Calibrating Machine Dealers in Pune

• Humidity: Max 90% Rh Non Condensing
• Power Supply: Two Batteries of 9v, Size Pp3
• Indication: 4-½ Digit Lcd Display with Battery Low, Over-range and Polarity Indication
• Operating Temp: 0 to 55 deg C
• Effect of Temperature Change: 0.002% per deg. C ref 25 deg C
• Battery Life: For Continuous Operation 6 Hours- for Full Current Output and 30 Hours-for Mv/rtd Output
• Storage Temperature: 0 to 70 deg C
• Dimensions: 170 (H) x 90(W) x 45(D)
• Weight approx: ½ Kg

• Size: 170(H) * 90(W) * 45(D)
• Range: 200º to 600º C”
• Accuracy: ±0.1% of F.S. ( For 0 to 400º C)
• Resolution: 0.1º C
• Effect of Temp.Change: 0.002% per Deg.C ref 25ºC
• Battery Life: 30 hours approximately
• Storage Temp: 0 to 70ºC
• Load: 0.25 Watts
• Item Code: RS-803

• range: 50C to 500C

Using a Huminator you can quickly and easily calibrate humidity measuring instruments, probes and data loggers from testo and other companies. The Huminator calibration system is a high performance, stand alone temperature/humidity reference generator. It features a thermal servo system to stabilize temperature in therange of 50C to 500C. Relative humidity is rapidly generated in the range of 5% to 95%. With the special testo front panel of the chamber it is possible to calibrate various data loggers.

Model-DGCH - 25It's universal design enables it to calibrate both plunger and lever DTI's (Dial Test Indicators). It can also be used for calibration of bore gauges. The unit also determines gauge hyteresis which is not possible using conventional gauge blocks. This dial gauge calibrator can be used in calibration laboratories and also be used for roaming shop floor gauge calibration checks as it is a portable device. The test is performed by comparison with the master gauge. The calibrator uses the Abbe's principle. SPECIFICATIONS : 25 mm travel covering the majority of common indicators Accepts lever indicators with stylus up to 40 mm long Computer interface for efficient calibration reports. Plunger dials with 8mm or 3/8” shank can be tested. Bore gauges up to 150 mm can be checked. The standard Kit incorporates, Cary case ModelDGC-25 calibrator Master gauge (Baker Electronic Dial Gauge ED1) RS 232 cable to transfer output to computer with software Magnifying glass 3/8” to 8 mm stem mounting sleeve. Bore Gauge holding bracket and extension rod. For more details and enquiry please contact.

• Mains Operated with indication PC-UC-45-M  Model PC-UC-45-M tabletop universal calibrator is widely used for in-house calibration and testing of process control instruments. Mains Operated with indication, this Calibrator is simple in operation, high accuracy and stability which make it an essential instrument in production units, calibration and quality control laboratories service stations in instrumentation field. It comes with certification from authorized institutions like ETDC, ERTL, IDEMI. Model 45-M can be used as certified source for calibration with traceability to national standards.  Features :   Mains operated table top model. mV/mA source and sink. Potential free PT100 RTD simulator. Free calibration check facility for 5-Years.

Model 45-M tabletop universal calibrator is widely used for in-house calibration and testing of process control instruments. It's simple operation, high accuracy and stability make 45-M an essential instruments in production units, calibration and quality control laboratories, and service stations in instrumentation field. With certification from authorised institutions like ETDC. ERTL, IDEMI Model 45-M can be used as certified source for calibration with traceability to national standards

BAKER GAUGES INDIA PRIVATE LIMITED is dedicated to the pursuit of excellence in the field of dimensional metrology. We have embodied our wealth of experience and expertise in this fine science of measurement into our Calibration Laboratories, which are equipped with the most reliable and sophisticated world class measuring equipment available and operated under controlled environmental conditions. Our measuring equipment are periodically calibrated by National Physical Laboratory, New Delhi and our masters have National and International traceability.

The new Fluke 725 Multifunction Process Calibrator is a powerful yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter.

• Weight: 1.25 kg Approx
• Accuracy: 0.1 % ± 3 digits

Make ZEAL Model ZMPCM INPUT POWER 230 V ± 10% AC single phase DIGITAL METER (4½dgt)LED DC Current source Range 0 to 20mA Accuracy 0.1 % ± 3 digits DC Voltage source Range 0 to 200 mV Accuracy 0.1 % ± 3 digits RTD(fix 10 positions)-50,-25, 0, 25, 50,75,100,200,300,400˚CTransmitter Power Supply DIMENSIONS 24V DC (272 x 150 x 200) mm WEIGHT 1.25 kg Approx ACCURACY OF RTD SOURCE 0.1% OF SET TEMPERATURE

• Measuring Travel: 0-25 mm / 1 inch

Calibration of Dial gauges (Plunger & Lever Type) and Bore Gauges Suitable for 0.01 and 0.001 mm least count Interface with computer for DG Cal Software Graphical presentation for errors in both directions

Analogik universal calibrator is very useful tool to calibrate many types of process control instruments which accepts mV and mA and resistance. The universal calibrator is designed to give highest stability and accuracy. The calibrator can be used for lab or inhouse purpose as well as to used on field. This is very useful tool for calibration of instruments, commissioning, quality assurance and fault findings.

