Automotive Components Dealers in Bavdhan, Pune

The RACELOGIC Steering Wheel Sensor is designed to accurately measure a vehicle’s steering angle or torque in tests such as ECE R79, ISO 4138 and ISO 7401. It has a CAN interface, which means you can connect the sensor directly to the VBOX 3i Data logger. The sensor is light and compact, with high dynamic response and a fine resolution of steer angle (0.1°). Easy access push buttons make it quick and simple to zero the steer angle and torque, once mounting is complete. Existing steering wheel functions, such as vehicle control elements, will not be affected when using the Steering Wheel Sensor. A universal steering wheel adapter is also included, making it quick and easy to mount to any vehicle, without having to remove the actual steering wheel.   Features: • CAN Bus output – connects directly to your DAQ (such as the VBOX 3i) • Ideal for tests such as ECE R79, ISO 4138 and ISO 7401 • Steering torque range ±20‐200 Nm • Steering angle resolution 0.1° • Can be calibrated to ISO 17025 standard • Quick and easy to install - supplied with a universal mount • Does not interfere with the vehicle’s steering wheel controls

Spring clip are ideally suited for trim strips, access plates, or any light application where removability is important. Standard Trim Clips are designed for use over rectangular studs or integrally molded blades ribs. This Trim Clip attaches onto the rib with push-on force. Then the assembly easily mates with the structural panel with a push-to-snap-in force. Insertion and pull-out forces vary depending on the mating panel hole configuration,

The Coleman Multi-Color LED Headlamp with Realtree  AP camo has a light for just about anything you need to do hands-free outside. Easily change beam colors with the twist of a dial. The white light is a high-power beam with up to a 256 ft. (78 m) range. The red mode offers enhanced night vision and the blue mode is ideal for outdoor activities like hun High-power, water resistant Cree® XP-C LED 5 different light settings: High/Medium/Low, Red, Blue 75 lumens of light on high 7.45 hours of runtime on high Includes 3 AAA batteries

• Type: Profi 28 NC / CNC
• RAM Repeatability: 0.02mm
• Maximum bending force: 28 tons
• Size: 300mm long and 10mm thick.

The BOSCHERT Profi 28 NC and Profi 28 CNC are precision hydraulic press brakes. The extremely compact and robust structure of these machines and the twin guides guarantee ram repeatability of 0.02mm.   The Profi are designed to manufacture small parts and perfectly compliment your existing larger machines. By forming small parts on the Profi and larger parts your existing machines, plant productivity is greatly improved.   Standard tooling is Amada style, with other systems available on request. Material stops are adjustable vertically and horizontally and have stop fingers with two faces each.   With a maximum bending force of 28 tons, typical work could include parts up to 300mm long and 10mm thick.

• Material: Metal
• Color: Black
• Corrosion Resistance: Yes
• Vehicle Type: Four Wheeler
• Finishing And Coating: Zinc Plating
• Placement on Vehicle: Center

• Voltage: 12V
• Average Lifetime: Average Lifetime
• Lumens (light output): 60
• Wattage: 55W
• Bulb Material: Glass
•  :  

This is due to our rich industry experience and knowledge; we are able to offer optimum quality Automotive Rubber Components. Our range is manufactured strictly as per the globally accepted norms, thus, you can rely on us completely. We specialise in supply of various automotive rubber components such as rubber hoses & pipes, automotive O rings, all types of automotive seals, rubber mounting pads, rubber bellows and shock absorption rubber products and other various customized items. These are manufactured from utmost superior quality raw material and hence are of highest quality as per our customers needs.

Evaluation of steering effort and self centring effciency are important parameters for R & D, products develpment and vehicle testing applications as per national / international standars. Specially designed for evaluation of above parmeters of steering system as per standards requirments & on site dats analysis and display. It has large LCD display with high speed data acquisition & storage hardware.

Our models facilitate thorough understanding because they are actual systems, apart from being life-sized. All details of construction and working of almost every component are clearly exposed. Different working systems are coloured differently to make learning easier. All systems are moving/operational (wherever applicable), thereby ensuring that their working can be demonstrated effectively.The cut section is so taken as to expose internal working parts.The system consists of,1. Brake pedal2. Master cylinder3. Brake pipe, Brake flexible hose4. Drum, wheel cylinder, brake shoe, etc5. Stand

Curtis Steering Sensor Units replace conventional steering columns on steer-by-wire electric power steering systems. They are fully integrated electromechanical units consisting of a shaft, bearings and sensors. Steering Sensor Units convert the mechanical movement of the steering wheel into a dual-redundant electrical signal that provides steering wheel position, steering speed and direction data to the steering control system.

Synchronizes speeds of rotating components, and prevents engagement of gears until synchronization is achieved.

We manufacture fuel level gauges with great precision as they play an important role in indicating the crucial levels. Our level gauge system has no moving parts except the needle on the cockpit which makes it more durable and long lasting. Available at a competitive price range, this product is used to indicate the level of fuel in a fuel tank. It has a horizontal dial for easy reading.

We cater you a large variety of auto components that can be delivered as per the client’s demand & requirements. We offer you one of the best ranges of cast iron automotive components that are not available anywhere else. Moreover one can place large, medium or small scaled order for auto components. In addition, we are widely well reckoned as the genuine cast iron auto components exporter from india.

• Country of Origin: Made in India
• Brand Name: Radhan
• Bubble Size : 10 mm
• Shape: Rectangular
• GSM: 40 GSM

Automotive Components VEHICLES HOMOLOGATION SUPPORT WORK

• Brand Name: N. P. Electronics
• Product Name: Automotive Components
• Packaging: Bulk
• Place Of Origin: Pune,Maharasthra
• Condition: Good

We offer automotive components. automotive components vehicles homologation support any types

• Material: Natural Reclaim Rubber
• Feature: Light Weight, Smooth Surface
• Type: Natural Rubber
• Country of Origin: India

We are the leading manufacturer and exporter of exercise bands in Natural Rubber ( Latex) and In latex free.  We are suppling our product to many leadiing brands for sports and rehabilation.

Synchronizer Rings, slam shut off valves, LPG Conversion Kits, Bearing Caps

automobiles components, Automobile Parts, Plastic Parts, automobile fabric

car audio stereo, car dipper light, Car Floor Mats

throttle position sensors, motorsport sensors, Rotary Position Sensor

oil seals, epdm rubber tube, epdm hose pipe, Silicone Rubber Mold

Magnetic Pick Up, Engine Bearings, Glow Plug

auto components (all forgings, alternate fuels, Brass Forgings

Industrial Rubber Products

Steam Silencers, MS Finned Tube, super heaters, hp heaters

auto machine components, auto bolt, Cold Forging Components

Automotive Component, auto components castings

Automobile Components, Engineering Equipment