Autoclave & Sterilizer Components Dealers in Pune

Technical data Applicable for the refrigerants R717 (ammonia, Nh3), HFC, HCFC (e.g. R22, R134a, R404a) and other refrigerants dependent on sealing materials compatibility within a temperature range of -30°C/+100°C Flammable hydrocarbons are not recommended.    Pressure setting range : 10-25 bar (145-363 psig) the valve is designed for strength test : 40 bar (580psig). Leakage safety: Same as set pressure. For further information please contact your local Castle Sales Distributor.   Important : The CSRVA safety relief valve is dependent on the back pressure (if the back pressure is higher than the atmospheric pressure, the opening pressure will be higher than stated set pressure) Special circumstances such as vibrations (which should be avoided) and oscillating pressure may require an increased difference between the operational pressure and the closing pressure.   Pressure Setting : The operating pressure of the plant should be at least 15% below the set pressure. This allows a perfect re-seating of the safety relief valve after having been activated. .   Temperature Range : -30/+100°C.

• Usage: Industrial
• Specialities: Superior Performance
• Type: Vacuum Generator
• Brand Name: Schmalz
• Country of Origin: German
• Operating Type: Automatic
• After-Sales Service Provided: Yes

ECBPI Vacuum Generators are a new generation of intelligent vacuum generators that do not need compressed air. Their areas of application include mobile robotics, for example in autonomous warehouses or stationary handling tasks with collaborative robots (cobots).

• Type: Sterilization Rolls
• Color: Off White, White, Blue
• Feature: Bright Color Transfer, Eco-friendly, Fine Finished, Strong Adhesion, Good Quality,Easy To Use
• Pattern: Plain
• Condition: Good, New
• Packaging Type: Roll

The special design of the valve enables it to be used extensively for all hydraulics and industrial purposes. KKI put forth these valves in front of you which are known for delivering optimum output and are easy to install.

The impregnation vessels are available in different options such as top loading and front loading. This can be offered depending on the application and handling facility available at work station. Vacuum impregnation is the most important process for electrical insulation. CEE DEE VACUUM designs, manufacture and installs vacuum pressure impregnation plants suitable for all types of impregnation varnishes, oils, resins etc. The plants are useful for impregnation of LTHT motors, generators coils, HV motors. The system can be designed for special applications like silver nitrate impregnation, carbon impregnation etc. In this case, the pressure applied is critical and needs special care.

• Type: Electric Water Heaters, Automatic
• Color: LIght White, White
• Voltage: 220V, 380V, 440V
• Condition: New
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw, Upto 600 KW
• Temperature Capacity: 100-150C, 150-200C, 25-50C, 50-100C
• Brand Name: PE
• Material: As Per Requirement
• Capacity: 3KW To 600KW
• Warranty: 1 Year, 5 Year And 12 Year
• Application: Boiling Water
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Energy source: Electric
• Style: Plug And Play
• Application: Fluid HEating
• Insulation Material: PUF / Rockwool

• Material: Casting
• Color: Blue
• Type: Pressure Safety Valves
• Application: Gas Fitting
• Feature: Durable, Non Breakable

Safety or PRV -Pressure Release Valves are used at outlet of blower as a safety measure. When outlet passage of air is blocked or subjected to heavy load then system pressure increases creating back pressure on lobes. Which results in failure of lobes or tripping of Motor. PRV release the pressure to the atmosphere at certain set point to safeguard the compressor/blower system. When they used at suction/inlet they termed as vacuum safety valve. We provide range of PRV /safety valve and vacuum valve as per requirements and in different mounting sizes.They are factory set and tested for required pressure set point. MOC- CI, Brass. Type- Spring Loaded.

• Size: 1.1/2inch, 1.1/4inch
• Material: Metal
• Weight: 100gm, 1kg, 200gm, 500gm
• Color: Blue
• Feature: Durable, Good Quality
• Condition: New

Sterilization Rolls is used for ideal sterilization packing in hospital and clinical use. We share glorious credentials in the list of top Exporters and Suppliers of Sterilization Rolls. We make available Sterilization Rolls in colors, designs and sizes in order to meet the variegated requirements of the customers. Customers can avail Sterilization Rolls from us at the most affordable prices. Attributes : High tear strength Convenient for packaging various instruments and items Blue tinted transparent film Long lasting usage Easy identification of damages due to puncturing or tearing Color process indicators  : Steam, form and EO Multi sealed

