Automotive Sensors Dealers in Pune

• Material: Plastic
• Operating Temperature: -20 to 70 Deg C
• Usage: Automotive
• Supply Voltage: 12 to 48V DC
• Weight: 50-100gm

• Application: Energy Saving
• Brand: ECO-Energy
• Detection Angle: 360 Degree
• Detection Distance: 20 meter
• Power Source: 220-240 V AC
• HF System: 5.8GHz CW Radar ISM Band
• Transmission Power: < 0.2 mW
• Ambient Light: < 3- 2000 LUX
• Time Delay: 10 Seconds- 7 Minutes
• Mounting Height: 1.5-4 m
• Working Temperature: -20 to +40 Deg C
• Rated Load: 1200 W
• Motion Detection Speed: 0.6- 1.5 m/s

Curtis Steering Sensor Units replace conventional steering columns on steer-by-wire electric power steering systems. They are fully integrated electromechanical units consisting of a shaft, bearings and sensors. Steering Sensor Units convert the mechanical movement of the steering wheel into a dual-redundant electrical signal that provides steering wheel position, steering speed and direction data to the steering control system.

• Material: Plastic
• Brand Name: VATS
• Model Name/Number: JT-121 PP Paddle wheel Flow Sensor
• Media: Liquid
• Accuracy: +/-1%FSD
• Connection Type: Threaded, welded Flange end ,stub end,TC End

• Type: Speed Sensor
• Application: Speed Reading
• Color: Blue
• Condition: New
• Warranty: 1year

based on a range of high accuracy gps engines, vbox speed sensors offer the ultimate non-contact measurement solution. with 5 hz, 10 hz, 20 hz and 100 hz gps update rate options available, the speed sensor range suits a variety of budgets and requirements. the 10 hz, 20 hz and 100 hz gps units are also compatible with the dgps base station for increased positional accuracy. the 100 hz speed sensor and the base station track the russian glonass range of navigation satellites as well as the normal gps constellation, using almost twice as many measurements for accurate results and reception in areas of poor satellite visibility. vbox speed sensors are perfect for automotive testing, motorsport, marine, telematics, and data logging applications. the ip66 rating means that each unit is water and dustproof, allowing them to be used in a variety of conditions. data output is via can bus, offering easy integration with data loggers and testing applications. each speed sensor also features analogue and digital outputs. the analogue output can be assigned to vehicle speed, lateral acceleration, longitudinal acceleration, or lap beacon marker with user selectable scaling. the digital output can be configured as either a digital speed pulse output or a lap beacon marker.   features  high performance gps receiver (5 hz – 20 hz), gps/glonass receiver (100 hz)  can bus output of position, velocity, distance, time, heading, height, vertical velocity, longitudinal and lateral acceleration, trigger to zero distance, trigger time, trigger speed, radius of turn  rs232 serial output of nmea*, position velocity and time  user configurable analogue + digital outputs  virtual lap beacon output  compatible with dgps basestation*  rugged deutsch asdd autosport connector  high quality aluminium enclosure  ip66 rated: water + dustproof  wide 6.5 v – 30 v operating range and low current consumption  

PIR Motion Sensor (Model : SM02)  are energy saving devices used for home energy saving and industrial energy saving. This infrared motion sensor switch detects movement like human movement, opening of a door, movement of a car in a car parking area and keeps the lights, fans etc ON. IT turns OFF the appliances when its detection area is vacant, saving a considerable amount of energy.Features Very attractive shape & compact size, White ABS plastic body, Good quality sensor element (dual sensor element) Top quality Fresnel lens, Semi conductor re-settable fuse, Short circuit and supply surge protection, Zero cross switching, Ceiling / wall mounting option - Can be erected on ceiling or wall, Detection range : 360degree x 8 mtrs ON time adjustable from 70 seconds to 20 min, Lux level adjustable from day mode to night mode - The unit can be set to work at a desired lux level. Detection area adjustable from low to high 24 months warrenty. Specifications Supply voltage : 230 volts +/- 10%age Safe Load : 500watts Detectable motion speed : 0.5 to 1.5 mtr/sec

• Brand Name: Forculus
• Color: White
• Voltage: 230VAC
• Frequency: 50HZ
• Power: 5-10Amp
• Setting Range: 1500-3000pF

Motion Sensor with Timer and Sensativity Settings.