• Display: 199.99 digits LCD type
• Selection: mV source, mV measure, mA source, mA measure, Resistance source, Resistance measure

ESD�s 310 is a portable battery operated calibrator suitable for calibrating field instruments. This can feed as well as measure mV, mA and resistance inputs. These calibrators are characterised by highly stable and precise output.

Simply Powerful!The new Fluke 725 Multifunction Process Calibrator is a powerful yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter. MEASURE & SOURCE

it's universal design enables it to calibrate both plunger and lever dti's (dial test indicators). It can also be used for calibration of bore gauges. The unit also determines gauge hyteresis which is not possible using conventional gauge blocks. This dial gauge calibrator can be used in calibration laboratories and also be used for roaming shop floor gauge calibration checks as it is a portable device. The test is performed by comparison with the master gauge. The calibrator uses the abbe's principle. specifications :25 mm travel covering the majority of common indicators accepts lever indicators with stylus up to 40 mm long computer interface for efficient calibration reports. Plunger dials with 8mm or 3/8” shank can be tested. Bore gauges up to 150 mm can be checked. The standard kit incorporates, cary case modeldgc-25 calibrator master gauge (baker electronic dial gauge ed1) rs 232 cable to transfer output to computer with software magnifying glass 3/8” to 8 mm stem mounting sleeve. Bore gauge holding bracket and extension rod. For more details and enquiry please contact.

• Display Type: Digital
• Brand Name: Kusam-Meco
• Condition: New
• Power: 1.5V x 2 alkaline batteries.
• Weight: About 500g
• Model: Model KM-CAL-804
• Basic Accuracy: High+- 0.05%
• Max. Allowable Voltage: 30V
• Operating Temperature Range: 0
• Humidity range: < 80% RH
• Storage Temperature Range: < -10 Degree C
• Temperature Coefficient: 0.1 x (dedicated Accuracy) % / DegreeC (5 DegreeC
• Power Consumption: 400mA / 3V in condition of 1kW load 20mA output
• Dimension: 180 (L) x 90 (W) x 47 (D) mm (with protector)

• Input: RTD /mV /mA
• • Range: RDT= 100 to 400°C
• mV = 0 to 199.99 mV:  
• mA = 0 to 25.00 mA:  
• • Effect on Temp: 0.002% (REF 25°C ) 25°C )
• • Display: 4 1/2 Digit LCD
• • Accuracy level: ± 0.1% of Span
• 24VDC Loop Power with (Battery & Main Model):  

Feature :• Portable Battery & Mains ( 240VAC/50Hz) operated• LCD Display• Source and sink for mV, mA, & RTD• Light waight & with carry bag• Direct feed switch for mV/mA RTD• Power on switch

Presenting Multifunction Calibrators that are of top quality. We are one of the best known and trusted manufacturers, exporters and suppliers of Multifunction Calibrator all over the country. The Multifunction Calibrators manufactured by us are made from superior grade material. Our Multifunction Calibrators serve maximum efficiency, longer equipment life and users safety. These calibrators are available with us at reasonable market prices.

• Weight: 4.6 Kg
• Temperature Range: -30 C to 150 C at 23 C ambient
• Brand Name: Fluke
• Usage: Industrial
• Accuracy: +/- 0.4 C (+/- 0.72 F)
• Stability: +/- 0.1 C (+/- 0.18 F)
• Target Size: 57 mm
• Resolution: 0.1 Degree
• Size: 152 x 286 x 267 mm

Universal Calibrator is used for the calibration of many types of Process Control Instruments which accept mV, mA & RTD Input. This can be used as better tool for fault finding & confirmation of instrument sensor reliability, hence extremely useful for Commissioning Activity, Quality Assurance, Routine Maintenance & Trouble Shooting.

• Brand Name: Druck
• Display Type: Digital
• Humidity: 0 to 90% RH none condensing. To Def Stan 66-31,8.6 cat III
• Weight: 1.96Kg (4.3lbs) including batteries
• Model Name/Number: DPI-611
• Usage/Application: Industrial
• Storage Temperature: -20 to 70 Deg C (-4 to 158 Deg F)
• Ingress protection: IP 54. Protected against dust and splashing water from any direction
• Dimension: 270 x 130 x 120 mm (10.6 x 5.1 x 4.7 inch)
• Battery Life: 18 to 26 hours depending on functions
• Operating Temperature: -10 to 50 Deg C (14 to 122 Deg F). 0 to 40 Deg C (32 to 104 Deg F)

Electro Pneumatic Positioner, axial pneumatic valves

Circular Chart Recorder, single channel universal input data logger

rtd simulators

gas detector calibrators, Process Instrumentations, Measuring Instrument

Fluke 712B RTD Calibrator, Karl Fischer Moisture Analyzer

Masibus LC 12 The Ultimate Loop Calibrator

Precision Loop Calibrator, Hand-Held Temperature Calibrator

5 1 / 2 Multifunction Calibrator, Three Phase Power Energy Meter Calibrator