Calibrators Dealers in Karve Road, Pune

•  :  
• Make: Zeal
• Model: ZMCNTC
• Input Power: 230 V AC
• Range 1: 10 to 500 RPM Contact type, First wheel
• Range 2: 10 to 500 RPM Non Contact type, First wheel
• Range 3: 100 to 5000 RPM Contact type, Second wheel
• Range 4: 2000 to 100000 RPM Non contact type optical reflection affixed on second wheel ( x 20)
• No. of digits on display: 6 digits
• Accuracy: 0.05%± 2 dgt
• Stability of speed: 0.05%± 2 dgt (with or without contact load)
• Speed setting by multiturn potentiometer:  

Universal Calibrator, Electro Pneumatic Positioner, axial pneumatic valves

Model-DGCH - 25It's universal design enables it to calibrate both plunger and lever DTI's (Dial Test Indicators). It can also be used for calibration of bore gauges. The unit also determines gauge hyteresis which is not possible using conventional gauge blocks. This dial gauge calibrator can be used in calibration laboratories and also be used for roaming shop floor gauge calibration checks as it is a portable device. The test is performed by comparison with the master gauge. The calibrator uses the Abbe's principle. SPECIFICATIONS : 25 mm travel covering the majority of common indicators Accepts lever indicators with stylus up to 40 mm long Computer interface for efficient calibration reports. Plunger dials with 8mm or 3/8” shank can be tested. Bore gauges up to 150 mm can be checked. The standard Kit incorporates, Cary case ModelDGC-25 calibrator Master gauge (Baker Electronic Dial Gauge ED1) RS 232 cable to transfer output to computer with software Magnifying glass 3/8” to 8 mm stem mounting sleeve. Bore Gauge holding bracket and extension rod. For more details and enquiry please contact.

Universal Calibrator is used for the calibration of many types of Process Control Instruments which accept mV, mA & RTD Input. This can be used as better tool for fault finding & confirmation of instrument sensor reliability, hence extremely useful for Commissioning Activity, Quality Assurance, Routine Maintenance & Trouble Shooting.

• Display: 199.99 digits LCD type
• Selection: mV source, mV measure, mA source, mA measure, Resistance source, Resistance measure

ESD�s 310 is a portable battery operated calibrator suitable for calibrating field instruments. This can feed as well as measure mV, mA and resistance inputs. These calibrators are characterised by highly stable and precise output.

it's universal design enables it to calibrate both plunger and lever dti's (dial test indicators). It can also be used for calibration of bore gauges. The unit also determines gauge hyteresis which is not possible using conventional gauge blocks. This dial gauge calibrator can be used in calibration laboratories and also be used for roaming shop floor gauge calibration checks as it is a portable device. The test is performed by comparison with the master gauge. The calibrator uses the abbe's principle. specifications :25 mm travel covering the majority of common indicators accepts lever indicators with stylus up to 40 mm long computer interface for efficient calibration reports. Plunger dials with 8mm or 3/8” shank can be tested. Bore gauges up to 150 mm can be checked. The standard kit incorporates, cary case modeldgc-25 calibrator master gauge (baker electronic dial gauge ed1) rs 232 cable to transfer output to computer with software magnifying glass 3/8” to 8 mm stem mounting sleeve. Bore gauge holding bracket and extension rod. For more details and enquiry please contact.

Three Phase Power Energy Meter Calibrator, 5 1 / 2 Multifunction Calibrator

Universal Calibrator, Circular Chart Recorder