• Material: Stainless Steel
• Size: 15 to 600 mm
• Pressure: 0.5 to 10 Kg
• Material Grade: SS304
• Model Name/Number: RJCCMFT
• Ends: Flanged End
• Packaging Type: Box

• Valve Size: From 1/2
• Material: SS 304/316,Cast Steel, Mild Steel & Other on request
• Media: Air, Water, Gas, Fuel
• Brand Name: Nutshell Engineers
• Usage/Application: Industrial
• Pressure: Medium Pressure
• Model: Srv01
• Size: 3/4 inch to 2 inch
• Condition: New
• Max Pressure: up to 40 bar

VOLFRAM offers Safety Valve for Steam & other media application with precise pressure release settings to avoid the mechanical damage to equipment & surroundings, injury to the operators, loss of production etc. because of the higher pressure rise. In the event of the Control valves malfunctioning, the equipment to which it is supplying steam or any other media needs to be safeguarded from increase in pressure. This necessitates the installation of a Safety valve at each equipment.   Features of Safety Valve: Complete SS316 construction Suitable for various medias Highly Robust Suitable for the chemical industries where there is corrosive atmosphere Comes with factory setting of safety pressure Easy to install Compact Design High Discharge Capacity Pressure Range upto : 0.5 bar to 18 bar Temp. Range upto : 280 Deg C Self Draining Body Design ensures no residues & corrosion   Applications of Safety Valve: Saturated Steam Compressed Air / other gases Cylinder filling stations Chemical plants equipments, reactors etc, Pressure Vessels End Connection Available : 15NB, 20NB, 25NB Screwed BSP and NPT

Safety Valve & Control valve division we manufacture all types of Pressure Relief Valve, Safety Valve, Thermal Relief valve & Control valves to meet the growing market demand of API & ASME requirements at our Safety Valve & Control Valve state of the art facilities near to Sanaswadi Pune under license of AST SpA Italy.AST SpA is a company who is pioneer in the manufacturing of pressure Safety Valve & Control Valve in Italy since the Fifty’s. AST SpA is specialise in manufacturing of Valves used for Urea, Melamine, Steam and valves for the Refinery, Petrochem, Fertilisers, Chemical Industries & having all the necessary accreditation in place and are approved & accepted by all the major consultant and Third Parties Agencies internationally. Our Safety Valve & Control Valve division operates to meet the customer expectations according to the statutory & regulatory requirement to increase the operational effectiveness customer satisfaction and ability to continuously improve.

Chaffoteaux is dedicated to providing accessible, low maintenance and efficient solutions. Since its beginnings, the brand has continuously brought innovation to its range of products and offers today, thanks to a rigorous control and the quality of the components, the best technology for a new generation of water heaters.    

• Voltage: 230v
• Brand: Bajaj
• Capacity(Litre): Three liter instat water heater
• Color: White
• Energy Rating: 3 Star
•  :  

• Material: BOPP, PTFE Fabric, Textured Paper
• Application: Clinic, Hospital, Laboratory & Pharma, Sealing
• Color: Brown-yellow, Creamy, Creamy-brown, Off White, White
• Adhesive: Acrylic Based, Hot Melt Adhesives, Nature Rubber, Pressure Sensitive, Silicon
• Adhesive Side: Double Sided, Single Sided
• Feature: Acrylic Based, Hot Melt Adhesives, Nature Rubber, Pressure Sensitive, Silicon
• Design Printing: Offer Printing, Plain
• Certifiacation: ISI Certified, ISO 9001:2008 Certified

This featured insert orifice is used in natural gas extractions, and is composed of 316 stainless steel. To manufacture the insert, a variety of CNC machining processes were applied. Using a Haas CNC lathe with live tooling, we turned each side, with the second side requiring a 1/2″ precision radius on top of a 15 degree lead-in angle. Next, we milled 4 slots 90 degrees apart, with .125″ in depth through 2 7/8″-16 UN-2A threads. Throughout the machining process we maintained tight tolerances of +.000″/-.005″, and a concentricity tolerance of .004″. To conduct inspection we relied on an OGP touch probe and a vision system CMM, as well as micrometers, pin gages, a custom thread gage, a drop gage, and an optical comparator. The final insert orifice featured 3.00″ round bar stock, with a 2.750″ outside diameter and a 2.020″ to 2.5625″ inside diameter. Each of 4 slots measured 2.188″ wide, and the total insert weighed 1/2 lb. We then labeled each carton with part and lot numbers, as well as the quantity. Packaging was limited to 60 parts per box, with each box weighing a maximum of 40 lbs. Included in each order was a raw material certification, complete with chemical and mechanical properties, and quality control verification. The project took 4 to 6 weeks to complete, and was then shipped to our client for use in the oil and gas industry.