SFL-02 is a LED based Fuel Indicator designed using advanced automotive grade components. It can be deployed on any stationary or mobile fuel tank level measurement. The system provides Fuel Level Indication on Circular LED bar. SFL-02 can directly replace the analogue fuel gauge without changing the panel cut out or wiring. SFL-02 is a LED based Fuel Indicator designed using advanced automotive grade components. It can be deployed on any stationary or mobile fuel tank level measurement. The system provides Fuel Level Indication on Circular LED bar.

We are a high-flying name in this arena and thus, strive hard to deliver the best in class products to the clients. Also, we source the basic material from the reliable places. Our team of quality analysts ensures that the offered product is of unmatched standard and free from any kind of flaws. Details : Usage - Used to monitor liquid flow rates in pipes Approx Price - Rs 15,000 / Piece Features : High performance Accurate measurement Elevated durability

Smartsaa offers hall effect proximity switches with high response speed. These switches are used for sensing speed of turbine, motors and high speed equipment. The hall effect sensor senses geared teeth and gives switching output. Application: speed sensing of turbine, motors, compressors and rotating equipments specification : supply : 10-30 v dc op : pnp or npn load current : 200 ma size : m 12 m 18 sensing distance : 1-2 mm object sensed : teeth of geared wheel max operating frequency : 100 k hz enclosure : ni cr plated brass, ip 67 operating temp : 70 degree cent

• Wetted Parts: Anodized Aluminium
• Flange: Aluminium or MS
• Enclosure: Aluminium or Plastic
• Probe Length: 150mm to 2000mm
• Input: 12 to 24V DC
• Output: 4-20mA, 0-5V, 0-10V, RS485 0/P
• Connection: 3 core cable l mt

Fuel level sensoris a low cost capacitance type level sensor. It is designed for monitoring levels in fuel tanks of vehicles, Bulk storage tanks fitted on vehicles, diesel storage tanks. The Design is simple & light weight. It measures the level accurately and reliably. The sensor output is connected to vehicle monitoring and tracking system or level indicators. The sensor consists of measuring probe which is encircled with a reference probe. This given more linear output and is not affected by turbulence inside the tank. Fuel Level Sensor As the fuel level increases, the capacitance value also increases. The fuel acts as the dielectric between electrodes. The increase in capacitance directly proportional to increase in fuel level. This change in capacitance is measured and converted into 4-20mA, 0-5V, 0-10V, RS485 O/P.

• Features: Excellent Motion Control, Supports DVP-S series left-side and right-side modules
• Application: Industrial
• High-speed Pulse Output: 4 Sets of 200 Khz Pulse Output
• Supports max.: 4 hardware 200 kHz high-speed counters
• Provides up to: 16 external interrupt pointers
• Benefits: Complete Program Protection

• Color: White
• Voltage: 240 V
• Features: Microcontroller based design , Power on delay Enable/Disable to avoid self alarm , Automatic temperature compensation , Programmable sensitivity , Wall / Ceiling mount , Relay output NO/NC Selectable
• Power Supply: 9-16V DC
• Output Alarm Period: Fixed 6 Sec
• Detection Angle: 88 °
• Detection Range: 23 mtrs
• Detection Motion Speed: 0.5 - 1.5m/s
• Humidity: 95 % RH
• Item Code:: PIR-723P
• Frequency: 50-60 Hz
• Brand Name: Reality Automation

Curtis Steering Sensor Units replace conventional steering columns on steer-by-wire electric power steering systems. They are fully integrated electromechanical units consisting of a shaft, bearings and sensors. Steering Sensor Units convert the mechanical movement of the steering wheel into a dual-redundant electrical signal that provides steering wheel position, steering speed and direction data to the steering control system.

