Calibrating Machine Dealers in Kothrud, Pune

Model-DGCH - 25It's universal design enables it to calibrate both plunger and lever DTI's (Dial Test Indicators). It can also be used for calibration of bore gauges. The unit also determines gauge hyteresis which is not possible using conventional gauge blocks. This dial gauge calibrator can be used in calibration laboratories and also be used for roaming shop floor gauge calibration checks as it is a portable device. The test is performed by comparison with the master gauge. The calibrator uses the Abbe's principle. SPECIFICATIONS : 25 mm travel covering the majority of common indicators Accepts lever indicators with stylus up to 40 mm long Computer interface for efficient calibration reports. Plunger dials with 8mm or 3/8” shank can be tested. Bore gauges up to 150 mm can be checked. The standard Kit incorporates, Cary case ModelDGC-25 calibrator Master gauge (Baker Electronic Dial Gauge ED1) RS 232 cable to transfer output to computer with software Magnifying glass 3/8” to 8 mm stem mounting sleeve. Bore Gauge holding bracket and extension rod. For more details and enquiry please contact.

• Output Voltage Ranges: 0 to 300 V (L-N) or 0 to 520 Phase to Phase
• Mode: 3 Phase, 4 Wire

Make ZEAL Model ZM3ΦPEC Input 230 Volt AC Output Voltage Ranges 0 to 300 V (L-N) or 0 to 520 Phase to Phase Output Current Ranges 0 to 1.2 A & 0 to 6 A per phase Mode 3 Phase, 4 Wire Output ports Vr (Hi,Lo),Vy(Hi, Lo),Vb(Hi, Lo), Ir (Hi, Lo),Iy (Hi, Lo),Ib (Hi, Lo) PF Range 0.1 lag to Unity to 0.1 lead Compliance 20 VA, at FS on V ranges, Compliance: 20 VA, at FS on A channels Frequency 45 to 60 Hz With programmable timer counter to keep output ON for fix duration. Duration programmable in minute. Setting Voltage, current, frequency by potentiometer Power Factor by push button keys, timer by thumb wheel switches Metering Digital AC Voltmeter, Digital AC Ammeter , Universal meter to indicate PF, W, VA, VAr of each phase. Also average of all phases, WHr Programmable current display to accommodate any CT ratio Accuracy 0.15% FS±10 dgts for voltage & current , 0.05%± 1 dgts for PF , 0.3% FS for watt meter, 0.02% for time duration Whr: 0.35% Sinusoidal Outputs THD 1.5% Protections Overload and Short circuit Dimensions: W600 x D 600 x H 270 mmWeight: 40 kg without packing

Universal Calibrator is used for the calibration of many types of Process Control Instruments which accept mV, mA & RTD Input. This can be used as better tool for fault finding & confirmation of instrument sensor reliability, hence extremely useful for Commissioning Activity, Quality Assurance, Routine Maintenance & Trouble Shooting.

it's universal design enables it to calibrate both plunger and lever dti's (dial test indicators). It can also be used for calibration of bore gauges. The unit also determines gauge hyteresis which is not possible using conventional gauge blocks. This dial gauge calibrator can be used in calibration laboratories and also be used for roaming shop floor gauge calibration checks as it is a portable device. The test is performed by comparison with the master gauge. The calibrator uses the abbe's principle. specifications :25 mm travel covering the majority of common indicators accepts lever indicators with stylus up to 40 mm long computer interface for efficient calibration reports. Plunger dials with 8mm or 3/8” shank can be tested. Bore gauges up to 150 mm can be checked. The standard kit incorporates, cary case modeldgc-25 calibrator master gauge (baker electronic dial gauge ed1) rs 232 cable to transfer output to computer with software magnifying glass 3/8” to 8 mm stem mounting sleeve. Bore gauge holding bracket and extension rod. For more details and enquiry please contact.

• Display: 199.99 digits LCD type
• Selection: mV source, mV measure, mA source, mA measure, Resistance source, Resistance measure

ESD�s 310 is a portable battery operated calibrator suitable for calibrating field instruments. This can feed as well as measure mV, mA and resistance inputs. These calibrators are characterised by highly stable and precise output.

Electro Pneumatic Positioner, axial pneumatic valves

Circular Chart Recorder, single channel universal input data logger

MV / MA / RTD Mains Operated Calibrator