It can also be advantageously used for most other applications on gases vapours, liquids and saturated steam systems involving small discharge capacities. The SRV12 Series valves are specially designed for steam but can be used on, liquids and gas as well. The valves are designed as per API 526 and meet the requirements of ASME Sec VIII-Division. SRV12 Valves are offered with IBR Certification Form III-C. The valves have a solid nozzle screwed into the valve body and is fully guided at the upper section of the valve body, increasing the strength of the valve assembly. Specially designed disc holder ensures full lift within 5% increase of pressure above the set pressure value. i.e. Over-pressure of maximum 5%. Blowdown of a maximum of 5% is achieved in this design. Superior lapping of the seat area ensures a high level of leak tightness at seat. Disc lifts above 14 of nozzle diameter which ensures that the certified flow of the safety valve is discharged. The Spring is selected and assembled with great care so that the valve operates precisely and a good leak tightness is achieved.

• Fusible Plugs: Fitted into the hydraulic line and which melt at 740C (1650 F)
• Frangible Elements: Which can be broken off in an emergency.
• Quick Manual Release: a feature on the Hydraulic Operator (Figure 7020)
• Solenoid Operated: suitable for automatic operation when incorporated into a system for remote operation.
• Fusible Plugs: Fitted into the hydraulic line and which melt at 740C (1650 F)
• Frangible Elements: Which can be broken off in an emergency.
• Quick Manual Release: a feature on the Hydraulic Operator (Figure 7020)
• Solenoid Operated: suitable for automatic operation when incorporated into a system for remote operation.

Hydraulically Operated Safety Valve has been designed as a rapid action, internal safety valve to facilitate the emergency shut-down of tanks and vessels used for the storage and transportation of LPG, Ammonia, Vinyl Chloride and other hazardous liquids stored at high pressure and usually at ambient temperatures. The valve will “FAIL-SAFE” under all conditions.\   PRINCIPLE OF OPERATION   The valve is normally held closed by a heavy duty stainless steel spring and hydraulic pressure is applied to hold the valve open. When the hydraulic pressure is released, the valve closes rapidly to ensure safe shut-down in the event of an emergency. Hydraulic pressure can be released by :  

Pressure Relief Safety Valve (Flanged End) exceeding set pressure the valve opens to discharge the excess built up pressure. after relieving excess pressure, the valve automatically returns to the original position. The SS internals (Seat & Plug) Ensure that there is no leakage while in operation. By replacing only the spring it is possible to change set pressure range.

• End Connection: Threaded
• Material: Mild Steel
• Pack Type: Box
• Operation Mode: Manual

• Display Type: Analog
• Scale Range: 0-80
• Packaging Type: Box
• Brand: PRS
• Dial Shape: Round

• Size: 3/4" to 8"
• Usage/Application: lpg, propane ng
• Pressure: Medium Pressure
• Valve Size: 3/4" thru 8"
• Finishing: Golden Yellow & Grey
• Working Pressure: 100 psig
• Brand: MAXON

We are Manufacturer, Exporter, Supplier, Authorized Dealer & Solution Provider. Our setup is situated in Pune, Maharashtra, India & majorly we serve our customers from countries like Shri Lanka, Bhutan, Bangladesh, Malaysia, Indonesian, Nepal, Europe, Africa, Gulf countries like UAE, Dubai, Bahrain, Oman, Qatar, Saudi Arabia, Egypt, Jordan, Lebanon, Syria, Yemen, Kuwait etc.

• Size: Lenght 85 to 92 mm
• Material: Mild Steel
• Brand Name: ALIF Tech
• Application: Industrial
• Model Name/Number: 351.XXX, ( 351.XXX ) Series
• Pressure: Medium Pressure

We are offering sterilization tray made of superior quality plastic thus eliminates the possibility of wearing off the sharpness of delicate instruments. Can withstand typical repetitive wet autoclaving process cycle with maximum temperature of 132⺠c and a pressure of 15 psi. The sharpness of delicate instruments. Transparent lid enables you to identify the instruments without opening the box and thus eliminating possibility of compromising sterility anytime prior to surgery. Snap-in lid allows trays to be accommodated in the available space within the sterilizer without a possibility of inadvertent opening.