• Features: Microcontroller based design, Power on delay Enable/Disable to avoid self alarm, Automatic temperature compensation, Programmable sensitivity, Wall / Ceiling mount
• Power Source: 220-240 V AC
• Application: Energy Saving
• Brand Name: Reality Automation
• Voltage: 240 V
• Frequency: 50-60 Hz
• Detection Angle: 180 Degree
• Detection Distance: 4 meter

• Type: Automatic Motion Sensor
• Certification: CE Certified, ISO 9001:2008 Certified
• Application: Energy Saving, Corridor, etc
• Voltage: AC 220-250 V
• Frequency: 50HZ
• Load power: Up to 300-1200 W
• Power Consumption: 0.1W (static) & 0.4(Work)
• Detecting distance: 10 to 12 m

Global Brake Wear Indicator Market research report gives a systematic and competent approach to gather important statistics of Global Brake Wear Indicator industry. In which includes industry chain structure, Brake Wear Indicator market classification, dominant market players, product definition, and product scope. Global Brake Wear Indicator Market research report also interprets different market scenarios along with future market trends. Global Brake Wear Indicator research report performs SWOT analysis to gain better insights on Strengths, Opportunities, and Threats muddled in Brake Wear Indicator industry. Brake Wear Indicator Market dynamics, production capacity, consumer volume, supply to demand ratio, Brake Wear Indicator market share and revenue is also deliberated in this research report.

Motion Sensor used for special for security purpose. Category: Security Systems

• Country of Origin: Made in India
• Connector: AMP
• Brand: Curtis
• Friction Torque: 0.20 Nm
• Max Axial Force : 1700 N
• Cable: 24 AWG

Evaluation of steering effort and self centring effciency are important parameters for R & D, products develpment and vehicle testing applications as per national / international standars. Specially designed for evaluation of above parmeters of steering system as per standards requirments & on site dats analysis and display. It has large LCD display with high speed data acquisition & storage hardware.

• Shape: Round
• Color: White
• Type: Ceramic LED Bulb
• Wattage: 15W
• Lighting Color: Warm White
• Body Material: Ceramic
• Base Type: B22

• Type: SENSOR
• Material: magnet, steel
• Brand Name: CUMMINS
• Payment Terms: T/T (Bank Transfer)
• Usage/Application: generator

• Country of Origin: Made in India
• Material: Metal, Plastic
• Accuracy: +/- 1 %
• Operating Temperature: -40 to 80 DegC
• Packaging Type: Box

• Brand Name: Protocontrol Instruments

We are offering speed sensor. protocontrol offers various types of speed sensors to senses speed. The speed sensors are inductive type, magnetic pick ups, hall effect sensors, gear tooth sensors, encoders and photoelectric sensors. using signal from speed sensor further processing like speed indication (tachometer), zero speed, under speed, over speed protection can be achieved. The indication can be in rpm, mtrs. min or any other as per requirement. inductive proximity switches are generally used for speed sensing of metallic parts. these switches are exclusively used on conveyors. Switches from size m 6.5 to m 80 are offered having sensing range up to 50 mm. photoelectric sensors are exclusively used in spm and pharmaceutical machinery. Long range, sensor are used in heavy industries like crane. hall effect sensors and magnetic pick ups are ideal for speed sensing of turbine and geared wheel. They can sense speed up to 20000 rpm. direction speed sensors are also available giving directional output. protocontrol also offers digital speed indicators, tachometers & zero speed switches.

• Brand Name: R B Electronics

We are a leading manufacturer and supplier of diesel level probe. The offered range of diesel level probe is manufactured by our highly skilled professional using the raw material of optimum quality in adherence to the international quality standards. These mechanical diesel level probes are widely appreciated for robustness, sturdiness, optimum performance and longer service life. normally open type potential free contacts max current 200 ma dc height minimum 100mm to 1000mm (as per requirement) available in single, dual & three level(as per requirement

The Outdoor Motion Sensor, supplied by us, is weatherproof and has a wireless range of 200m. Only quality packaging material has been used for the packing of the products that we offer. Moreover, the entire packaging procedure is conducted under the supervision of the experts. Clients can rely on us for payment related procedure as we have adopted both online and offline modes for making safe and secure transactions.