optional Accessories Automatic Temp. Compensation with PT-100 probe extra 8400.00 PH Electrode -14 PH 5600.00

• Brand Name: EET
• Color: White
• Application: ETP stp
• Feature: Weather Proof
• Packaging Type: Paper Packet

Cod Bod pH tss 

• Size: 600*600*400
• Type: A
• Model Number: 001
• Brand Name: Eet
• Material: Ms
• Weight: 8kg
• Color: Wight
• Warranty: 1 year

Good 

Quantum magnetic resonance analyzer It contains quantum analyzer and Low frequency physiotherapy functions, and Low frequency physiotherapy functions contains the slipper and paster functions( Also known as TENS Therapy ). So it contains Quantum analyzer, Slipper functions, Paster functions.

• Type: Hplc System
• Certification: CE Certified
• Display Type: Digital
• Driven Type: Electric
• Pressure Range: 40-80 Mpa
• Temperature: 5-85 Degree C
• Automation Grade: Automatic
• Application: Laboratory Use

Knauer GmbH make HPLC SYSTEM